EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 140 (2019) E3S Web Conf., 140 (2019) 05013 References
Open Access
Issue
E3S Web Conf.
Volume 140, 2019
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2019)
Article Number 05013
Number of page(s) 4
Section Engineering Nets and Equipment
DOI https://doi.org/10.1051/e3sconf/201914005013
Published online 18 December 2019
  1. Danilishin, A.M., Kozhukhov, Y.V., Simonov, A.M. Gas-dynamic designing and profiling complex for the two-element centrifugal compressor stage with 3D impeller (2019) AIP Conference Proceedings, 2141, № 030065, . [Google Scholar]
  2. Zharkovskii, A.A., Pospelov, A.Y. Use of 3D Methods for Flow Analysis, Prediction of Characteristics, and Optimization of the Shape of Settings of Hydraulic Turbines. (2015) Power Technology and Engineering, 49 (1), pp. 27-32. [CrossRef] [Google Scholar]
  3. Pospelov, A.Y., Zharkovskii, A.A. Effect of theParameters of a Computational Model on the Prediction of Hydraulic Turbine Characteristics. (2015) Power Technology and Engineering, 49 (3), pp. 159-164. 4. Neverov, V., Kozhukhov, Y., Kartashov, S., Ivanov, V. The choice of key geometric parameters in the numerical optimization of centrifugal compressor impellers. (2018) MATEC Web of Conferences, 245, № 09008. DOI: 10.1051/matecconf/201824509008 [CrossRef] [Google Scholar]
  4. Gileva, L.V., Kozhukhov, Y.V., Zuev, A.V. Improvement methods for design of turbocompressors inlet radial chambers. (2018) AIP Conference Proceedings, 2007, № 030050. DOI: 10.1063/1.5051911 [Google Scholar]
  5. Zhurkin, N., Donskoj, A., Zharkovskij, A. Numeric modeling and estimating the performance characteristics of a pneumatic driven high pressure pump. (2018) MATEC Web of Conferences, 245, # 09014. DOI: 10.1051/matecconf/201824509014. [CrossRef] [EDP Sciences] [Google Scholar]
  6. Tribunskaia, K., Kozhukhov, Y.V. Analysis ofcasing treatment’s impact on the axial compressor model stage characteristics (2017) IOP Conference Series: Materials Science and Engineering, 232 (1), № 012048. DOI: 10.1088/1757-899X/232/1/012048 [CrossRef] [Google Scholar]
  7. Aksenov, A.A., Danilishin, A.M., Dubenko, A.M., Kozhukov, Y.V. Development of the virtual experimental bench on the basis of modernized research centrifugal compressor stage test unit with the 3D impeller. (2017) IOP Conference Series: Materials Science and Engineering, 232 (1), статья № 012042. DOI: 10.1088/1757-899X/232/1/012042 [CrossRef] [Google Scholar]
  8. Danilishin, A.M., Kartashov, S.V., Kozhukhov, Y.V., Kozin, E.G. The methodology for the existing complex pneumatic systems efficiency increase with the use of mathematical modeling. (2017) IOP Conference Series: Materials Science and Engineering, 232 (1), № 012069. DOI: 10.1088/1757-899X/232/1/012069 [CrossRef] [Google Scholar]
  9. Danilishin, A.M., Kozhukhov, Y.V., Neverov, V.V., Malev, K.G., Mironov, Y.R. The task of validation of gas-dynamic characteristics of a multistage centrifugal compressor for a natural gas booster compressor station. (2017) AIP Conference Proceedings, 1876, № 020046. DOI: 10.1063/1.4998866 [Google Scholar]
  10. Danilishin, A.M., Kozhukhov, Y.V., Yun, V.K. Multi-objective optimization for impeller shroud contour, the width of vane diffuser and the number of blades of the centrifugal compressor stage based on the CFD calculation (2015). IOP Conference Series: Materials Science and Engineering, 90 (1), № 012046 .DOI: 10.1088/1757-899X/90/1/012046 [CrossRef] [Google Scholar]
  11. Kozhukhov, Y.V., Yun, V.K., Reshetnikova, L.V., Prokopovich, M.V. Numerical Investigation of Different Radial Inlet Forms for Centrifugal Compressor and Influence of the Deflectors Number by Means of Computational Fluid Dynamics Methods with Computational Model Validation. (2015) IOP Conference Series: Materials Science and Engineering, 90 (1), № 012047. DOI: 10.1088/1757-899X/90/1/012047 [Google Scholar]
  12. Guzelbaev Ya. Z. Gas-dynamic non-stationaryprocesses in a centrifugal compressor. Surge and methods of its detection.: Diss. ... Candidate of Technical Science. KSTU. Kazan, 2000 .-144 p. [Google Scholar]
  13. McKee R.J., Deffenbaugh D.M. Increased flexibilityof turbo-compressor in natural gas [Google Scholar]
  14. Izmailov R.A. Unsteady aerodynamic processes incentrifugal compressors. Diss. ... doc. LPI them. Kalinin. L., 1987 .-540 s. [Google Scholar]
  15. Izmailov R.A., Akulshin Yu.D., Krutikov T.E. Diagnostic system for the pre-surge condition of a centrifugal compressor. Turbines and compressors. 2004. No. 3, 4 (28.29) .– p. 15-22. [Google Scholar]
  16. Izmailov R.A., Nguyen Minh Hai. Automatic detection of the pre-surge condition of a centrifugal compressor. Compressor equipment and pneumatics, No. 5, 2006, M., p. 17-21. [Google Scholar]
  17. transmission though direct surge control SouthwestResearch Institute®, mechanical and Materials Engineering Division, Final report October 2001 February 2005. SwRi® Project No. 04/18/1990 DOE Award No. DE-FC26-01NT41163. -60p. [Google Scholar]
  18. Finish I. Ten lectures on wavelets. Izhevsk:Research Center “Regular and Chaotic Dynamics”, 2001, 464 pp. [Google Scholar]
  19. Dremin I.M. Wavelets and their use. Advances inphysical sciences. 2001. v. 171, No. 5, pp. 465-501. [Google Scholar]
  20. Chui C. Introduction to wavelets. Per. from English M .: Mir, 2001, -412s., Ill. 0 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.