Open Access
Issue
E3S Web Conf.
Volume 92, 2019
7th International Symposium on Deformation Characteristics of Geomaterials (IS-Glasgow 2019)
Article Number 14009
Number of page(s) 6
Section Discrete Element Modelling
DOI https://doi.org/10.1051/e3sconf/20199214009
Published online 25 June 2019
  1. J. P. Bardet, Numerical simulations of the incremental responses of idealized granular materials, Int. J. Plast., 10, 8 (1994). [CrossRef] [Google Scholar]
  2. F. Calvetti and F. Emeriault, Interparticle forces distribution in granular materials: link with the macroscopic behaviour, Mech. Cohesive-frictional Mater., 4, 3 (1999). [CrossRef] [Google Scholar]
  3. C. Thornton and L. Zhang, On the evolution of stress and microstructure during general 3D deviatoric straining of granular media, Géotechnique, 60, 5 (2010). [Google Scholar]
  4. C. Tamagnini, F. Calvetti, and G. Viggiani, An assessment of plasticity theories for modeling the incrementally nonlinear behavior of granular soils, J. Eng. Math., 52, 1 (2005). [Google Scholar]
  5. M. O. Ciantia, M. Arroyo, F. Calvetti, and A. Gens, A numerical investigation of the incremental behavior of crushable granular soils, Int. J. Numer. Anal. Methods Geomech., 40, 13 (2016). [Google Scholar]
  6. M. O. Ciantia, M. Arroyo, C. O’Sullivan, and A. Gens, Micromechanical Inspection of Incremental Behaviour of Crushable Soils, Acta Geotech. [Google Scholar]
  7. H. C. Nguyen, C. O’Sullivan, and M. Otsubo, Discrete element method analysis of small-strain stiffness under anisotropic stress states, Géotechnique Lett., 8, 3 (2018). [Google Scholar]
  8. M. O. Ciantia, M. Arroyo, F. Calvetti, and A. Gens, An approach to enhance efficiency of DEM modelling of soils with crushable grains, Géotechnique, 65, 2 (2015). [Google Scholar]
  9. M. O. Ciantia, M. Arroyo, J. Butlanska, and A. Gens, DEM modelling of cone penetration tests in a double-porosity crushable granular material, Comput. Geotech., 73 (2016). [Google Scholar]
  10. M. Ciantia, M. Arroyo, C. O’Sullivan, A. Gens, and T. Liu, Grading evolution and critical state in a discrete numerical model of Fontainebleau sand, Géotechnique, (2018). [Google Scholar]
  11. A. R. Russell and D. Muir Wood, Point load tests and strength measurements for brittle spheres, Int. J. Rock Mech. Min. Sci., 46, 2 (2009). [CrossRef] [Google Scholar]
  12. C. G. I. Itasca, PFC-Particle Flow Code, Ver. 5.0. Minneapolis, (2017). [Google Scholar]
  13. Y. P. Cheng, M. D. Bolton, and Y. Nakata, Crushing and plastic deformation of soils simulated using DEM, Géotechnique, 54, 2 (2004). [Google Scholar]
  14. M. Arroyo and D. Muir-Wood, Simplifications related to dynamic measurements of anisotropic G0, in Proc. Int. Symp. Deformation Characteristics of Geomaterials, ISLyon03 (2003). [Google Scholar]
  15. J. Graham and G. T. Houlsby, Anisotropic elasticity of a natural clay, Géotechnique, 33, 2 (1983). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.