Open Access
Issue
E3S Web Conf.
Volume 60, 2018
Ukrainian School of Mining Engineering
Article Number 00012
Number of page(s) 10
DOI https://doi.org/10.1051/e3sconf/20186000012
Published online 16 October 2018
  1. Kolesnik, V.Ye, Pavlichenko, A.V., & Buchavy, Yu.V. (2016). Determination of dynamic parameters of dust emission from a coal mine fang. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (2), 81–87. [Google Scholar]
  2. Buzylo, V., Yavorsk’yy, A., & Yavorsk’yy, V. (2012). Analysis of stress-strain state of rock mass while mining chain pillars by chambers. Geomechanical Processes During Underground Mining, 95–98. https://doi.org/10.1201/b13157-16 [CrossRef] [Google Scholar]
  3. Buzilo, V., Serdyuk, V., & Yavorsky, A. (2010). Research of influence of support resistance of the stope in the immediate roof condition. New Techniques and Technologies in Mining, 127–130. https://doi.org/10.1201/b11329-21 [CrossRef] [Google Scholar]
  4. Pivnyak, G.G., & Shashenko, O.M. (2015). Innovations and safety for coal mines in Ukraine. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (6), 118–121. [Google Scholar]
  5. Golinko, V.I., Yavorskiy, A.V., Lebedev, Ya.Ya., & Yavorskaya, Ye.A. (2014). Estimation of frictional sparking effect on firedamp inflammation during fragmentation of gas-saturated rock massif. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (6), 31–37. [Google Scholar]
  6. Dryzhenko, A., Shustov, A., & Moldabayev, S. (2017). Justification of parameters of building inclined trenches using belt conveyors. 17th International Multidisciplinary Scientific GeoConference SGEM 2017, 471–478. DOI:10.5593/sgem2017/13/S03.060 [Google Scholar]
  7. Falshtynskyi, V.S., Dychkovskyi, R.O., Saik, P.B., Lozynskyi, V.G., & E. Cáceres Cabana. (2017). Formation of thermal fields by the energy-chemical complex of coal gasification. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (5), 36–42. [Google Scholar]
  8. Lozynskyi, V., Dychkovskyi, R., Saik, P., Falshtynskyi, V. (2018). Coal Seam Gasification in Faulting Zones (Heat and Mass Balance Study). Solid State Phenomena, (277), 66–79. https://doi.org/10.4028/www.scientific.net/SSP.277.66 [CrossRef] [Google Scholar]
  9. Bondarenko, V., Tabachenko, M., & Wachowicz, J. (2010). Possibility of production complex of sufficient gasses in Ukraine. New Techniques and Technologies in Mining, 113–119. [CrossRef] [Google Scholar]
  10. Golinko, V.I., Cheberiachko, S.I., Yavors’ka, O.O., & Tykhonenko, V.V. (2017). Assessment of protection level of dust respirators at coal mines. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (3), 102–107. [Google Scholar]
  11. Cheberiachko, S.I., Yavorska, O.O., & Morozova, T.I. (2013). Study of mechanical half-mask pressure along obturation bar. Technical and Geoinformational Systems in Mining, 317–323. [Google Scholar]
  12. Newnum, J.D. (2010) The effect sofrelative humidity on respirator performance. Master’s thesis, University of Iowa, http://ir.uiowa.edu/etd/861 [Google Scholar]
  13. Holinko, V., Cheberiachko, S., Yavorska, O., & Radchuk, D. (2016). Issledovanie zashchitnykh svoystv respiratorov-polumasok, ispol’zuemykh shakhterami. Min. Miner. Depos., 10(4), 29–36. [CrossRef] [Google Scholar]
  14. Fabbro, L.D., Brun, P., Laborde, J.C., Lacan, J., Renoux, A., & Ricciardi L. (2012). Contribution to the modelling of industrial pleated filters by solid particles. American Journal of Environmental Science, 8(4), 385–395. [CrossRef] [Google Scholar]
  15. Tikhonov, M.M., Parmon, V.V., Boinichev, O.N., & Ryabtsev, V.N. (2015). Assessment of protective efficiency of respiratory protection devices to provide safe operation in the zone of radioactive contamination. Vestnik Komandno-inzhenernogo instituta MChS Respubliki Belarus’, 1(21), 58–67. [Google Scholar]
  16. Haruta, H., Honda, T., & Eninger, R.M. (2009). Experimental and theoretical investigation of the performance of N95 respirator filters against ultrafine aerosol particles tested at constant and cyclic flows. Journal Int. Soc. Respir. Prot., (25), 75–88. [Google Scholar]
  17. Feng, Z., Long, Z., & Chen, Q. (2014). Assessment of Various CFD Models for Predicting Airflow and Pressure Drop Through Pleated Filter System. Build. Environ., (75), 132–141. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.