Open Access
Issue
E3S Web Conf.
Volume 60, 2018
Ukrainian School of Mining Engineering
Article Number 00039
Number of page(s) 13
DOI https://doi.org/10.1051/e3sconf/20186000039
Published online 16 October 2018
  1. Barecki, Z., & Scieszka, S.F. (1987). A Mathematical Model of the Brake Shoe and the Brake Path System. N&O JOERNAAL, 13–17. http://dx.doi.org/10.1115/1.3258977 [Google Scholar]
  2. Bondarenko, V.I., Samusya, V.I., & Smolanov, S.N. (2005). Mobile lifting units for wrecking works in pit shafts. Gornyi Zhurnal, 99–100. [Google Scholar]
  3. Davydov, B.L. (1949). Raschet i konstruirovanie shakhtnykh pod’yemnykh mashin. Moskva: Ugletekhizdat. [Google Scholar]
  4. Day, A.J. (1991). Drum brake interface pressure distributions. Proc Instn Mech Engrs, 127–135. http://dx.doi.org/10.1243/PIME_PROC_1991_205_161_02 [CrossRef] [Google Scholar]
  5. Day, A.J., Harding, P.J., & Newcomb, T.P. (1979). A finite element approach to drum brake analysis. Proceedings of the Institution of Mechanical Engineers, (193), 400–406. http://dx.doi.org/10.1243/PIME_PROC_1979_193_043_02 [Google Scholar]
  6. Day, A.J., Tirovic, M., & Newcomb, T.P. (1991). Thermal effects and pressure distributions in brakes. Proceedings of the Institution of Mechanical Engineers, (205), 199–205. http://dx.doi.org/10.1243/PIME_PROC_1991_205_171_02 [CrossRef] [Google Scholar]
  7. Fedorova, Z.M. (1961). Sbornik primerov i zadach po rudnichnym pod’yemnym ustanovkam. Moskva: Gosudarstvennoe nauchno-tekhnicheskoe izdatel’stvo literatury po gornomu delu. [Google Scholar]
  8. Huang, Y.M., & Shyr, J.S. (2002). On Pressure Distributions of Drum Brakes. Journal of Mechanical Design, (124), 115–120. http://dx.doi.org/10.1115/1.1427694 [CrossRef] [Google Scholar]
  9. Ilin, S.R., Samusia, V.I., Ilina, I.S., & Ilina, S.S. (2016). Influence of dynamic processes in mine hoists on safety exploitation of shafts with broken geometry. Naukovyi Visnyk Natsіonalnoho Hіrnychoho Unіversitetu, (3), 42–47. [Google Scholar]
  10. Karpyshev, N.S. (1968). Tormoznye ustroystva shakhtnykh pod’yemnykh mashin. Moskva: Nedra. [Google Scholar]
  11. Kolosov, D., Dolgov, O., & Kolosov, A. (2013). The stress-strain state of the belt on a drum under compression by flat plates. Annual Scientific-Technical Collection – Mining of Mineral Deposits, 351–357. http://dx.doi.org/10.1201/b16354-65 [CrossRef] [Google Scholar]
  12. Kyrychenko, Y.O., Samusia, V.I., & Kyrychenko, V.Y. (2012). Software development for the automatic control system of deep water hydrohoist. Geomechanical Processes During Underground Mining: School of Underground Mining 2012, 81–86. http://dx.doi.org/10.1201/b13157-14 [CrossRef] [Google Scholar]
  13. Kyrychenko, Y.O., Samusia, V.I., Kyrychenko, V.Y., & Goman, O. (2012). Experimental investigation of aeroelastic and hydroelastic instability parameters of a marine pipeline. Geomechanical Processes During Underground Mining: School of Underground Mining 2012, 163–167. https://doi.org/10.1201/b13157-28 [CrossRef] [Google Scholar]
  14. Kyrychenko, Y.O., Samusya, V.I., Kyrychenko, V.Y., & Romanyukov, A.V. (2013). Experimental investigation of aero-hydroelastic instability parameters of the deepwater hydrohoist pipeline. Middle East Journal of Scientific Research, 530–534. http://dx.doi.org/10.5829/idosi.mejsr.2013.18.4.12426 [Google Scholar]
  15. Moskalyova, T.V., & Polushyna, M.V. (2015). Cross way of fastening steel ropes to a single-drum mine hoisting plant with the location of pulleys on the same axis. Naukovyi Visnyk Natsіonalnoho Hіrnychoho Unіversitetu, 56–62. [Google Scholar]
  16. Samusia, V.I., Oksen, Y.I., & Radiuk, M.V. (2013). Heat pumps for mine water waste heat recovery. Annual Scientific-Technical Collection – Mining of Mineral Deposits, 153–157. http://dx.doi.org/10.1201/b16354-27 [CrossRef] [Google Scholar]
  17. Zabolotny, K., & Panchenko, E. (2010). Definition of rating loading in spires of multilayer winding of rubberrope cable. New Techniques and Technologies in Mining, 223–229. https://doi.org/10.1201/b11329-38 [CrossRef] [Google Scholar]
  18. Zabolotny, K., Zhupiev, O., & Molodchenko, A. (2015). Analysis of current trends development of mining hoist design engineering. Theoretical and Practical Solutions of Mineral Resources Mining, 175–178. https://doi.org/10.1201/b19901-32 [Google Scholar]
  19. Zabolotnyi, K., Zhupiiev, O., & Molodchenko, A. (2017). Development of a model of contact shoe brake-drum interaction in the context of a mine hoisting machine. Mining of Mineral Deposits, 11(4), 38–45. https://doi.org/10.15407/mining11.04.038 [CrossRef] [Google Scholar]
  20. Zabolotnyi, K., Zhupiiev, O., & Molodchenko, A. (2018). The effect of stiffness of shoe brake elements on the distribution of contact pressures. Naukovyi Visnyk Natsіonalnoho Hіrnychoho Unіversitetu, 2(164), 39–46. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.