EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 140 (2019) E3S Web Conf., 140 (2019) 06010 References
Open Access
Issue
E3S Web Conf.
Volume 140, 2019
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2019)
Article Number 06010
Number of page(s) 6
Section Fluid Mechanics
DOI https://doi.org/10.1051/e3sconf/201914006010
Published online 18 December 2019
  1. Strizhak L.Ya. Thermogasdynamic Design Fundamentals of Centrifugal Compressors of High and Ultrahigh Pressure: dissertation of the Doctor of Engineering Sciences. Saint Petersburg: St.-Petersburg State Technical University; 1995. (In Russ.) [Google Scholar]
  2. Sadovsky N.I. Increased Efficiency of Low Consumption Stages of High and Ultrahigh Centrifugal Compressors Based on the Knowledge of the Reynolds Number and Roughness Effect on Basic Processes: dissertation of the Candidate of Engineering Sciences. Saint Petersburg: St.-Petersburg State Technical University; 1994. (In Russ.) [Google Scholar]
  3. Vlasov V.M. Development of a Designing Technique for Low Consumption Stages of High Pressure Centrifugal Compressors Based on a Real Gas Viscid Flow Model: dissertation of the Candidate of Engineering Sciences. Saint Petersburg: St.-Petersburg State Technical University; 1995. (In Russ.) [Google Scholar]
  4. Izmailov R.A. Nonstationary Aerodynamic Processes in Centrifugal Compressors: dissertation of the Doctor of Engineering Sciences. Leningrad: M.I. Kalinin Leningrad Polytechnical Institute; 1989. (In Russ.) [Google Scholar]
  5. Seleznev K.P., Galerkin Yu.B. Centrifugal Compressors. Leningrad: Mashinostroenie; 1982. (In Russ.) [Google Scholar]
  6. Lebedev, A., Gileva, L., Danilishin, A., Sokolov, M. Surge protection system development in centrifugal compressor with an indicative method using numerical simulation of unsteady processes and analysis of pressure fluctuation signals. (2018) MATEC Web of Conferences, 245, paper № 09010. DOI: 10.1051/matecconf/201824509010 [CrossRef] [EDP Sciences] [Google Scholar]
  7. Ivanov, E.A., Zharkovsky, A.A., Borshchev, I.O., Svoboda, D.G. Technique for axial pump characteristics predicting in CFD package Openfoam. AIP Conference Proceedings v.2141, 030063. (2019). DOI: 10.1063/1.5122113. [Google Scholar]
  8. Zhurkin, N., Donskoj, A., Zharkovskij, A. Numeric modeling and estimating the performance characteristics of a pneumatic driven high pressure pump. (2018) MATEC Web of Conferences, 245, # 09014. DOI: 10.1051/matecconf/201824509014. [CrossRef] [EDP Sciences] [Google Scholar]
  9. V. V. Neverov, Y. V. Kozhukhov, A. M. Yablokov, A. A. Lebedev Optimization of a centrifugal compressor impeller using CFD: the choice of simulation model parameters 10th International Conference on Compressors and their Systems IOP Conf. Series: Materials Science and Engineering 232 (2017) 012037 [Google Scholar]
  10. Zharkovskii, A.A., Pospelov, A.Y. Use of 3D Methods for Flow Analysis, Prediction of Characteristics, and Optimization of the Shape of Settings of Hydraulic Turbines. (2015) Power Technology and Engineering, 49 (1), pp. 27-32. [CrossRef] [Google Scholar]
  11. Borm O, Kau H-P, Unsteady aerodynamics of a centrifugal compressor stage–validation of two different CFD solvers 2012 Proceedings of ASME Turbo Expo 2012, GT2012, Copenhagen, Denmark, June 11-15, GT2012-69636 [Google Scholar]
  12. Le Sausse P, Fabrie P, Arnou D, Clunet F 2013 CFD comparison with centrifugal compressor measurements on a wide operating range EPJ Web of Conferences, Vol. 45, p. 01059 [CrossRef] [EDP Sciences] [Google Scholar]
  13. Borm O, Balassa B, Kau H-P Comparison of different numerical approaches at the centrifugal compressor radiver 2011 ISABE Conference, International Society for Airbreathing Engines, Gothenburg, Sweden, 12th-16th September 2011 ISABE-2011-1242 [Google Scholar]
  14. M. Elfert, A. Weber, D. Wittrock, A. Peters, C. Voss, E. Nicke. Journal of turbomachinery 139(10) (2017). [Google Scholar]
  15. T. Wang, C. Peng, J. Wu. Back swept angle performance analysis of centrifugal compressor MECHANIKA. (402–406) 20(4) (2014). [Google Scholar]
  16. Pospelov, A.Y., Zharkovskii, A.A. Effect of the Parameters of a Computational Model on the Prediction of Hydraulic Turbine Characteristics. (2015) Power Technology and Engineering, 49 (3), pp. 159-164. [CrossRef] [Google Scholar]
  17. M. Elfert, A. Weber, D. Wittrock, A Peters, C. Voss, E. Nicke. Journal of turbomachinery 139(10), 101007 Doi:10.1116/1.4036357 (2017) [Google Scholar]
  18. C. Xu and R. S. Amano. Meridional Considerations of the Centrifugal Compressor Development Hindawi Publishing Corporation International Journal of Rotating Machinery 2012 ID 518381, doi:10.1155/2012/518381(2012) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.