Open Access
| Issue |
E3S Web Conf.
Volume 136, 2019
2019 International Conference on Building Energy Conservation, Thermal Safety and Environmental Pollution Control (ICBTE 2019)
|
|
|---|---|---|
| Article Number | 01015 | |
| Number of page(s) | 5 | |
| Section | Ultra-Low Energy Consumption Building Technology | |
| DOI | https://doi.org/10.1051/e3sconf/201913601015 | |
| Published online | 10 December 2019 | |
- Chen W, Jia Y, Yi J, et al. Effect of addition of Ni and Si on the microstructure and mechanical properties of Cu–Zn alloys. J MATER RES, 2017:1-9. [Google Scholar]
- Xia Z, Szklarska-Smialowska Z. Pitting of Admiralty Bras. Corros. Sci., 1990, 46(1):85-88. [CrossRef] [Google Scholar]
- Plewes J T,Loiacono D N.Free-cutting copper alloys contain no lead. Adv. Mater. Processes, 1991, 140(4):23-27. [Google Scholar]
- CAI W ei, RAO Ke, LI Li. Grains refinement and the microstructure and properties of H65 brass strip. Special Casting and Nonferrous Alloys, 2007, 27(9):728-730. [Google Scholar]
- Mapelli C. Venturini R. Dependence of the mechanical properties of an tl brass on the microstructural features induced by hot extrusion. Scripta Mater., 2006, 54(6): 1169-1173. [CrossRef] [Google Scholar]
- Lei Q, Li Z, Dai C, et al. Effect of aluminum on microstructure and property of Cu-Ni-Si alloys. Mater. Sci. Eng., A, 2013, 572(6):65-74. [CrossRef] [Google Scholar]
- Liu Z Y, Liang G X, Wang E D, et al. The effect of cumulative large plastic strain on the structure and properties of a Cu-Zn alloy. Mater. Sci. Eng., A (Structural Materials Properties Microstructure & Processing), 1998, 242(1-2):137-140. [CrossRef] [Google Scholar]
- Peng K, Zhang Y, Shaw L L, et al. Microstructure dependence of a Cu-38Zn alloy on processing conditions of constrained groove pressing. Acta Mater., 2009, 57(18): 5543-5553. [CrossRef] [Google Scholar]
- ASTM Standard E384-11. Standard test method for knoop and Vickers hardness of materials. West Conshohocken (PA): ASTM International; 2011. [Google Scholar]
- Dong Q, Shen L, Feng C, et al. Study of the coarsening and hardening behaviors of cocherent γ-Fe particles in Cu-2.1Fe alloy. ACTA METALL SIN (Chinese Edition), 2014, 50(10):1224-1230. [Google Scholar]
- Vitek J M, Warlimont H. The mechanism of anneal hardening in dilute copper alloys. Metall. Trans. A, 1979, 10(12):1889-1892. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.