Open Access
Issue |
E3S Web Conf.
Volume 140, 2019
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2019)
|
|
---|---|---|
Article Number | 06013 | |
Number of page(s) | 5 | |
Section | Fluid Mechanics | |
DOI | https://doi.org/10.1051/e3sconf/201914006013 | |
Published online | 18 December 2019 |
- V. A. Markov, V. G. Kamaltdinov, and S. S. Loboda, IOP Conf. Ser. Mater. Sci. Eng. 327, 022068 (2018) [Google Scholar]
- F. B. Barchenko and V. N. Bakulin, J. Eng. Phys.Thermophys. 90, (2017) [Google Scholar]
- N. S. Malastowski, F. B. Barchenko, L. V. Grekhov, and A. S. Kuleshov, Int. J. Appl. Eng. Res. 11, 11189 (2016) [Google Scholar]
- T. Natriashvili, R. Kavtaradze, and M. Glonti, in IOP Conf. Ser. Mater. Sci. Eng. (Institute of Physics Publishing, 2018) [Google Scholar]
- T. Dallmann, F. Posada, and A. Bandivadekar, Costsof Emission Reduction Technologies for DieselEngines Used in Non-Road Vehicles and Equipment(2018) [Google Scholar]
- J. C. Wurzenberger and R. Tatschl, in Combust.Engines Dev. Mix. Form. Combust. Emiss. Simul. (Springer-Verlag Berlin Heidelberg, 2012), pp. 363–384 [CrossRef] [Google Scholar]
- D. Chatterjee, T. Burkhardt, B. Bandl-Konrad, T. Braun, E. Tronconi, I. Nova, and C. Ciardelli, in SAE Tech. Pap. (SAE International, 2005) [Google Scholar]
- T. L. McKinley and A. G. Alleyne, SAE Int. J. FuelsLubr. 2, 2009 (2009) [Google Scholar]
- M. Devarakonda, G. Parker, J. H. Johnson, V. Strots, and S. Santhanam, SAE Tech. Pap. (2008) [Google Scholar]
- W. Tang, S. Wahiduzzaman, S. Wenzel, A. Leonard, and T. Morel, in SAE Tech. Pap. (SAE International, 2008) [Google Scholar]
- A. A. Cornelio, A. Shukla, S. Kouketsu, S. Nakayama, S. Hiranuma, and A. Suzuki, in SAETech. Pap. (SAE International, 2010) [Google Scholar]
- J. Barman, S. Arora, R. Khan, and M. Parashar, in SAE Tech. Pap. (2016) [Google Scholar]
- J. C. Wurzenberger and R. Wanker, in SAE Tech.Pap. (SAE International, 2005) [Google Scholar]
- P. Chen and J. Wang, Control Eng. Pract. 22, 81 (2014) [Google Scholar]
- F. Birkhold, U. Meingast, P. Wassermann, and O. Deutschmann, Appl. Catal. B Environ. 70, 119 (2007) [CrossRef] [Google Scholar]
- M. Hosoya, Y. Kawada, S. Sato, and M. Shimoda, in SAE Tech. Pap. (SAE International, 2007) [Google Scholar]
- M. Chen and S. Williams, in SAE Tech. Pap. (SAE International, 2005) [Google Scholar]
- H. Yang, V. Tsourapas, A. K. Prakash, Q. Yuan, R. Rugge, U. Mhaskar, and P. N. Rao, in SAE Tech.Pap. (SAE International, 2009) [Google Scholar]
- H. Echtle, S. Schöffel, G. Wenninger, S. Fischer, T. Lauer, and L. Möltner, MTZ Worldw. 71, 54 (2010) [CrossRef] [Google Scholar]
- M. Zöchbauer, H. Smith, and T. Lauer, in SAE Tech.Pap. (SAE International, 2015) [Google Scholar]
- Z. Abidin, K. Das, and C. Roberts, in SAE Tech.Pap. (2013) [Google Scholar]
- R. Faltsi and J. Mutyal, SAE 2006 World Congr. Exhib. 40 (2012) [Google Scholar]
- M. V. Twigg, Johnson Matthey Technol. Rev. 59, 221 (2015) [CrossRef] [Google Scholar]
- K. F. Koledina, S. N. Koledin, A. P. Karpenko, I. M. Gubaydullin, and M. K. Vovdenko, J. Math. Chem. 57, 484 (2019) [Google Scholar]
- D. Upadhyay and M. Van Nieuwstadt, in ASME Int.Mech. Eng. Congr. Expo. Proc. (2002), pp. 707–713 [Google Scholar]
- H. Na, D. Reed, A. Annaswamy, P. M. Laing, and I. Kolmanovsky, in SAE Tech. Pap. (2011) [Google Scholar]
- I. V. Derevich, V. S. Ermolaev, V. Z. Mordkovich, and D. D. Galdina, Theor. Found. Chem. Eng. 46, 8 (2012) [CrossRef] [Google Scholar]
- R. Perry, Chemical Engineering Handbook, Manual(2007) [Google Scholar]
- L. F. Shampine and M. W. Reichelt, SIAM J. Sci.Comput. 18, 1 (1997) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.