Open Access
E3S Web Conf.
Volume 92, 2019
7th International Symposium on Deformation Characteristics of Geomaterials (IS-Glasgow 2019)
Article Number 03006
Number of page(s) 6
Section Geomaterial Behaviour: Fabric and Fabric Evolution
Published online 25 June 2019
  1. J.M. Southen, R.K. Rowe. Laboratory investigation of geosynthetic clay liner desiccation in a composite liner subjected to thermal gradients. J Geotech Geoenv Eng 131 (7), 925-935 (2005). [CrossRef] [Google Scholar]
  2. J.M. Southen, R.K. Rowe. Modelling of thermally induced desiccation of geosynthetic clay liners. Geotext Geom 23 (5), 425-442 (2005). [CrossRef] [Google Scholar]
  3. F.M. Azad, R.K. Rowe, A. El-Zein, D.W. Airey. Laboratory investigation of thermally induced desiccation of GCLs in double composite liner systems. Geotext Geom 29 (6), 534-543 (2011). [CrossRef] [Google Scholar]
  4. F.M. Azad, A. El-Zein, R.K. Rowe, D.W. Airey. Modelling of thermally induced desiccation of geosynthetic clay liners in double composite liner systems. Geotext Geom, 34:28-38 (2012). [CrossRef] [Google Scholar]
  5. R.K. Rowe, A. Verge A. Prediction of geosynthetic clay liner desiccation in low stress applications. Geosynth Intern 20 (5): 301-315 (2013). [CrossRef] [Google Scholar]
  6. J. Ghorbani, A. El-Zein, DW Airey. Thermo-elasto-plastic analysis of geosynthetics clay liners under thermal dehydration. Env Geot, in press (2019). [Google Scholar]
  7. A. Bouazza, R.M. Singh, R.K. Rowe, F. Gassner. Heat and moisture migration in a geomembrane-GCL composite liner subjected to high temperatures and low vertical stresses. Geotext Geom 42 (5), 555-563 (2014). [CrossRef] [Google Scholar]
  8. A. Bouazza, M.A. Ali, W.P. Gates, R.K. Rowe, A. El-Zein. 2017. Heat mitigation in geosynthetics composite liners exposed to elevated temperatures. Geotext Geom, 45 (5):406-417 (2017). [CrossRef] [Google Scholar]
  9. A. Ghavam-Nasiri, A. El-Zein, R.K. Rowe, D.W. Airey. 2017. Hydration and desiccation of GCLs in composite lining systems under brine pond conditions: A laboratory investigation. 2nd Int Symp Coupled Phen Env Geot, Leeds, Sep 2017. [Google Scholar]
  10. B. Yu, A. El-Zein, R.K. Rowe. 2018. Effect of bentonite mass per unit area on the desiccation of geosynthetic clay liners under high temperature and low overburden pressure. 11th Intern Conf on Geosynth, Seoul, 16-21 September 2018. [Google Scholar]
  11. B. Chevrier, D. Cazaux, G. Didier, et al. Influence of subgrade, temperature and confining pressure on GCL hydration. Geotext Geomem, 33: 1-6 (2012). [CrossRef] [Google Scholar]
  12. G. Siemens, W.A. Take, R.K. Rowe et al. numerical investigation of transient hydration of unsaturated geosynthetic clay liners. Geosynth Intern 19(3), 232-251 (2012). [CrossRef] [Google Scholar]
  13. R.J. Petrov, R.K. Rowe, R.M. Quigley. Selected factors influencing GCL hydraulic conductivity. J Geotch Geoenv Eng 123(8):683-695 (1997). [CrossRef] [Google Scholar]
  14. D. Guyonnet, E. Gaucher, H. Gaboriau, et al. GCLs interaction with leachate: correlation between permeability, microstructure and surface chemistry. J Geot Geoen Eng 131(6), 740-749 (2005). [CrossRef] [Google Scholar]
  15. T. Katsumi. Fukagawa, R. 2005. Factors affecting the chemical compatibility and the barrier performance of GCLs. In Proc 16th Intern Conf Soil Mech Geotecl Eng (pp. 2285-2288). [Google Scholar]
  16. C. Benson, S. Meer. Relative abundance of monovalent and divalent cations and the impact of desiccation on geosynthetic clay liners. J Geotech Geoenv Eng 135(3):349-358 (2009). [CrossRef] [Google Scholar]
  17. R.K. Rowe, M.T. Rayhani, W.A. Take et al. GCL hydration under simulated daily thermal cycles. Geosynth Intern 18(4), 196-205 (2011). [CrossRef] [Google Scholar]
  18. A. Barclay, M.T. Rayhani. Effect of temperature on hydration of geosynthetic clay liners in landfills. Waste Manag & Res, 31(3), 265-272 (2013). [CrossRef] [Google Scholar]
  19. M.T. Rayhani, R.K. Rowe, R.W.I. Brachman et al. Factors affecting GCL hydration under isothermal conditions. Geotext Geom, 29(6), 525-533 (2011). [CrossRef] [Google Scholar]
  20. G. Siemens, W.A. Take, R.K. Rowe et al. 2013. Effect of confining stress on the transient hydration of unsaturated GCLs. In Proc 18th Int Conf Soil Mech Geotec Eng (pp. 1187-1190). [Google Scholar]
  21. P. Delage, Y.J. Cui, A.M. Tang. Clays in radioactive waste disposal. J Rock Mechanics Geotech Eng, 2(2), 111-123 (2010). [CrossRef] [Google Scholar]
  22. A. Zaoui, W. Sekkal. Can clays ensure nuclear waste repositories? Scientific Rep 5, 8815 (2015). [CrossRef] [Google Scholar]
  23. C.L. Zhang, N. Conil, G. Armand. Thermal effects on clay rocks for deep disposal of high-level radioactive waste. J Rock Mechanics Geotech Eng 9(3), 463-478 (2017). [CrossRef] [Google Scholar]
  24. A. Bouazza. (2002). Geosynthetic Clay Liners (GCLs). In 4th Int Pipel Conf, ASME, A, 211-216. [Google Scholar]
  25. Geosynthetic Research Institute. (2016). Test Methods, Required Properties and Testing Frequencies of GCLs. [Google Scholar]
  26. Grandview Research. 2016. Geosynthetic clay liners market analysis by application. 83 pages. [Google Scholar]
  27. A. Bouazza, J. Zornberg, J.S. McCartney et al. Unsaturated geotechnics applied to geoenvironmental engineering problems involving geosynthetics. Eng Geol, 165, 143-153 (2013). [CrossRef] [Google Scholar]
  28. B. Yu, A. El-Zein. Effect of air gaps on dehydration, desiccation and healing of bentonite in geosynthetic clay liners exposed to high temperatures. Geotext Geom (in press). [Google Scholar]
  29. S. Olivella, A. Gens, J. Carrera et al. Numerical formulation for a simulator (CODE_BRIGHT) for coupled analysis of saline media. Eng Comput, 13(7), 87-112 (1996). [CrossRef] [Google Scholar]
  30. A. Ghavam-Nasiri, A. El-Zein, R.K. Rowe, D. Airey, M. Bouazza. Thermo-hydro-mechanical simulation of geosynthetics clay liner subject to high temperatures and low overburden pressure. Int J Geom (in press). [Google Scholar]
  31. A. Bouazza, M.A. Ali, P. Gates, R.K. Rowe. New insight on geosynthetic clay liner hydration : the key role of subsoils mineralogy. Geosynth Intern 24(2), 139-150 (2016). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.