Open Access
Issue |
E3S Web Conf.
Volume 109, 2019
International Conference Essays of Mining Science and Practice
|
|
---|---|---|
Article Number | 00005 | |
Number of page(s) | 14 | |
DOI | https://doi.org/10.1051/e3sconf/201910900005 | |
Published online | 09 July 2019 |
- Babets, D.V., Sdvyzhkova, O.O., Larionov, M.H., Tereshchuk, R.M. (2017). Estimation of rock mass stability based on probability approach and rating systems. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (2), 58-64 [Google Scholar]
- Khomenko, O., Kononenko, M., Bilegsaikhan, J. (2018). Classification of Theories about Rock Pressure. Solid State Phenomena, (277), 157-167. DOI: 10.4028/www.scientific.net/SSP 277.157 [CrossRef] [Google Scholar]
- Vladyko, O., Kononenko, M., Khomenko, O. (2012). Imitating modeling stability of mine workings. Geomechanical Processes During Underground Mining 2012, 147-150. DOI: 10.1201/b13157-26 [CrossRef] [Google Scholar]
- Pivnyak, G., Samusia, V., Oksen, Y., Radiuk, M. (2014). Parameters optimization of heat pump units in mining enterprises. Progressive Technologies of Coal, Coalbed Methane, and Ores Mining, 19-24 [CrossRef] [Google Scholar]
- Krasovskiy, P., Tsyplenkov, D., Nesterova, O. (2013). Operating dynamics of parameters and technical losses in the components of power supply systems. Energy Efficiency Improvement of Geotechnical Systems Proceedings of the International Forum on Energy Efficiency, 113-119 [CrossRef] [Google Scholar]
- Sadovenko, I., Rudakov, D., Inkin, O. (2014). Geotechnical schemes to the multipurpose use of geothermal energy and resources of abandoned mines. Progressive Technologies of Coal, Coalbed Methane, and Ores Mining, 443-450 [CrossRef] [Google Scholar]
- Bazhenov, V.A., Gulyar, A.I., Piskunov, S.O., Andrievskii, V.P. (2013). Design life assessment of the blade root of a gas turbine unit under thermomechanical loading. Strength of Materials, 45(3), 329-339. DOI: 10.1007/s11223-013-9463-0 [CrossRef] [Google Scholar]
- Chigirinsky, V., Putnoki, A. (2017). Development of dynamic model of transients in mechanical systems using argument-functions. Easten-European Journal of Enterprise Technologies, Vol. 3, 7(87), 11-22. DOI: 10.15587/1729-4061.2017.101282 [CrossRef] [Google Scholar]
- Bazhenov, V.A., Gulyar, A.I., Piskunov, S.O., Shkryl, A.A. (2006). Life assessment for a gas turbine blade under creep conditions based on continuum fracture mechanics. Strength of Materials, 38(4), 392-397. DOI: 10.1007/s11223-006-0055-0 [CrossRef] [Google Scholar]
- Bondarenko, V.I., Samusya, V.I., Smolanov, S.N. (2005). Mobile lifting units for wrecking works in pit shafts. Gornyi Zhurnal, (5), 99-100 [Google Scholar]
- Belmas, I., Kolosov, D. (2011). The stress-strain state of the stepped rubber-rope cable in bobbin of winding. Technical and Geoinformational Systems in Mining: School of Underground Mining 2011, 211-214 [CrossRef] [Google Scholar]
- Denyshchenko, O., Shyrin, A., Rastsvietaiev, V., Cherniaiev, O. (2018). Forming the structure of automated system to control ground heavy-type ropeways. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (4), 79-85. DOI: 10.29202/nvngu/2018-4/12 [CrossRef] [Google Scholar]
- Kolesnik, V.Ye., Kulikova, D.V., Pavlichenko, A.V. (2016). Substantiation of rational parameters of perforated area of partitions in an improved mine water settling basin. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (6), 120-127 [Google Scholar]
- Kolosov, D., Dolgov, O., Kolosov, A. (2014). Analytical determination of stress-strain state of rope caused by the transmission of the drive drum traction. Progressive Technologies of Coal, Coalbed Methane, and Ores Mining, 499-504 [CrossRef] [Google Scholar]
- Loveikin, V.S, Romasevych, Yu.O. (2017). Dynamic optimization of a mine winder acceleration mode. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (4), 55-61 [Google Scholar]
- Franchuk, V.P., Ziborov, K.A., Krivda, V.V., Fedoriachenko, S.O. (2017). On wheel rolling along the rail regime with longitudinal load. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (3), 62-67 [Google Scholar]
- Kravets, V., Sakhno, V., Bas, K., Kravets, V. (2018). Program spatial movement of high-speed vehicles. In: IOP Conf. Ser.: Mater. Sci. Eng. 383 012032. DOI: 10.1088/1757-899X/383/1/012032 [CrossRef] [Google Scholar]
- Ziborov, K., Fedoriachenko, S. (2015). On influence of additional members’ movability of mining vehicle on motion characteristics. New Developments in Mining Engineering 2015: Theoretical and Practical Solutions of Mineral Resources Mining, 237-241 [CrossRef] [Google Scholar]
- Filimonikhin, G., Olijnichenko, L. (2015). Investigation of the possibility of balancing aerodynamic imbalance of the impeller of the axial fan by correction of masses. Eastern-European Journal of Enterprise Technologies, 5, 7(77), 30-35. DOI: 10.15587/1729-4061.2015.51195 [CrossRef] [Google Scholar]
- Chigirinsky, V.V., Legotkin, G.I., Slepynin, A.G., Kozlov, V.I., Dragobetsky, V.V. (2015). Mechanisms of plastic deformation in case of production of thin-walled rolled stock of the special purpose. Metallurgical and Mining Industry, (11), 222-230 [Google Scholar]
- Filimonikhin, G., Filimonikhina, I., Yakymenko, M., Yakimenko, S. (2017). Application of the empirical criterion for the occurrence of auto-balancing for axisymmetric rotor on two isotropic elastic supports. Eastern-European Journal of Enterprise Technologies, 2, 7(86), 51-58. DOI: 10.15587/1729-4061.2017.96622 [CrossRef] [Google Scholar]
- Kolosov, L.V., Bel'mas, I.V. (1981). Use of electrical models for investigating composites. Mechanics of Composite Materials, 17(1), 115-119 [CrossRef] [Google Scholar]
- Marasová, D., Ambriško, Ľ., Andrejiová, M., Grinčová, A. (2017). Examination of the process of damaging the top covering layer of a conveyor belt applying the FEM. Journal of the International Measurement Confederation, (112). 47-52. DOI: 10.1016/j.measurement.2017.08.016 [CrossRef] [Google Scholar]
- Blazej, R., Jurdziak, L., Burduk, R., Kirjanow, A., Kozlowski, T. (2017). Analysis of core failure distribution in steel cord belts on the cross-section. International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, 17(13), 987-994. DOI: 10.5593/sgem2017/13/S03.125 [Google Scholar]
- Song, W., Shang, W., Li, X. (2009). Finite element analysis of steel cord conveyor belt splice. ET Conference Publications, 2009(556). DOI: 10.1049/cp.2009.1415 [Google Scholar]
- Levchenya, Zh.B. (2004). Povyshenie nadezhnosti stykovykh soedineniy konveyernykh lent na gornodobyvayushchikh predpriyatiyakh: Na primere RUP “PO “Belaruskaliy” Ph.D. MGOU [Google Scholar]
- Tantsura H.I. (2010). Gnuchkі tyagovі organy. Stikovі zyednannya konveyernykh strіchok. Dnіprodzerzhins'k: DDTU [Google Scholar]
- Volokhovskiy V.Yu., Radin V.P., Rudyak M.B. (2010). Kontsentratsiya usiliy v trosakh i nesushchaya sposobnost' rezinotrosovykh konveyernykh lent s povrezhdeniyami. MEI Bulletin, (5), 5-12 [Google Scholar]
- Darіya Zade S. (2013). Chislennaya metodika opredeleniya effektivnykh kharakteristik odnonapravleno armirovannykh kompozitov. Bulletin NTU “KhPI”, (58), 71-77 [Google Scholar]
- Bel'mas, I.V. (1993). Stress state of rubber-rope tapes during their random damages. Problemy Prochnosti i Nadezhnos'ti Mashin, (6), 45-48 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.