Open Access
Issue
E3S Web Conf.
Volume 128, 2019
XII International Conference on Computational Heat, Mass and Momentum Transfer (ICCHMT 2019)
Article Number 10006
Number of page(s) 6
Section Computational Thermal Fluid Dynamics
DOI https://doi.org/10.1051/e3sconf/201912810006
Published online 08 November 2019
  1. F. Biljecki, “The concept of level of detail in 3D city models”, GISt Report No. 62, Delft University of Technology, Netherlands (2013) [Google Scholar]
  2. B. Yang, R. Huang, J. Li, M. Tian, W. Dai, R. Zhong, “Automated Reconstruction of Building LoDs from Airborne LiDAR Point Clouds Using an Improved Morphological Scale Space”, Remote Sensing, 9(1) 14 (2017) [Google Scholar]
  3. D. Wagner, N. Alam, M. Wewetzer, M. Pries, V. Coors, “Methods for geometric data validation of 3D City models”, The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, XL-1/W5, pp.279–735 (2015) [Google Scholar]
  4. R. Piepereit, A. Schilling, N. Alam, M. Wewetzer, M. Pries, V. Coors, “Towards automatic processing of virtual city models for simulations” ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, IV-2/W1, pp.39–45 (2016) [CrossRef] [Google Scholar]
  5. J. Bogdahn, V. Coors, “Towards an automated healing of 3D urban models”, The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sci. XXXVII-4/W15, pp.13–17 (2010) [Google Scholar]
  6. J. Zhao, H. Ledoux, J. Stoter, “Automatic repair of CityGML LoD2 buildings using shrink-wrapping”, ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, II-2/W1, pp.309–317 (2013) [CrossRef] [Google Scholar]
  7. J.C. Michelin, J. Tierny, F. Tupin, C. Mallet, N. Paparoditis, “Quality evaluation of 3D city building models with automatic error diagnosis”, Int. Archives of the Photogrammetry, Remote Sensing and Spatial Information Sci., XL-7/W2, pp.161–166 (2013) [CrossRef] [Google Scholar]
  8. N. Alam, D. Wanger, M. Wewetzer, J. von Falkenhausen, V Coors, M. M. Pries, Towards automatic validation and healing of CityGML models for geometric and semantic consistency”, ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, II-2/W1, pp.1–6 (2013) [CrossRef] [Google Scholar]
  9. J. Villanueva, M. Ang, L. Inocencio, M. Rejuso, J. Tolentino, “Urban wind flow simulation of LIDAR- extracted building geometry in UP Diliman, Quezon City, Philippines using computation fluid dynamics model”, Asian Conference on Remote Sensing, Manila, Philippines, October (2015) [Google Scholar]
  10. http://www.ansys.com [Google Scholar]
  11. http://www.virtualcitysystems.de/en/products/buildingreconstruction [Google Scholar]
  12. http://www.citydoctor.eu [Google Scholar]
  13. http://www.freecadweb.org [Google Scholar]
  14. http://www.3dsystems.com/software/geomagic-wrap [Google Scholar]
  15. http://www.meshlab.net [Google Scholar]
  16. https://www.autodesk.de/products/netfabb/features/netfabb [Google Scholar]
  17. http://www.spaceclaim.com [Google Scholar]
  18. D.T. Mulder, Automatic Repair of 3D City Building Model Using a Voxel -based Repair Method”, Master Thesis, Delft Univ. Technology, Netherlands (2015) [Google Scholar]
  19. Y. Tominaga, B. Blocken, “Wind tunnel analysis of flow and dispersion in cross-ventilated isolated buildings: Impact of opening positions”, J. Wind. Eng. Ind. Aerodyn., 155, pp. 74–88 (2016) [CrossRef] [Google Scholar]
  20. D.G. Ebling, A. Krumm, B. Pfeiffelmann, J. Gottschald, J. Bruchmann, A.C Benim, M. Adam, R. Labs, R. R. Herbertz, A. Stunz, “Development of a system for thermoelectric heat recovery from stationary industrial processes”, Journal of Electronic Materials, 45(7), pp.3433–3439 (2016) [CrossRef] [Google Scholar]
  21. A. C Benim, “A finite element solution of radiative heat transfer in participating media utilizing the moment method”, Computer Methods in Applied Mechanics and Engineering, 67(1), pp.1–14 (1988) [CrossRef] [Google Scholar]
  22. P. Sagaut, Large Eddy Simulation for Incompressible Flows - An Introduction (Springer, Berlin, 2006) [Google Scholar]
  23. A.C. Benim, M.P. Escudier, A. Nahavandi, A.K Nickson, K.J Syed, F. Joos, “Experimental and numerical investigation of isothermal flow in an idealized swirl combustor”, International Journal of Numerical Methods for Heat & Fluid Flow, 20(3), pp.348–370 (2010) [CrossRef] [Google Scholar]
  24. A.C. Benim, S. Iqbal. W. Meier, F. Joos, A. Wiedermann, “Numerical investigation of turbulent swirling flames with validation in a gas turbine model combustor”, Applied Thermal Engineering, 110, pp.202–212 (2017) [CrossRef] [Google Scholar]
  25. P.A. Durbin, B.A. Pettersson Reif, Statistical Theory and Modeling for Turbulent Flows , 2nd Ed. (Wiley, Hoboken, NJ, USA, 2011) [Google Scholar]
  26. B.E. Launder, D.B. Spalding, “The numerical computation of turbulent flows”, Computer Methods in Applied Mechanics Engng, 3, pp. 269–289 (1972) [CrossRef] [Google Scholar]
  27. A.C. Benim, M. Geiger, S. Doehler, M. Schoenenberger, H. Roemer, “Modelling the flow in the exhaust hood of steam turbines under consideration of turbine-exhaust hood interaction”, in: Proceed. 1st European. Conf. Turbomachinery - Fluid Dynamic and Thermodynamic Aspects: Computational Methods, Erlangen, Germany, March 1-3, 1995, Book Series: VDI Ber., Vol.1185, pp.343–357 (VDI Verlag, Duesseldorf, 1995) [Google Scholar]
  28. TJ. Shih, W.W. Liou, A. Shabbir, Z. Yang, J. Zhu, 1995. “A new k-Ε model for high Reynolds number turbulent flows - Model development and validation”, Computers and Fluids, 24(3), pp–227–238 (1995) [CrossRef] [Google Scholar]
  29. F.R. Menter, “Two-equation eddy-viscosity turbulence models for engineering applications”, AIAA Journal, 32(8), pp.1598–1605 (1994) [NASA ADS] [CrossRef] [Google Scholar]
  30. A. Assmann, A.C. Benim, F. GÜl, P Lux, P Akhyari, U. Boeken, F. Joos, P. Feindt, A. Lichtenberg, Pulsatile extracorporeal circulation during on-pump cardiac surgery enhances aortic wall shear stress”, Journal of Biomechanics, 45(1), pp.156–163 (2012) [CrossRef] [PubMed] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.