Open Access
Issue |
E3S Web Conf.
Volume 108, 2019
Energy and Fuels 2018
|
|
---|---|---|
Article Number | 01003 | |
Number of page(s) | 11 | |
Section | Energy | |
DOI | https://doi.org/10.1051/e3sconf/201910801003 | |
Published online | 05 July 2019 |
- European Standard EN 12952-3, Water-tube boilers, and auxiliary installations. Part 3: Design and calculation for pressure parts, European Committee for Standardization. Brussels (2001) [Google Scholar]
- J. Taler, P. Dzierwa, Optimum heating of pressure vessels with holes. ASME J. Pressure Vessel Technology; 137, 011202-1-8 (2014) [Google Scholar]
- J. Taler, P. Dzierwa, A new method for optimum heating of steam boiler pressure components, Int. J. Energ. Res., 35, 897–908 (2011) [CrossRef] [Google Scholar]
- P. Dzierwa, Optimum heating of pressure components of steam boilers with regard to thermal stresses, J. Therm. Stresses, 39, 874–886 (2016) [CrossRef] [Google Scholar]
- P. Dzierwa, M. Trojan, D. Taler, K. Kamińska, and J. Taler, Optimum heating of thickwalled pressure components assuming a quasi-steady state of temperature distribution, J. Therm. Sci., 25, 380–388 (2016) [CrossRef] [Google Scholar]
- M. Jaremkiewicz, D. Taler, T. Sobota, Measurement of transient fluid temperature, Int. J. Therm. Sci., 87, 241–250 (2015) [Google Scholar]
- M. Jaremkiewicz, Accurate measurement of unsteady state fluid temperature, Heat Mass Transfer, 53, 887–897 (2017) [CrossRef] [Google Scholar]
- M. Jaremkiewicz, J. Taler, Measurement of transient fluid temperature in a pipeline, Heat Transfer Eng., 39, issues 13-14, 1227–1234 (2018) [CrossRef] [Google Scholar]
- D. Taler, K. Kaczmarski, Mathematical modelling of the transient response of pipeline, J. Therm. Sci., 25, 549–557 (2016) [CrossRef] [Google Scholar]
- J. Taler, W. Zima, M. Jaremkiewicz, Simple method for monitoring transient thermal stresses in pipeline, J. Therm. Stresses, 39, 386–397 (2016) [CrossRef] [Google Scholar]
- J. Taler, B. Węglowski, and M. Pilarczyk, Monitoring of thermal stresses in pressure components using inverse heat conduction methods, Int. J. Numer. Method. H., 27, 740756 (2017) [Google Scholar]
- J. Taler, P. Dzierwa, D. Taler, M. Jaremkiewicz, M. Trojan, Monitoring of thermal stresses and heating optimization including industrial applications, Nova Science Publishers, New York (2016) [Google Scholar]
- J. Taler, Exact solution of inverse heat conduction problems, Encyclopedia of Thermal Stresses, 3, Springer, 1440–1465 (2014) [CrossRef] [Google Scholar]
- J. Taler, D. Taler, Measurement of heat flux and heat transfer coefficient, Heat flux: processes, measurement techniques, and applications, 1–103, Nova Science Publishers, New York, (2012) [Google Scholar]
- J. Taler, D. Taler, K. Kaczmarski, P. Dzierwa, M. Trojan, T. Sobota, Monitoring of thermal stresses in pressure components based on the wall temperature measurement, Energy, 160 500–519 (2018) [CrossRef] [Google Scholar]
- ASME PTC 19.3 TW-2010, Thermowells. Performance Test Codes, An American National Standard, The American Society of Mechanical Engineers, New York (2010) [Google Scholar]
- A. Cebula, D. Taler, Finite volume method in heat conduction, Encyclopedia of thermal stresses, 4 F-G, Springer, 1645–1658 (2014) [CrossRef] [Google Scholar]
- J. Taler, A semi-numerical method for solving inverse heat conduction problems, Heat Mass Transfer, 31, 105–111 (1996) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.