Evaluation of an acoustic Doppler technique for bed-load transport measurements in sand-bed Rivers

S. Conevski; A. Winterscheid; N. Ruther; M. Guerrero; C. Rennie

doi:10.1051/e3sconf/20184002053

All issues

Volume 40 (2018)

E3S Web Conf., 40 (2018) 02053

References

Open Access

Issue		E3S Web Conf. Volume 40, 2018 River Flow 2018 - Ninth International Conference on Fluvial Hydraulics


Article Number		02053
Number of page(s)		8
Section		River morphodynamics and restoration
DOI		https://doi.org/10.1051/e3sconf/20184002053
Published online		05 September 2018

C. Rennie, R. G. Millar and M. A.,. Church, “Measurement of bed load velocity using an acoustic Doppler current profile,” Journal of Hydraulic Engineering, vol. 128(5), p. 473-483, 2002. [CrossRef] [Google Scholar]
C. Rennie and P. V. Villard, “Site specificity of bed load measurement using an acoustic Doppler current profiler,” J. Geophys. Res., vol. 109, no. F03003, 2004. [CrossRef] [Google Scholar]
D. Gaeuman and R. B. Jacobson, “Acoustic bed velocity and bed load dynamics in a large sand bed river,” J Geophys Res Earth Surf, vol. 111(F2), no. F02005, 2006. [CrossRef] [Google Scholar]
F. G. Latosinski, R. N. zupiany, M. Guerrero, M. L. Amsler and C. Vionnet, “The ADCP's bottom track capability for bedload prediction: Evidence on method reliability from sandy river applications,” Flow Measurement and Instrumentation, vol. 54, no. June 2016, pp. 124-135, 2017. [CrossRef] [Google Scholar]
C. Rennie, D. Vericat, R. Williams, J. Brasington and M. Hicks, Calibration of aDcp apparent bedloadvelocity to bedload transport rate, Tsutsumi, D., and Laronne, J., Wiley., 2017 [Google Scholar]
S. Conevski, M. Guerrero, N. Ruther and C. Rennie, “ADCP performance of measuring the bedload velocityunder changing conditions of particles mobility/bedload transport conditions,” in submition, 2018. [Google Scholar]
R. I. R. Lee Gordon, “Acoustic Doppler Current Profiler Principles of Operation A Practical Primer,” RD Instruments, San Diego, California, 1996. [Google Scholar]
G. Hillebrand and R. Frings, “Von der Quelle zur Mündung: Die Sedimentbilanz des Rheins im Zeitraum 1991 - 2010.,” Internationale Kommission für die Hydrologie des Rheingebietes, Lelystad, Achen, 2017. [Google Scholar]
R. M. Frings and V. Stefan, “Guidelines for sampling bedload transport with minimum uncertainty,”Sedimentology, 2017. [Google Scholar]
D. McLean, M. Church and B. and Tassone, “Sediment transport along the lower Fraser River. 1.Measurements and hydraulic computations,” Water Resour. Res, vol. 35, pp. 2533-2548, 1999. [CrossRef] [Google Scholar]
L. Van Rijn, “Sediment transport, part i: bed load transport,” J. Hydraul. Eng., vol. 110, p. 1431-1456, 1984. [CrossRef] [Google Scholar]
D. McLean, M. Church and B. Tassone, “Sediment transport along the lower Fraser River. 1. Measurements and hydraulic computations,” Water Resour. Res., no. 35, pp. 2533-2548, 1999. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] C. Rennie, R. G. Millar and M. A.,. Church, “Measurement of bed load velocity using an acoustic Doppler current profile,” Journal of Hydraulic Engineering, vol. 128(5), p. 473-483, 2002. [CrossRef] [Google Scholar]

[2] C. Rennie and P. V. Villard, “Site specificity of bed load measurement using an acoustic Doppler current profiler,” J. Geophys. Res., vol. 109, no. F03003, 2004. [CrossRef] [Google Scholar]

[3] D. Gaeuman and R. B. Jacobson, “Acoustic bed velocity and bed load dynamics in a large sand bed river,” J Geophys Res Earth Surf, vol. 111(F2), no. F02005, 2006. [CrossRef] [Google Scholar]

[4] F. G. Latosinski, R. N. zupiany, M. Guerrero, M. L. Amsler and C. Vionnet, “The ADCP's bottom track capability for bedload prediction: Evidence on method reliability from sandy river applications,” Flow Measurement and Instrumentation, vol. 54, no. June 2016, pp. 124-135, 2017. [CrossRef] [Google Scholar]

[5] C. Rennie, D. Vericat, R. Williams, J. Brasington and M. Hicks, Calibration of aDcp apparent bedloadvelocity to bedload transport rate, Tsutsumi, D., and Laronne, J., Wiley., 2017 [Google Scholar]

[6] S. Conevski, M. Guerrero, N. Ruther and C. Rennie, “ADCP performance of measuring the bedload velocityunder changing conditions of particles mobility/bedload transport conditions,” in submition, 2018. [Google Scholar]

[7] R. I. R. Lee Gordon, “Acoustic Doppler Current Profiler Principles of Operation A Practical Primer,” RD Instruments, San Diego, California, 1996. [Google Scholar]

[8] G. Hillebrand and R. Frings, “Von der Quelle zur Mündung: Die Sedimentbilanz des Rheins im Zeitraum 1991 - 2010.,” Internationale Kommission für die Hydrologie des Rheingebietes, Lelystad, Achen, 2017. [Google Scholar]

[9] R. M. Frings and V. Stefan, “Guidelines for sampling bedload transport with minimum uncertainty,”Sedimentology, 2017. [Google Scholar]

[10] D. McLean, M. Church and B. and Tassone, “Sediment transport along the lower Fraser River. 1.Measurements and hydraulic computations,” Water Resour. Res, vol. 35, pp. 2533-2548, 1999. [CrossRef] [Google Scholar]

[11] L. Van Rijn, “Sediment transport, part i: bed load transport,” J. Hydraul. Eng., vol. 110, p. 1431-1456, 1984. [CrossRef] [Google Scholar]

[12] D. McLean, M. Church and B. Tassone, “Sediment transport along the lower Fraser River. 1. Measurements and hydraulic computations,” Water Resour. Res., no. 35, pp. 2533-2548, 1999. [CrossRef] [Google Scholar]