Open Access
Issue
E3S Web Conf.
Volume 111, 2019
CLIMA 2019 Congress
Article Number 04045
Number of page(s) 10
Section High Energy Performance and Sustainable Buildings, Simulation models and predictive tools for the buildings HVAC, IEQ and energy
DOI https://doi.org/10.1051/e3sconf/201911104045
Published online 13 August 2019
  1. F. Hammad, B. Abu-Hijleh, ENERG BUILDINGS 42, 1888-1895 (2010) [CrossRef] [Google Scholar]
  2. M. Bojić, K. Johannes, F. Kuznik, ENERG BUILDINGS 70, 279-286 (2014) [CrossRef] [Google Scholar]
  3. F. Ascione, RF. De Masi, F. de Rossi, S. Ruggiero, GP. Vanoli, APPL ENERG 183, 938–957 (2016) [CrossRef] [Google Scholar]
  4. M.G. Ignjatović, B.D. Blagojević, B.V. Stojanović, M.M. Stojiljković, THERM SCI 16, 461-469 (2012) [CrossRef] [Google Scholar]
  5. A.S. Anđelković, B. Gvozdenac-Urošević, M. Kljajić, M.G. Ignjatović, ENERG BUILDINGS 86, 766-781 (2015) [CrossRef] [Google Scholar]
  6. Y.B. Seong, J.H. Lim, ENERGIES 6, 5219-5230 (2013) [CrossRef] [Google Scholar]
  7. G. Kokogiannakis, A. Tietje, J. Darkwa, PROCEDIA ENVIRON SCI 11, 604-610 (2010) [CrossRef] [Google Scholar]
  8. M. Bojić, N. Nikolić, D. Nikolić, J. Skerlić, I. Miletić, ENERG BUILDINGS 43, 1207-1215 (2011) [CrossRef] [Google Scholar]
  9. B.V. Stojanović, J.N. Janevski, P.B. Mitković, M.B. Stojanović, M.G. Ignjatović, THERM SCI 18, 1011-1018 (2014) [CrossRef] [Google Scholar]
  10. C. Lamnatou, J.D. Mondol, D. Chemisana, C. Maurer, RENEW SUST ENERG REV 48, 178-191 (2015) [CrossRef] [Google Scholar]
  11. C. Lamnatou, J.D. Mondol, D. Chemisana, C. Maurer, RENEW SUST ENERG REV 45, 36-51 (2015) [CrossRef] [Google Scholar]
  12. M. Bojić, N. Nikolić, D. Nikolić, J. Skerlić, I. Miletić, APPL ENERG 88, 2407-2419 (2011) [CrossRef] [Google Scholar]
  13. M.K. Rodrigues, R. da Silva Brum, J. Vaz, L.A.O. Rocha, E.D. dos Santos, L.A. Isoldi, RENEW ENERG 80, 538–551 (2015) [CrossRef] [Google Scholar]
  14. P. Hernandez, P. Kenny, ENERG POLICY 39, 3779-3788 (2011) [CrossRef] [Google Scholar]
  15. Drury Browne Crawley IV, B, Building performance simulation: a tool for policymaking, PhD Thesis, University of Strathclyde (2008) [Google Scholar]
  16. L. Norford, R. Socolow, E.S. Hsieh, G. Spadaro, ENERG BUILDINGS 21, 121-131 (1994) [CrossRef] [Google Scholar]
  17. D. Marchio, A. Rabl, ENERG BUILDINGS 17, 131-139 (1991) [CrossRef] [Google Scholar]
  18. G. Branco, B. Lachal, P. Gallinelli, W. Weber, ENERG BUILDINGS 34, 543-555 (2004) [CrossRef] [Google Scholar]
  19. Guideline, A, Guideline 14-2002, Measurement of Energy and Demand Savings. American Society of Heating, Ventilating, and Air Conditioning Engineers, Atlanta, Georgia, (2002) [Google Scholar]
  20. Subcommittee, IR, Concepts and Practices for Determining Energy Savings in Renewable Energy Technologies Applications (Vol. Ⅲ). International Performance Measurement & Verification Protocol, (2003) [Google Scholar]
  21. FEMP, M, Guidelines: Measurement and Verification for Federal Energy Projects, Version 3.0. Energy Efficiency and Renewable Energy, (2008) [Google Scholar]
  22. T.A. Reddy, I. Maor, C. Panjapornpon, HVAC&R RES 13, 221-241 (2007) [CrossRef] [Google Scholar]
  23. J. Sun, T.A. Reddy, HVAC&R RES 12, 177-196 (2006) [CrossRef] [Google Scholar]
  24. M. Killian, M. Kozek, BUILD ENVIRON 105, 403-412 (2016) [CrossRef] [Google Scholar]
  25. I. Hazyuk, C. Ghiaus, D. Penhouet, D, BUILD ENVIRON 51, 379-387 (2012) [CrossRef] [Google Scholar]
  26. S. Cho, M. Zaheer-Uddin, ENERG COVERS MANAG 44, 1333-1342 (2003) [CrossRef] [Google Scholar]
  27. J. Cigler, S. Prívara, Z. Váňa, E. Žáčeková, L. Ferkl, ENERG BUILDINGS 52, 39-49 (2012) [CrossRef] [Google Scholar]
  28. J. Clarke, J. Cockroft, S. Conner, J. Hand, N. Kelly, R. Moore, R, et al. , ENERG BUILDINGS 34, 933-940 (2002) [CrossRef] [Google Scholar]
  29. F. Oldewurtel, A. Parisio, C.N. Jones, D. Gyalistras, M. Gwerder, V. Stauch, et al. , ENERG BUILDINGS 45, 15-27 (2012) [CrossRef] [Google Scholar]
  30. H. Karlsson, C.E. Hagentoft, BUILD ENVIRON 46, 556-569 (2011) [CrossRef] [Google Scholar]
  31. B. Coffey, F. Haghighat, E. Morofsky, E. Kutrowski, ENERG BUILDINGS 42, 1084-1092 (2010) [CrossRef] [Google Scholar]
  32. J.R. Dobbs, B.M. Hencey, ENERG BUILDINGS 82, 675-684 (2014) [CrossRef] [Google Scholar]
  33. M.M. Stojiljković, M.G. Ignjatović, G.D. Vučković, ENERG J 92, 420-434 (2015) [CrossRef] [Google Scholar]
  34. M.G. Ignjatović, B.D. Blagojević, M.M. Stojiljković, D.M. Mitrović, A.S. Andjelković, M.B. Ljubenović, THERM SCI 20, S1485-S1500 (2016) [CrossRef] [Google Scholar]
  35. USDOE, Energy Plus Energy Simulation Software. [Google Scholar]
  36. C.B. Corbin, G.P. Henze, P. May-Ostendorp, J BUILD PERFORM SIMU 6, 159-174 (2013) [CrossRef] [Google Scholar]
  37. P. Ferreira, A. Ruano, S. Silva, E. Conceicao, ENERG BUILDINGS 55, 238-251 (2012) [CrossRef] [Google Scholar]
  38. A. Kusiak, G. Xu, Z. Zhang, ENERG COVERS MANAG 85, 146-153 (2014) [CrossRef] [Google Scholar]
  39. J. Ma, S.J. Qin, T. Salsbury, J PROCESS CONTR 24, 1282-1291 (2014) [CrossRef] [Google Scholar]
  40. C.R. Touretzky, M. Baldea, J PROCESS CONTR 24, 1292-1300 (2014) [CrossRef] [Google Scholar]
  41. X. Li, A. Malkawi, ENERG J 112, 1194-1206 (2016) [CrossRef] [Google Scholar]
  42. P. May-Ostendorp, G.P. Henze, C.D. Corbin, B. Rajagopalan, C. Felsmann, C, BUILD ENVIRON 46, 428-437 (2011) [CrossRef] [Google Scholar]
  43. I. Hazyuk, C. Ghiaus, D. Penhouet, BUILD ENVIRON 51, 388-394 (2012) [CrossRef] [Google Scholar]
  44. S. Hussain, H.A. Gabbar, D. Bondarenko, F. Musharavati, S. Pokharel, CONTROL ENG PRACT 32, 172-182 (2014) [CrossRef] [Google Scholar]
  45. Iso, E, 730: 2005. Ergonomics of the thermal environment-Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria, (2005) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.