EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 87 (2019) E3S Web Conf., 87 (2019) 01022 References
Open Access
Issue
E3S Web Conf.
Volume 87, 2019
1st International Conference on Sustainable Energy and Future Electric Transportation (SeFet 2019)
Article Number 01022
Number of page(s) 7
DOI https://doi.org/10.1051/e3sconf/20198701022
Published online 22 February 2019
  1. Frede Blaabjerg, Dan M. Ionel, Renewable Energy Devices and Systems with Simulations in MATLAB® and ANSYS®, CRC Press, 2017. [CrossRef] [Google Scholar]
  2. Meherdad Eshani, Yimin gao and Ali Emadi, Modern-Electric, Hybrid-Electric and-Fuel-Cell-Vehicles: Fundamentals, theory and design, CRC Press, 2009 [Google Scholar]
  3. A. Emadi, Y.-J. Lee, and K. Rajashekara, “Power electronics and motor drives in electric, hybrid electric, and plug-in hybrid electric vehicles”, IEEE Transactions on Industrial Electronics, vol. 55, no. 6, pp. 2237-2245, June 2008. [CrossRef] [Google Scholar]
  4. X. Nian, F. Peng and H. Zhang, “Regenerative Braking System of Electric Vehicle Driven by Brushless DC Motor,” in IEEE Transactions on Industrial Electronics, vol. 61, no. 10, pp. 5798-5808, Oct. 2014 [CrossRef] [Google Scholar]
  5. M. Krishnamurthy, C. S. Edrington, A. Emadi, P. Asadi, M. Ehsani, and B. Fahimi, “Making the case for applications of switched reluctance motor technology in automotive products,” IEEE Transactions on Power Electronics, vol. 21, no. 3, pp. 659-675, May 2006. [CrossRef] [Google Scholar]
  6. J. Cao and B. Cao, “Fuzzy-logic - Based Sliding Mode Controller Design for Position -Sensorless Electric vehicle,” IEEE Trans.Power Electron. vol. 24, no. 10, pp. 2368— 2378, October 2009 [CrossRef] [Google Scholar]
  7. J. Cao, B. Cao, Z. Bai, P. Xu and X. Wu, ”Neural network control of Electric Vehicle based on Position –Sensor less Brushless DC Motor,” Proceedings of the IEEE Int. Conf. on Automation And logistics, pp. 2029–2034, August 2007. [Google Scholar]
  8. Z.Q. Zhu, David Howe, “Electric machines and drives for electric hybrid and fuel cell vehicles,” Proceedings of IEEE, vol. 95, no. 4, pp. 746-765, Apr 2007. [CrossRef] [Google Scholar]
  9. R. Kumar and B. Singh, “Buck-boost converter fed BLDC motor drive for solar PV array based water pumping,” 2014 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Mumbai, 2014, pp. 1-6. [Google Scholar]
  10. B. Singh V. Bist “A BL-CSC Converter Fed BLDC Motor Drive with Power Factor Correction” IEEE Transactions on Industrial Electronics no. 99 2014. [Google Scholar]
  11. R. Kumar and B. Singh, “Buck-boost converter fed BLDC motor drive for solar PV array based water pumping” 2014 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Mumbai, 2014, pp. 1-6. [Google Scholar]
  12. B. Singh V. Bist “A BL-CSC Converter Fed BLDC Motor Drive with Power Factor Correction” IEEE Transactions on Industrial Electronics no. 99 2014. [Google Scholar]
  13. J.F. Gieras and Wing, Permenent Magnet Motor Technology, Marcel Dekker Inc, New York, 1997 [Google Scholar]
  14. R. Qu, M. Aydin, T.A. Lipo, “Performance comparison of dualrotor radial-flux and axial-flux permanent-magnet BLDC machines”, in proc. IEEE Int. Elect. Mach. Drives Conf, pp. 1948-1954, 2003. [Google Scholar]
  15. K. Sitapati, R. Krishnan, “Performance comparisons of radial and axial field permanent magnet brushless machines”, IEEE Trans. Ind. Appl, vol. 37, no. 5, pp. 1219-1226, 2001. [CrossRef] [Google Scholar]
  16. N.B. Simisie, H.B. Ertan, “A comparison of torque capabilities of axial flux and radial flux type of brushless dc (BLDC) drives for wide speed range applications”, in proc. IEEE PEDS Honk Kong, pp. 719-724, 1999. [Google Scholar]
  17. R Qu, T A Lipo, “Dual-rotor radial-flux torodially wound permanent-magnet machines”, IEEE Trans. Industry Applications, vol. 39, no. 6, pp. 1665-1673, 2003. [CrossRef] [Google Scholar]
  18. R. Qu, T.A. Lipo, “Design and parameter effect analysis of dual-rotor radial flux toroidally wound permanent magnet machines”, IEEE Trans. Industry Applications, vol. 40, no. 3, pp. 771-779, 2004. [CrossRef] [Google Scholar]
  19. Duane C. Hanselman, Brushless Permanent-Magnet Motor Design, New York: McGraw-Hill Inc., 1994. [Google Scholar]
  20. T. J. E. Miller, Brushless Permanent-Magnet and Reluctance Motor Drives, Clarendon Press, Oxford, 1989. [Google Scholar]
  21. J. R. Hendershot Jr. and T. J. E Miller, Design of Permanent Magnet Motors, Oxford, U.K: Oxford Univ. Press, 1994 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.