Open Access
Issue |
E3S Web Conf.
Volume 135, 2019
Innovative Technologies in Environmental Science and Education (ITESE-2019)
|
|
---|---|---|
Article Number | 03001 | |
Number of page(s) | 13 | |
Section | Green Architecture and Sustainable Urban Design | |
DOI | https://doi.org/10.1051/e3sconf/201913503001 | |
Published online | 04 December 2019 |
- Wei Li, Linkai Xiao, Xiaochu Wang and Yi Ran, A Review of Mechanical Properties and Durability of Nano-concrete. Ad. in Eng. Res., vol. 136 (2017) [Google Scholar]
- P.S. Surendra, Advances in Using Nano Materials in Construction. Hong Kong Concrete Institute, Hong Kong (2017) [Google Scholar]
- M. Jafarbeglou, A.A. Ramezanianpour, Nanoscience and Nano Engineering in Concrete Advances, A Review. Int. J. of Nanoscie. and Nanotech., vol. 11, Issue 4, 263-273 (2015) [Google Scholar]
- B. Szostak, G.L. Golewski, Effect of Nano Admixture of CSH on Selected Strength Parameters of Concrete Including Fly Ash. IOP Conf. Series: Mat. Scie. and Eng., 416 (2018) [Google Scholar]
- M.-H. Zhang, J. Islam, Use of nano-silica to reduce setting time and increase early strength of concretes with high volumes of fly ash or slag. Const. and Build. Mat. (2012) [Google Scholar]
- K. Sobolev, I. Flores, L.M. Torres-Martinez, P.L. Valdez, E. Zarazua, E.L. Cuellar, Eng. of SiO2 Nanopart. for Opt. Perf.e in Nano Cement-Bas. Mat., Nanotech. in Const. 3, 139-148 (2009) [Google Scholar]
- R. Sakthivel, N. Balasundaram, Experimental investigation on behaviour of nano concrete. Int. J. of Civil Eng. and Tech., 7, Issue 2, 315-320 (2016) [Google Scholar]
- Yi Zhi Yan, Zhi Min Su, Liang Wu, Research on Mechanical Properties of NanoConcrete. Ad. Mat. Res., 628, 50-54, (2013) [Google Scholar]
- Thi My Dung Do, Thanh Quang Khai Lam, Solutions to improve the quality of mass concrete construction in climate conditions of Southern Vietnam. Int. J. of Inn. Tech. and Exp. Eng., 8, Issue 6C2, 4/2019, 188-192 (2019) [Google Scholar]
- C.Y. Li, T.W. Chou, Modeling of damage sensing in fiber composites using carbon nano-tube networks. Comp. Scie. and Tech. 68, 3373-3379 (2008) [CrossRef] [Google Scholar]
- Lam Thanh Quang Khai, Do Thi My Dung, “Stress-strain in multi-layer reinforced concrete doubly curved shell roof”. Int. J. of Inn. Tech. and Exp. Eng., 8, Issue 4S2, 3/2019, 419-424 (2019) [Google Scholar]
- Thanh Quang Khai Lam, Thi My Dung Do, Sliding between layers in 2-layer reinforced concrete beams and shell. Int. J. of Eng. and Ad. Tech., 8, Issue 5, 6/2019, 1867-1871, (2019) [Google Scholar]
- Nguyen Ngoc Long, Study the selection and design of steel fiber concrete components suitable for the use of bridge structures in Vietnam. Ministry-lev. scie. Res. Top., (2005) [Google Scholar]
- Thanh Quang Khai Lam, Thi My Dung Do, Effect of each shell thickness on deformation stress and the ability for causing the cracks in the multilayer doubly curved shell roof. Int. J. of Inn. Tech. and Exp. Eng., 8, Issue 6C2, 4/2019, 215-220 (2019) [Google Scholar]
- Thi My Dung Do, Thanh Quang Khai Lam, Analysis of Risk Problems in Construction by R software. Int. J. of Eng. and Ad. Tech., 8 (5), 6/2019, 1872-1875 (2019) [Google Scholar]
- CP 52-104-09. Reinforced concrete structure. Moscow (2009) [Google Scholar]
- TCVN 5574-2012, “Concrete and reinforced concrete, structures-Design standard”, Vietnamese standard (2012) [Google Scholar]
- ASTM C33, “Standard Specification for Concrete Aggregates” (2002) [Google Scholar]
- ACI 211.4R, “Guide for Selecting Proportions for High-Strength Concrete Using Portland Cement and Other Cementitious Materials” (2008) [Google Scholar]
- ACI 544.1R-96, “State-of-the-Art Report on Fiber Reinforced Concrete” [Google Scholar]
- ASTM A820-01, “Standard Specification for Steel Fibers for Fiber-Reinforced Concrete” [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.