Open Access

This article has an erratum: [erratum]

Issue
E3S Web Conf.
Volume 56, 2018
VII International Scientific Conference “Problems of Complex Development of Georesources” (PCDG 2018)
Article Number 03001
Number of page(s) 7
Section Problems of Complex Processing of Mineral Raw Materials and New Technologies of Mineral Processing
DOI https://doi.org/10.1051/e3sconf/20185603001
Published online 26 September 2018
  1. Norgate, T., Haque, N. Energy and greenhouse gas impacts of mining and mineral processing operations. Journal of Cleaner Production, 18, pp. 266-274. (2010) [CrossRef] [Google Scholar]
  2. Norgate, T., Jahanshahi, S. Reducing the greenhouse gas footprint of primary metal production: Where should the focus be? Minerals Engineering, 24, pp. 1563-1570. (2011) [CrossRef] [Google Scholar]
  3. Pevnivtsev, et al.: Selektivnoye razrusheniye mineralov. Moskva: Nedra, (1988) [Google Scholar]
  4. Hesse, M.: Selektive Zerkleinerung von Erzen und Industriemineralen bei Prallbeanspruchung. Dissertation, Technische Universität Bergakademie Freiberg, 2017. [Google Scholar]
  5. Hesse, M.; Lieberwirth, H.: Selective comminution for pre-concentration in mineral processing of lead-zinc-ores. ISBN 978-3-940276-64-3. [Google Scholar]
  6. Hesse, M.; Lieberwirth, H.: Selective comminution to increase efficiency in the beneficiation of mineral recourses. ISBN 978-5-94211-724-5. [Google Scholar]
  7. Ohser, J., et al.: Quantitative Gefügeanalyse Theoretische Grundlagen und Anwendung. Freiberger Forschungshefte. doi: 10.1002/maco.19950460411. [Google Scholar]
  8. Popov, O.: Beitrag zur mathematisch-petrographischen Gefügecharakterisierung für die Beurteilung der Festgesteine hinsichtlich ihrer Aufbereitung und ihrer Produkteigenschaften. Dissertation. Technischen Universität Bergakademie Freiberg, (2007). [Google Scholar]
  9. Puffe, E., 1955. Erfahrungen bei der Prallzerkleinerung in Bergbau-, Aufbereitungs- und Hüttenbetrieben. ERZMETALL, VIII, pp. 570-580. [Google Scholar]
  10. Taggart, F., 1956. Handbook of mineral dressing - ores and minerals. John Wiley & Sons, Inc [Google Scholar]
  11. Talovina I.V. Geochemistry of the Ural oxide-silicate nickel deposits. / St. Petersburg Mining University. 270 p. (2012) [Google Scholar]
  12. Gayfutdinova (Duryagina) A.M. Osobennosti geologicheskogo stroyeniya platinonosnykh kor vyvetrivaniya Svetloborskogo i Nizhnetagil'skogo massivov, Sredniy Ural. // Problemy osvoyeniya nedr v XXI veke glazami molodykh: materialy mezhdunarodnoy molodezhnoy nauchnoy shkoly. 2. P. 37-39. (2012) [Google Scholar]
  13. Vaysberg L.A., Kameneva Ye.Ye. Izmeneniye struktury gornykh porod pri tsiklichnom zamorazhivanii i ottaivanii // Obogashcheniye rud. 2. p. 28-31. (2015) [CrossRef] [Google Scholar]
  14. Talovina, I.V., Aleksandrova, T.N., Popov, O., Lieberwirth, H. Comparative analysis of rocks structural-textural characteristics studies by computer X-ray microtomography and quantitative microstructural analysis methods. Obogashchenie Rud. 3, P. 56-62. (2017) 10.17580/or.2017.03.09 [CrossRef] [Google Scholar]
  15. Talovina, I.V., Lieberwirth, H., Alexandrova, T.N., Heide, G. Supergene oxide-silicate nickel deposits: Mineral-geochemical composition and peculiarities of processing. Eurasian Mining. 2017 (1). P. 21-24. (2017) 10.17580/em.2017.01.06. [CrossRef] [Google Scholar]
  16. ISRM - International Society for Rock Mechanics (1985): Suggested method for determining point load strength. Commission on Testing Method. Working Group on Revision of the Point Load Test Method. Int. J. Rock Mech. // Min. Sci. & Geomech. Abstr.. 22 (2). P. 51-60. (1985) [CrossRef] [Google Scholar]
  17. Raaz, V. Charakterisierung der Gesteinsfestigkeit mit Hilfe eines modifizierten Punktlastversuches. In: Z. Geol. Wiss. 30. 3. S. 213-226. (2002) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.