Open Access
Issue
E3S Web Conf.
Volume 111, 2019
CLIMA 2019 Congress
Article Number 05022
Number of page(s) 8
Section Information and Communication Technologies (ICT) for the Intelligent Building Management
DOI https://doi.org/10.1051/e3sconf/201911105022
Published online 13 August 2019
  1. Frederiksen S, Werner S. District Heating and Cooling: Studentlitteratur, 2013. [Google Scholar]
  2. Lund H, Werner S, Wiltshire R, Svendsen S, Thorsen JE, Hvelplund F, et al. 4th Generation District Heating (4GDH) Integrating smart thermal grids into future sustainable energy systems. Energy. 2014; 68: 1–11. [CrossRef] [EDP Sciences] [Google Scholar]
  3. Li H, Nord N. Transition to the 4th generation district heating-possibilities, bottlenecks, and challenges. Energy Procedia. 2018; 149: 483–98. [Google Scholar]
  4. Lund H, Möller B, Mathiesen BV, Dyrelund A. The role of district heating in future renewable energy systems. Energy. 2010; 35 (3): 1381–90. [CrossRef] [Google Scholar]
  5. IEA. Future low temperature district heating design guidebook. In: Schmidt D, Kallert A, editors. AGFW-Project Company Stresemannallee, Germany: International Energy Agency Technology Collaboration Programme on District Heating and Cooling including Combined Heat and Power; 2017. [Google Scholar]
  6. Brand M, Svendsen S. Renewable-based low-temperature district heating for existing buildings in various stages of refurbishment. Energy. 2013; 62: 311–9. [CrossRef] [Google Scholar]
  7. Nord N, Ingebretsen M, Tryggestad I. Possibilities for Transition of Existing Residential Buildings to Low Temperature District Heating System in Norway. Conference Possibilities for Transition of Existing Residential Buildings to Low Temperature District Heating System in Norway. p. 22-5. [Google Scholar]
  8. Østergaard DS, Svendsen S. Theoretical overview of heating power and necessary heating supply temperatures in typical Danish single-family houses from the 1900s. Energy and Buildings. 2016; 126: 375–83. [Google Scholar]
  9. AS P, AS E. Potential and barrier study-Energy efficiency of Norwegian buildings (in Norwegian). 2012. [Google Scholar]
  10. Administration TNOoBTa. Guidance on technical requirements for construction work- Building Technology Regulations (TEK17) with guidance (in Norwegian) 2017. [Google Scholar]
  11. Administration TNOoBTa. Guidance on technical requirements for construction work- Building Technology Regulations (TEK10) with guidance (in Norwegian) 2010. [Google Scholar]
  12. Housing conditions, survey on living conditions, https://www.ssb.no/en/bygg-bolig-og-eiendom/statistikker/bo. 2019. [Google Scholar]
  13. CEN. SN-CEN/TR 12831-2: Energy Performance of Buildings - Method of Calculating Dimensional Power Requirements for Heat - Part 2: Explanation and Explanation of NS-EN 12831-1, Module M3-3. 2017. [Google Scholar]
  14. CEN. NS-EN 15251: Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics. 2014. [Google Scholar]
  15. Ingebretsen ME. Possibilities for transition of existing buildings to low temperature district heating (in Norwegian): Norwegian University of Science and Technology, 2014. [Google Scholar]
  16. Kim S, Zirkelbach D, Künzel HM, Lee J-H, Choi J. Development of test reference year using ISO 15927-4 and the influence of climatic parameters on building energy performance. Building and Environment. 2017; 114: 374–86. [Google Scholar]
  17. Standardization ECf. EN ISO 15927-42005: Hygrothermal Performance of Buildings–Calculation and Presentation of Climatic Data–Part 4 Hourly Data for Assessing the Annual Energy Use for Heating and Cooling. 2005. [Google Scholar]
  18. Modelica and the Modelica Association, https://www.modelica.org/. 2019. [Google Scholar]
  19. CATIA SYSTEMS ENGINEERING - DYMOLA, https://www.3ds.com/products-services/catia/products/dymola/key-advantages/. 2019. [Google Scholar]
  20. Müller D, Lauster M, Constantin A, Fuchs M, Remmen P. AixLib-An Open-Source Modelica Library within the IEA-EBC Annex 60 Framework. BauSIM 20162016. p. 3-9. [Google Scholar]
  21. Open source library for building energy and control systems, https://simulationresearch.lbl.gov/modelica/. 2019. [Google Scholar]
  22. Constantin A, Streblow R, Müller D. The modelica housemodels library: Presentation and evaluation of a room model with the ASHRAE Standard 140. Conference The modelica housemodels library: Presentation and evaluation of a room model with the ASHRAE Standard 140. Linköping University Electronic Press, p. 293-9. [Google Scholar]
  23. Tritschler M. Assessment of the accuracy of heat cost allocators (in German): University of Stuttgart, 1999. [Google Scholar]
  24. Gluck B. Heat transfer: Heat dissipation of space heating surfaces and pipes (in German): Verlag für Bauwesen Berlin, 1990. [Google Scholar]
  25. He P, Sun G, Wang F, Wu H, WU X. Heating engineering (in Chinese): China Architecture & Building Press, 2009. [Google Scholar]
  26. CEN. EN 442-2: Radiators and Convectors–Part 2: Test Methods and Rating. 2003. [Google Scholar]
  27. Prek M, Krese G. Experimental analysis of an improved regulation concept for multi-panel heating radiators: Proof-of-concept. Energy. 2018; 161: 52–9. [Google Scholar]
  28. Seifert J, Knorr M, Meinzenbach A, Bitter F, Gregersen N, Krogh T. “Review of thermostatic control valves in the European standardization system of the EN 15316-2/EN 215”. Energy and Buildings. 2016; 125: 55–65. [Google Scholar]
  29. CEN. EN215: Thermostatic Radiator Valves-Requirements and Test Methods. 2004. [Google Scholar]
  30. Xu B, Fu L, Di H. Dynamic simulation of space heating systems with radiators controlled by TRVs in buildings. Energy and Buildings. 2008; 40 (9): 1755–64. [Google Scholar]
  31. Wang Y, You S, Zheng X, Zhang H. Accurate model reduction and control of radiator for performance enhancement of room heating system. Energy and Buildings. 2017; 138: 415–31. [Google Scholar]
  32. Tahersima F, Stoustrup J, Rasmussen H. An analytical solution for stability-performance dilemma of hydronic radiators. Energy and Buildings. 2013; 64: 439–46. [Google Scholar]
  33. Østergaard DS, Svendsen S. Are typical radiators over-dimensioned? An analysis of radiator dimensions in 1645 Danish houses. Energy and Buildings. 2018; 178: 206–15. [Google Scholar]
  34. Tunzi M, Østergaard DS, Svendsen S, Boukhanouf R, Cooper E. Method to investigate and plan the application of low temperature district heating to existing hydraulic radiator systems in existing buildings. Energy. 2016; 113: 413–21. [Google Scholar]
  35. Yang X, Li H, Svendsen S. Evaluations of different domestic hot water preparing methods with ultra-low-temperature district heating. Energy. 2016; 109: 248–59. [CrossRef] [Google Scholar]
  36. CEN. CEN/TR 16355: Recommendations for prevention of Legionella growth in installations inside buildings conveying water for human consumption. 2012. [Google Scholar]
  37. Østergaard DS, Svendsen S. Experience from a practical test of low-temperature district heating for space heating in five Danish single-family houses from the 1930s. Energy. 2018; 159: 569–78. [Google Scholar]
  38. Peffer T, Pritoni M, Meier A, Aragon C, Perry D. How people use thermostats in homes: A review. Building and Environment. 2011; 46 (12): 2529–41. [Google Scholar]
  39. Prívara S, Široký J, Ferkl L, Cigler J. Model predictive control of a building heating system: The first experience. Energy and Buildings. 2011; 43 (2): 564–72. [Google Scholar]
  40. Nord N, Tereshchenko T, Qvistgaard LH, Tryggestad IS. Influence of occupant behavior and operation on performance of a residential Zero Emission Building in Norway. Energy and Buildings. 2018; 159: 75–88. [Google Scholar]
  41. D’Oca S, Hong T, Langevin JJR, Reviews SE. The human dimensions of energy use in buildings: A review. 2018; 81: 731–42. [Google Scholar]
  42. Sun K, Hong T. A framework for quantifying the impact of occupant behavior on energy savings of energy conservation measures. Energy and Buildings. 2017; 146: 383–96. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.