EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 156 (2020) E3S Web Conf., 156 (2020) 05028 References
Open Access
Issue
E3S Web Conf.
Volume 156, 2020
4th International Conference on Earthquake Engineering & Disaster Mitigation (ICEEDM 2019)
Article Number 05028
Number of page(s) 6
Section Structure
DOI https://doi.org/10.1051/e3sconf/202015605028
Published online 02 April 2020
  1. R. P. Dhakal and K. Maekawa, “Reinforcement stability and fracture of cover concrete in reinforced concrete members,” Journal of Structural Engineering, 128, no. 10, 1253–1262, (2002). [CrossRef] [Google Scholar]
  2. S. J. Foster, “On behavior of high-strength concrete columns: cover spalling, steel fibers, and ductility,” Structural Journal, 98, no. 4, 583–589, (2001). [Google Scholar]
  3. S. J. Foster, “The application of steel-fibres as concrete reinforcement in Australia: from material to structure,” Materials and Structures, 42, no. 9, 1209, (2009). [Google Scholar]
  4. S. J. Foster, J. Liu, and S. A. Sheikh, “Cover spalling in HSC columns loaded in concentric compression,” Journal of Structural Engineering, 124, no. 12, 1431–1437, 1998. [CrossRef] [Google Scholar]
  5. S.-C. Lee, J.-H. Oh, and J.-Y. Cho, “Compressive behavior of fiber-reinforced concrete with end- hooked steel fibers,” Materials, 8, no. 4, 1442–1458, (2015). [CrossRef] [Google Scholar]
  6. M. Attard and S. Setunge, “Stress-strain relationship of confined and unconfined concrete,” ACI Materials Journal, 93, no. 5, (1996). [Google Scholar]
  7. B. Piscesa, M. Attard, A. Samani, and S. Tangaramvong, “Plasticity Constitutive Model for Stress-Strain Relationship of Confined Concrete,” ACI Structural Journal, 114, no. 2, 361, (2017). [Google Scholar]
  8. A. Samani and M. Attard, “A Stress-Strain Model for Uniaxial and Confined Concrete under Compression,” Engineering Structures, vol. 41, pp. 335–349,August 2012, doi: http://dx.doi.org/10.1016/j.engstruct.2012.03.027. [Google Scholar]
  9. R. Dhakal, C. Wang, and J. Mander, “Behavior of steel fibre reinforced concrete in compression,” (2005). [Google Scholar]
  10. T. Blaszczynski and M. Przybylska-Falek, “Steel fibre reinforced concrete as a structural material,” Procedia Engineering, 122, 282–289, (2015). [Google Scholar]
  11. R. D. Neves and J. F. De Almeida, “Compressive behaviour of steel fibre reinforced concrete,” Structural Concrete, 6, no. 1, 1–8, (2005). [CrossRef] [Google Scholar]
  12. K. Marara, O. Erenb, and i. Yitmena, “Compression specific toughness of normal strength steel fiber reinforced concrete (NSSFRC) and high strength steel fiber reinforced concrete (HSSFRC),” Materials Research, 14, no. 2, 239–247, (2011). [CrossRef] [Google Scholar]
  13. M. Nataraja, N. Dhang, and A. Gupta, “Stress-strain curves for steel-fiber reinforced concrete under compression,” Cement and concrete composites, 21, no. 5–6, 383–390, (1999). [CrossRef] [Google Scholar]
  14. P. Soroushian and Z. Bayasi, “Fiber type effects on the performance of steel fiber reinforced concrete,” Materials Journal, 88, no. 2, 129–134, (1991). [Google Scholar]
  15. D. A. Fanella and A. E. Naaman, “Stress-strain properties of fiber reinforced mortar in compression,” in Journal Proceedings, 82, no. 4, 475–483, (1985). [Google Scholar]
  16. B. Piscesa, M. Attard, P. Suprobo, and A. Samani, “Investigation on the fiber based approach to estimate the axial load carrying capacity of the circular concrete filled steel tube (CFST),” in IOP Conference Series: Materials Science and Engineering, 267, no. 1: IOP Publishing, 012017, (2017). [CrossRef] [Google Scholar]
  17. B. Piscesa, M. M. Attard, D. Prasetya, and A. K. Samani, “Modeling cover spalling behavior in high strength reinforced concrete columns using a plasticity-fracture model,” Engineering Structures, 196, 109336, (2019). [Google Scholar]
  18. A. Committee, and I. O. f. Standardization, “Building code requirements for structural concrete (ACI 31814) and commentary.” [Google Scholar]
  19. B. Piscesa, M. M. Attard, and A. K. Samani, “A lateral strain plasticity model for FRP confined concrete,” Composite Structures, 158, 160–174, (2016). [Google Scholar]
  20. A. K. Samani and M. M. Attard, “Lateral Strain Model for Concrete under Compression,” ACI Structural Journal, 111, no. 1–6, (2014). [Google Scholar]
  21. B. Piscesa, “Modeling confined concrete using plasticity formulation,” PhD. Thesis, School of Civil and Environmental Engineering, The University of New South Wales, Sydney, Australia, (2018). [Google Scholar]
  22. B. Piscesa, M. M. Attard, and A. K. Samani, “3D Finite element modeling of circular reinforced concrete columns confined with FRP using a plasticity based formulation,” Composite Structures, 194, 478–493, (2018). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.