The simulation of gas-dynamic characteristics of centrifugal compressors in turbo-expander units

A. Rekstin; V. Semenovskiy; K. Soldatova; Y. Galerkin; K. Sokolov

doi:10.1051/e3sconf/201912401008

All issues

Volume 124 (2019)

E3S Web Conf., 124 (2019) 01008

References

Open Access

Issue		E3S Web Conf. Volume 124, 2019 International Scientific and Technical Conference Smart Energy Systems 2019 (SES-2019)


Article Number		01008
Number of page(s)		5
Section		Energy Systems and Complexes
DOI		https://doi.org/10.1051/e3sconf/201912401008
Published online		25 October 2019

Z. Galiullin, V. Salnikov, V. Shchurovsky, Modern gas-transportation systems and technologies. Moscow. 345 (2014) [Google Scholar]
A. Rekstin, V. Semenovskiy, Y. Galerkin, A. Sokolov, The analysis of design and measured gas-dynamic characteristics of the centrifugal compressor within turboexpander aggregate – Oil and Gas Engineering (OGE-2018) AIP Conf. Proc. 2007. – Omsk. – Russia. – 2018. 030028-1–030028-11; https://doi.org/10.1063/1.5051889 (2018) [Google Scholar]
K. Seleznev, Y. Galerkin, E. Popova, Simplified mathematical model of losses in centrifugal compressor stage. Collection of proceedings. Voronezh (1988) [Google Scholar]
Y. Galerkin, Turbocompressors. LTD information and publishing center KHT. Moscow. 596 (2010) [Google Scholar]
Y. Galerkin and K. Soldatova, Modeling the working process of industrial centrifugal compressors. Scientific fundamentals, stages of development, current state (Publishing house of Polytechnic University) 327 (2011) [Google Scholar]
Y. Galerkin and K. Soldatova, The application of the Universal Modeling Method to development of centrifugal compressor model stages. Conference “Compressors and their Systems”. London. 477–487 (2013) [Google Scholar]
Y. Galerkin, A. Rekstin and K. Soldatova Gas dynamic design of the pipe line compressor with 90% efficiency. Model test approval. Conference “Compressors and their Systems” London (2015) [Google Scholar]
Y. Galerkin and A. Drozdov, New generation of Universal modeling for centrifugal compressors calculation. Conference “Compressors and their Systems” London (2015) [Google Scholar]
Y. Galerkin, K. Soldatova, and A. Drozdov, The application of mathematical models for industrial centrifugal compressor optimal design // ICCMS 2018: 10th International Conference on Computer Modeling and Simulation. – Australia. Sydney. – Paper ID: 008 (2018) [Google Scholar]
Y. Galerkin, A. Rekstin, K. Soldatova and A. Drozdov, Universal modeling method – the instrument for centrifugal compressor gas dynamic design. ASME Gas Turbine India Conference (2015) [Google Scholar]
A. Rekstin, Popova Y. and A. Ucehovscy, Centrifugal compressor stages efficiency analysis by means of the approximate algebraic equations. Oil and Gas Engineering (OGE-2018). AIP Conf. Proc. 2007. – Omsk. – Russia. –. 030036-1–030036–11 (2018) [Google Scholar]
Y. Galerkin and K. Soldatova, Universal modeling method application for development of centrifugal compressor model stages. International Conference “Compressors and their Systems”. London (2013) [Google Scholar]
Y. Galerkin, K. Soldatova and A. Drozdov, New version of the universal modelling for centrifugal compressor gas dynamic design. Purdue Conference. USA (2014) [Google Scholar]
Y. Galerkin, A. Rekstin., K. Soldatova and Drozdov A. Gas dynamic designs of centrifugal compressors for gas industry. Specific features. ASME Gas Turbine India Conference (2015) [Google Scholar]
Y. Galerkin and A. Drozdov, Centrifugal compressor stage design principlies cheking. ASME Gas Turbine India Conference (2015) [Google Scholar]
Y. Galerkin, A. Drozdov, A. Rekstin, and Soldatova K., An alternative method for centrifugal compressor loading factor modelling. Conference “Compressors and their Systems” London (2017) [Google Scholar]
Y. Galerkin, and K. Soldatova, Loading factor performance of a centrifugal compressor impeller. Specific features and way of modeling. World Academy of Science, Engineering and Technology. 18th International Conference on Mathematics and Statistical Engineering. – Australia. Sydney. 3 (12), 822 (2016) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] Z. Galiullin, V. Salnikov, V. Shchurovsky, Modern gas-transportation systems and technologies. Moscow. 345 (2014) [Google Scholar]

[2] A. Rekstin, V. Semenovskiy, Y. Galerkin, A. Sokolov, The analysis of design and measured gas-dynamic characteristics of the centrifugal compressor within turboexpander aggregate – Oil and Gas Engineering (OGE-2018) AIP Conf. Proc. 2007. – Omsk. – Russia. – 2018. 030028-1–030028-11; https://doi.org/10.1063/1.5051889 (2018) [Google Scholar]

[3] K. Seleznev, Y. Galerkin, E. Popova, Simplified mathematical model of losses in centrifugal compressor stage. Collection of proceedings. Voronezh (1988) [Google Scholar]

[4] Y. Galerkin, Turbocompressors. LTD information and publishing center KHT. Moscow. 596 (2010) [Google Scholar]

[5] Y. Galerkin and K. Soldatova, Modeling the working process of industrial centrifugal compressors. Scientific fundamentals, stages of development, current state (Publishing house of Polytechnic University) 327 (2011) [Google Scholar]

[6] Y. Galerkin and K. Soldatova, The application of the Universal Modeling Method to development of centrifugal compressor model stages. Conference “Compressors and their Systems”. London. 477–487 (2013) [Google Scholar]

[7] Y. Galerkin, A. Rekstin and K. Soldatova Gas dynamic design of the pipe line compressor with 90% efficiency. Model test approval. Conference “Compressors and their Systems” London (2015) [Google Scholar]

[8] Y. Galerkin and A. Drozdov, New generation of Universal modeling for centrifugal compressors calculation. Conference “Compressors and their Systems” London (2015) [Google Scholar]

[9] Y. Galerkin, K. Soldatova, and A. Drozdov, The application of mathematical models for industrial centrifugal compressor optimal design // ICCMS 2018: 10th International Conference on Computer Modeling and Simulation. – Australia. Sydney. – Paper ID: 008 (2018) [Google Scholar]

[10] Y. Galerkin, A. Rekstin, K. Soldatova and A. Drozdov, Universal modeling method – the instrument for centrifugal compressor gas dynamic design. ASME Gas Turbine India Conference (2015) [Google Scholar]

[11] A. Rekstin, Popova Y. and A. Ucehovscy, Centrifugal compressor stages efficiency analysis by means of the approximate algebraic equations. Oil and Gas Engineering (OGE-2018). AIP Conf. Proc. 2007. – Omsk. – Russia. –. 030036-1–030036–11 (2018) [Google Scholar]

[12] Y. Galerkin and K. Soldatova, Universal modeling method application for development of centrifugal compressor model stages. International Conference “Compressors and their Systems”. London (2013) [Google Scholar]

[13] Y. Galerkin, K. Soldatova and A. Drozdov, New version of the universal modelling for centrifugal compressor gas dynamic design. Purdue Conference. USA (2014) [Google Scholar]

[14] Y. Galerkin, A. Rekstin., K. Soldatova and Drozdov A. Gas dynamic designs of centrifugal compressors for gas industry. Specific features. ASME Gas Turbine India Conference (2015) [Google Scholar]

[15] Y. Galerkin and A. Drozdov, Centrifugal compressor stage design principlies cheking. ASME Gas Turbine India Conference (2015) [Google Scholar]

[16] Y. Galerkin, A. Drozdov, A. Rekstin, and Soldatova K., An alternative method for centrifugal compressor loading factor modelling. Conference “Compressors and their Systems” London (2017) [Google Scholar]

[17] Y. Galerkin, and K. Soldatova, Loading factor performance of a centrifugal compressor impeller. Specific features and way of modeling. World Academy of Science, Engineering and Technology. 18th International Conference on Mathematics and Statistical Engineering. – Australia. Sydney. 3 (12), 822 (2016) [Google Scholar]