| Issue |
E3S Web Conf.
Volume 648, 2025
International Conference on Civil, Environmental and Applied Sciences (ICCEAS 2025)
|
|
|---|---|---|
| Article Number | 01017 | |
| Number of page(s) | 11 | |
| Section | Civil Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202564801017 | |
| Published online | 08 September 2025 | |
Utilization of modified ash-based mineral powders in asphalt concrete mixtures for enhanced performance and sustainability
1 JSC “Kazakhstan Road Research Institute”, Department of Science, 010000 Astana, Kazakhstan
2 L.N. Gumilyov Eurasian National University, Department of Civil Engineering, 010000 Astana, Kazakhstan
* Corresponding author: This email address is being protected from spambots. You need JavaScript enabled to view it.
Abstract
This study investigates the feasibility and performance of asphalt concrete mixtures incorporating modified mineral powders derived from technogenic waste, specifically dry and hydro ash, as sustainable alternatives to natural fillers. Three mixture types were prepared: a reference using natural carbonate powder (Mix-1), a mix with dry ash- based powder (Mix-2), and a mix with hydro ash-based powder (Mix-3). The mineral powders were activated with an organo-mineral modifier and tested following national standards. Physical and mechanical tests revealed that Mix-2 and Mix-3 surpassed the reference in several parameters. Mix-3 showed the highest compressive strength (up to 10.7 MPa) and superior water resistance (0.95), while Mix-2 exhibited the best rutting resistance and crack resistance (4.8 MPa). All mixtures met the minimum requirements for internal friction and adhesion. Results confirm that properly processed ash-based powders can replace traditional mineral fillers without compromising performance. The findings support the integration of technogenic waste into road construction for improved sustainability, reduced material costs, and enhanced durability under extreme temperatures.
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.

