EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 644 (2025) E3S Web Conf., 644 (2025) 04003 References
Open Access
Issue
E3S Web Conf.
Volume 644, 2025
EUROGEO 8 - 8th European Conference on Geosynthetics
Article Number 04003
Number of page(s) 9
Section Design and Modelisation
DOI https://doi.org/10.1051/e3sconf/202564404003
Published online 01 September 2025
  1. M. Almeida de S.S., M.E.S. Marques, Design and Performance of Embankments on Very Soft Soils. CRC Press, London (2013) [Google Scholar]
  2. M. Almeida de S.S., D.F. Fagundes, L. Thorel, M. Blanc, Geosynthetic-reinforced pileembankments: numerical, analytical and centrifuge modelling. Geosynth. Int. 27, 301–314. (2020) https://doi.org/10.1680/jgein.19.00011 [Google Scholar]
  3. ASIRI Recommendations for the design, construction and control of rigid inclusion ground improvements. ISBN9782859784706, Presses des Ponts, 383p (2013) [Google Scholar]
  4. ASIRI+ Improvement and reinforcement of soils by rigid inclusions. (2019) https://asiriplus.fr/ (accessed on 27th nov. 2024) [Google Scholar]
  5. G. Baudouin, F. Rosquoët, J. Canou, J.C. Dupla, L. Thorel, G. Rault, I. AndriaNtoanina, Caractérisation mécanique d’un mélange de sables d’Hostun. Journées Nationales de Géotechnique et de Géologie de l’Ingénieur Nantes 18-19 juin JNGG08. ISBN 9782720825204. pp 491–498. (2008) https://www.geotech-fr.org/download.php?type=pdf&doc=jngg-2008 [Google Scholar]
  6. M. Blanc, L. Thorel, R. Girout, M. Almeida de S.S., Geosynthetic reinforcement of a granular load transfer platform above rigid inclusions: comparison between centrifuge testing and analytical modelling. Geosynthetics international. February 2014, Vol.21, 1, pp.37–52. (2014) DOI: 10.1680/gein.13.00033 [Google Scholar]
  7. M. Blanc, G. Rault, L. Thorel, M. Almeida de S.S., Centrifuge investigation of load transfer mechanisms in a granular mattress above a rigid inclusions network. Geotext. Geomembr. 36, 92–105. (2013) https://doi.org/10.1016/j.geotexmem.2012.12.001 [Google Scholar]
  8. BS8006 Code of practice for strengthened/reinforced soils and other fills. BS8006-1. British Standard Institution. ISBN 978-0-580-53842-1 (2010) [Google Scholar]
  9. CUR226. See van Eekelen and Brugman, 2016 (below). [Google Scholar]
  10. D.F. Fagundes, M. Almeida de S.S., L. Thorel, M. Blanc, Load transfer mechanism and deformation of reinforced piled embankments. Geotext. Geomembr. 45, 1–10. (2017) https://doi.org/10.1016/j.geotexmem.2016.11.002 [Google Scholar]
  11. EBGEO Recommendations for Design and Analysis of Earth Structures using Geosynthetic Reinforcements EBGEO. John Wiley & Sons (2012) [Google Scholar]
  12. J. Garnier, C. Gaudin, S.M. Springman, P.J. Culligan, D. Goodings, D. Konig, B. Kutter, R. Phillips, M.F. Randolph, L. Thorel, Catalogue of scaling laws and similitude questions in geotechnical centrifuge modelling. Int. J. Phys. Modelling in Geotechnics ISSN 1346-213X, 7, n°3, pp 1–24. (2007) doi.org/10.1680/ijpmg.2007.070301 [Google Scholar]
  13. R. Girout, M. Blanc, L. Thorel, D.F. Fagundes, M. Almeida de S.S., Arching and deformation in a piled embankment: centrifuge tests compared to analytical calculations. Journal of Geotechnical and Geoenvironmental Engineering 142(12), 10p (2016) https://doi.org/10.1061/(ASCE)GT.1943-5606.0001557 [Google Scholar]
  14. R. Girout, M. Blanc, L. Thorel, D. Dias, Geosynthetic reinforcement on piledsupported embankment Geosynthetics International. Vol.25, n°1 37–49. (2018) https://doi.org/10.1680/jgein.17.00032 [Google Scholar]
  15. M. Guerois, Centrifuge parametric study of the geosynthetic overlap above piled embankment foundations. Internship report University Gustave Eiffel/ Polytech’Clermont.122p (2023) [Google Scholar]
  16. P. Gunnvard, H. Mattsson, J. Laue, Evaluating the Design Criteria for Light Embankment Piling: Timber Piles in Road and Railway Foundations. Appl. Sci. 12, 166. (2022) https://doi.org/10.3390/app12010166 [Google Scholar]
  17. A. Nancey, L. Briançon, Lessons learned from the ASIRI+ project on the use of geosynthetics in load transfer platform, Eurogeo8, Lille (2025) [Google Scholar]
  18. A. Huckert, Optimisation with numerical and experimental approaches of the mechanical properties of geosynthetic materials used in soil renforcement (in french). Ph.D. Dissertation, Univ. Grenoble. (2014) https://www.theses.fr/2014GRENI030 [Google Scholar]
  19. L. King, A. Bouazza, C. Gaudin, C.D. O’Loughlin, H.H. Bui, Behavior of geosynthetic-reinforced piled embankments with defective piles. J. of Geotechnical and Geoenvironmental Engineering, 145(11), 04019090. (2019) [Google Scholar]
  20. M.F. Msouti, J.C. Blivet, D. Levacher, Comportement au fluage des géotextiles en renforcement mécanique. Laboratoire central des ponts et chaussées. 143p. (1997) [Google Scholar]
  21. G. Rault, L. Thorel, A. Néel, S. Buttigieg, F. Derkx, G. Six, U. Okyay, Mobile tray for simulation of 3D load transfer in pile-supported earth platforms. 7th int. Conf. on Phys. Modelling in Geotechnics June 28thjuly 1st, Zurich, Springman, Laue, Seward (eds) Taylor & Francis Group, London, ISBN 978-0-415-59288-8, pp.261–266 (2010) [Google Scholar]
  22. P. Shen, C. Xu, J. Han, Centrifuge tests to investigate global performance of geosynthetic-reinforced pile-supported embankments with side slopes. Geotextiles and Geomembranes, 48(1), 120–127 (2020) [Google Scholar]
  23. B. Simon, L. Briançon, L. Thorel, Amélioration des sols par inclusions rigides : le rôle des géosynthétiques dans la plateforme de transfert de charge. Rev. Fr. Géotechnique 1. (2020) https://doi.org/10.1051/geotech/2020003 [Google Scholar]
  24. C. Terqueux, L. Briancon, P. Delmas, D. Jacqueline, J. Racinais, A. Pantet, P. Gotteland, Renforcement d’un sol compressible par inclusions rigides: étude des transferts de charge au sein de la plateforme granulaire renforcée par des géosynthétiques, in: 11èmes Journées Nationales de Géotechnique et de Géologie de l’ingénieur. (2022) [Google Scholar]
  25. L. Thorel, Physical Modelling Facilities: from Galileo to 3D Printing. Presented at the ICPMG 2022, 10th International Conference on Physical Modelling in Geotechnics, Korean Geotechnical Society, Seoul, Korea, ISBN 978-89-952197-7-5, 64–72. (2022) https://www.issmge.org/uploads/publications/53/115/P00503.pdf [Google Scholar]
  26. S.J.M. van Eekelen, A. Bezuijen, H.J. Lodder, A.F. van Tol, Model experiments on piled embankments. Part I. Elsevier Enhanced Reader. (2012) https://doi.org/10.1016/j.geotexmem.2011.11.002 [Google Scholar]
  27. van Eekelen, S.J.M., Brugman, M.H.A., 2016, Eds. Design Guideline Basal Reinforced Piled Embankments (called ‘CUR226’). CRC press, Delft, Netherlands, ISBN 9789053676240, in English. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.