| Issue |
E3S Web Conf.
Volume 644, 2025
EUROGEO 8 - 8th European Conference on Geosynthetics
|
|
|---|---|---|
| Article Number | 04003 | |
| Number of page(s) | 9 | |
| Section | Design and Modelisation | |
| DOI | https://doi.org/10.1051/e3sconf/202564404003 | |
| Published online | 01 September 2025 | |
Geosynthetic overlap for reinforced piled embankment: Centrifuge modelling
University Gustave Eiffel, Lab. Centrifuges for Geotechnics (GERS-CG), France
* Corresponding author: This email address is being protected from spambots. You need JavaScript enabled to view it.
Abstract
The overlap of two geosynthetic strips, located at the base of the granular load transfer platform and above rigid inclusions, is being studied on small-scale instrumented models using the moving tray device in the geotechnical centrifuge at the University Gustave Eiffel. The width of the cover (in the range between zero and the pile spacing, for 3 area ratios of reinforced pile embankment) influences the efficiency of the load transfer and the differential settlement at the surface.
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.