Open Access
Issue
E3S Web Conf.
Volume 92, 2019
7th International Symposium on Deformation Characteristics of Geomaterials (IS-Glasgow 2019)
Article Number 15007
Number of page(s) 5
Section Constitutive Modelling
DOI https://doi.org/10.1051/e3sconf/20199215007
Published online 25 June 2019
  1. J. B. Burland and J. E. B. Jennings, Géotechnique, 12, 2, 125-144, (1962). [CrossRef] [Google Scholar]
  2. D. G. Fredlund et al., Can. Geotech. Rev. Can., 321, 313-321, (1978). [CrossRef] [Google Scholar]
  3. S. Vanapalli et al., Proc. 51st Can. Geotech. Conf., 87-94, (1998). [Google Scholar]
  4. Y. Matsushi and Y. Matsukura, Bull. Eng. Geol. Environ., 65, 4, 449-455, (2006). [CrossRef] [Google Scholar]
  5. D. Croney et al., (1958). [Google Scholar]
  6. A. Bishop, Tek. Ukebl., 39, 859-863, (1959). [Google Scholar]
  7. A. W. Bishop and G. E. Blight, Géotechnique, 13, 3, 177-197, (1963). [CrossRef] [Google Scholar]
  8. D. G. Fredlund and N. R. Morgenstern, J. Geotech. Div., 103, GT5, 447-466, (1977). [Google Scholar]
  9. E. C. Leong, Indian Geotech. Conf., 103, 5, 447-466, (2016). [Google Scholar]
  10. N. Lu and W. J. Likos, J. Geotech. Geoenvironmental Eng., 132, 2, 131-142, (2006). [CrossRef] [Google Scholar]
  11. H. Q. Pham and D. G. Fredlund, Can. Geotech. Conf. Saskatoon, Canada, 173-181, (2005). [Google Scholar]
  12. E. E. Alonso et al., Géotechnique, 63, 6, 463-478, (2013). [CrossRef] [Google Scholar]
  13. V. Sivakumar and S. J. Wheeler, Géotechnique, 50, 4, 359-368, (2000). [CrossRef] [Google Scholar]
  14. F. C. Silva et al., Proc. third Int. Conf. unsaturated soil, 133-137, (2002). [Google Scholar]
  15. S. Imhoff et al., Soil Sci. Soc. Am. J., 68, 1, 17, (2004). [Google Scholar]
  16. K. Cui et al., Geoderma, 156, 3-4, 337-345, (2010). [Google Scholar]
  17. A. W. Bishop and I. B. Donald, Proc. 5th Int. Conf. Soil Mech. Found. Eng., 13-21, (1961). [Google Scholar]
  18. B. S. Satija, Indian Institute of Technology, Dheli, (1978). [Google Scholar]
  19. A. M. Rasool et al., 6th Asia Pacific Conf. Unsaturated Soils, 267-273, (2015). [Google Scholar]
  20. S. K. Vanapalli et al., Can. Geotech. J., 33, 3, 2, (1996). [CrossRef] [Google Scholar]
  21. D. W. Rassam and C. Freeman, Geotech. Test. J., 25, 2, 215-220, (2002). [CrossRef] [Google Scholar]
  22. O. M. Vilar, Can. Geotech. J., 43, 10, 1088-1095, (2006). [CrossRef] [Google Scholar]
  23. G. Chen et al., Appl. Mech. Mater., 438-439, 1176-1180, (2013). [CrossRef] [Google Scholar]
  24. A.-L. Oberg and G. Sallfors, Geotech. Test. Journal, GTJODJ, 20, 1, 40-48, (1997). [CrossRef] [Google Scholar]
  25. N. Khalili and M. H. Khabbaz, Géotechnique, 48, 5, 681-687, (1998). [CrossRef] [Google Scholar]
  26. L. Miao et al., Eng. Geol., 65, 4, 261-267, (2002). [Google Scholar]
  27. C. Kayadelen et al., Environ. Geol., 53, 4, 891-901, (2007). [CrossRef] [Google Scholar]
  28. P. Chen et al., J. Appl. Math., 2013, (2013). [PubMed] [Google Scholar]
  29. S. G. Goh et al., J. Geotech. Geoenvironmental Eng., 136, 4, 2, (2010). [CrossRef] [Google Scholar]
  30. ASTM D698-12e2, ASTM Int. West Conshocken, PA, 2010, (2012). [Google Scholar]
  31. ASTM D5298-16, ASTM International, West Conshocken, PA, 2003. (2010). [Google Scholar]
  32. ASTM D3080/D3080M-11, ASTM Int. West Conshocken, PA, 2003, (2003). [Google Scholar]
  33. A. Heitor et al., 18th Int. Conf. Soil Mech. Geotech. Eng., 1007-1011, (2013). [Google Scholar]
  34. S. Kato et al., 5th Int. Conf. Unsaturated Soils, 265-270, (2011). [Google Scholar]
  35. A. Jotisankasa and W. Mairaing, J. Geotech. Geoenvironmental Eng., 136, 3, 533-537, (2010). [CrossRef] [Google Scholar]
  36. J. K. M. Gan et al., Can. Geotech. J., 25, 3, pp.500-510, (1988). [CrossRef] [Google Scholar]
  37. H. Rahardjo et al., Can. Geotech. J., 41, 421-436, (2004). [CrossRef] [Google Scholar]
  38. T. M. Thu et al., J. Geotech. Geoenvironmental Eng., 132, 3, 411-419, (2006). [CrossRef] [Google Scholar]
  39. S. Nam et al., Eng. Geol., 122, 3-4, 272-280, (2011). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.