EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 123 (2019) E3S Web Conf., 123 (2019) 01002 References
Open Access
Issue
E3S Web Conf.
Volume 123, 2019
Ukrainian School of Mining Engineering - 2019
Article Number 01002
Number of page(s) 9
DOI https://doi.org/10.1051/e3sconf/201912301002
Published online 22 October 2019
  1. Salcher, M., & Bertuzzi, R. (2018). Results of pull tests of rock bolts and cable bolts in Sydney sandstone and shale. Tunnelling and Underground Space Technology, (74), 60-70. https://doi.org/10.1016/j.tust.2018.01.004 [CrossRef] [Google Scholar]
  2. Blanco-Martín, L., Tijani, M., Hadj-Hassen, F., & Noiret, A. (2013). Assessment of the bolt-grout interface behaviour of fully grouted rockbolts from laboratory experiments under axial loads. International Journal of Rock Mechanics and Mining Sciences, (63), 50-61. https://doi.org/10.1016/j.ijrmms.2013.06.007 [CrossRef] [Google Scholar]
  3. Kang, H., Yang, J., & Meng, X. (2015) Tests and analysis of mechanical behaviors of rock bolt components for China’s coal mine roadways. Journal of Rock Mechanics and Geotechnical Engineering, 7(1), 14-26. https://doi.org/10.1016/j.jrmge.2014.12.002 [CrossRef] [Google Scholar]
  4. SOU 10.1.05411357.010:2014. (2014). Systema zabezpechennia nadiinoho funktsionuvannia hirnychykh vyrobok z ankernym kriplenniam. Zagalni tekhnichni vymohy. Kyiv: Minenerhovuhillia Ukrainy. [Google Scholar]
  5. Bondarenko, V., Kovalevs’ka, I., Svystun, R., & Cherednichenko, Y. (2013). Optimal parameters of wall bolts computation in the united bearing system of extraction workings frame-bolt support. Annual Scientific-Technical Collection – Mining of Mineral Deposits, 5-9. http://dx.doi.org/10.1201/b16354-3 [Google Scholar]
  6. Kovalevska, I., Symanovych, G., & Fomychov, V. (2013). Research of stress-strain state of cracked coal-containing massif near-the-working area using finite elements technique. Annual Scientific-Technical Collection – Mining of Mineral Deposits, 159-163. http://dx.doi.org/10.1201/b16354-28 [Google Scholar]
  7. GOST R 52042–2003. (2004). Krepi ankernye. Obshchie tekhnicheskie usloviya. Moskva: Izdatel’stvo standartov. RF. [Google Scholar]
  8. VSN 126–90. (1991). Kreplenie vyrabotok nabryzgbetonom i ankerami pri stroitelstve transportnykh tonneley i metropolitenov. Moskva, RF. [Google Scholar]
  9. Skipochka, S.I., Palamarchuk, T.A., Mukhin, A.V., & Chervatuk, V.G. (2002). Vibroakusticheskiy control’ dinamiki sistemy “ugleporodnyy massiv – krep’ gornykh vyrabotok”. Geo-Technical Mechanics, (36), 131-135. [Google Scholar]
  10. Ivanovic, A., & Neilson, R. D. (2008). Influence of geometry and material properties on the axial vibration of a rock bolt. International Journal of Rock Mechanics and Mining Sciences, 45(6), 941-951. https://doi.org/10.1016/j.ijrmms.2007.10.003 [CrossRef] [Google Scholar]
  11. Vinogradov, V.V., & Adorskaya, L.G. Sistema monitoringa gornykh vyrabotok s opornoankernoy krep’yu (2002). Geo-Technical Mechanics, (38), 29-41. [Google Scholar]
  12. Gale, W.J., Mark, C., Oyler, D.C., & Chen, J. (2004). Computer Simulation of Ground Behaviour and Rock Bolt Interaction at Emerald Mine 2004. Proc. 23rd Intl. Conf. on Ground Control in Mining. Morgantown, West Virginia University, 27-34. [Google Scholar]
  13. Madenga, V., Zou, D.H., & Zhang, C. (2006). Effects of curing time and frequency on ultrasonic wave velocity in grouted rock bolts. Journal of Applied Geophysics, 59(1), 79-87. https://doi.org/10.1016/j.jappgeo.2005.08.001 [Google Scholar]
  14. Shi, Z.M., Liu, L., Peng, M., Liu, C.C., Tao, F.J., & Liu, C.S. (2018). Non-destructive testing of full-length bonded rock bolts based on HHT signal analysis. Journal of Applied Geophysics, (151), 47-65. https://doi.org/10.1016/j.jappgeo.2018.02.001 [Google Scholar]
  15. Voznesenskiy, E.A. (2007). Identifikatsiya defektnykh ankerov podzemnykh vyrabotok putem analiza arusticheskogo otklika. Collection of works of the XIX session of the Russian Acoustical Society. Moskva: GEOS, (1), 365-369. [Google Scholar]
  16. Voznesenskiy, A.S., Koryakin, V.V., & Voznesenskiy, E.A. (2016). Physico-technical evaluation of shock response spectrum method for strata bolting control. Gornyi Zhurnal, 2224(3), 17-20. [Google Scholar]
  17. Blahut, R.E. (2010). Fast Algorithms for Signal Processing. University of Illinois, Urbana-Champaign. https://doi.org/10.1017/CBO9780511760921 [CrossRef] [Google Scholar]
  18. Skipochka, S.I., Serhiienko, V.N., & Krasovskyi, I.S. (2017). Rationale of mounting quality control parameters for anchors in rocks by vibroacoustic method. Metallurgical and Mining Industry, 304(1), 106-110. [Google Scholar]
  19. Skipochka, S.I., Sergienko, V.N., & Krasovskiy, I.S. (2018). Rationale of improved method of anchorage impact-wave control. Up-to-date resource- and energy-saving technologies in mining industry, 21(1), 47-55. [CrossRef] [Google Scholar]
  20. Skipochka, S., Krukovskyi, O., Serhiienko, V., & Krasovskyi, I. (2019) Non-destructive testing of rock bolt fastening as an element of monitoring the state of mine workings. Mining of Mineral Deposits, 13(1), 16-23. https://doi.org/10.33271/mining13.01.016 [CrossRef] [Google Scholar]
  21. Skipochka, S.I., Serhiienko, V.N., & Krasovskyi, I.S. (2018). Sposib kontroliu yakosti zakriplennia ankernoho stryzhnia v sverdlovyni. Utility Patent No. 122418, Ukraine. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.