Open Access
Issue
E3S Web Conf.
Volume 158, 2020
2019 7th International Conference on Environment Pollution and Prevention (ICEPP 2019)
Article Number 03005
Number of page(s) 6
Section Low Carbon and Emission Reduction
DOI https://doi.org/10.1051/e3sconf/202015803005
Published online 23 March 2020
  1. B. Wicke, R. Sikkema, V. Dornburg and A. Faaij, “Exploring land use changes and the role of palm oil production in Indonesia and Malaysia,” Land Use Policy, 28, 193-206, (2011). [CrossRef] [Google Scholar]
  2. S.B. Hansen, R. Padfield, K. Syayuti, S. Evers, Z. Zakkariah and S. Mastura, “Trends in global palm oil sustainability research,” Journal of Cleaner Production, 100, 140-149,( 2015). [CrossRef] [Google Scholar]
  3. K.H. Mo, U.J. Alengaram and M.Z. Jumaat, “A review on the use of agriculture waste material as lightweight aggregate for reinforced concrete structural members,” Advances in Materials Science and Engineering, (2014). [Google Scholar]
  4. Y.L. Chiew and S. Shimada, “Current state and environmental impact assessment for utilizing oil palm empty fruit bunches for fuel, fiber and fertilizer - A case study of Malaysia,” Biomass and Bioenergy, 51, 109-124, (2013). [CrossRef] [Google Scholar]
  5. E. Olanipekun, K. Olusola and O. Ata, “A compartative study of concrete properties using coconut shell and palm kernel shell as coarse aggregates,” Building and Environment, 41, 297-301, 2006. [CrossRef] [Google Scholar]
  6. B.S. Thomas, S. Kumar and H.S. Arel, “Sustainable concrete containing palm oil fuel ash as a supplementary cementitious material - A review,” Renewable and Sustainable Energy Reviews, 80, 550-561, (2017). [CrossRef] [Google Scholar]
  7. M.F. Awalludin, O. Sulaiman, R. Hashim and W.N.A.W Nadhari, “An overview of the oil palm industry in Malaysia and its waste utilization through thermochemical conversion, specifically vi liquefaction,” Renewable and Sustainable Energy Reviews, 50, 1469-1484, ( 2015). [CrossRef] [Google Scholar]
  8. M. Gatto, M. Wollni and M. Qaim, “Oil palm boom and land-use dynamics in Indonesia: The role of policies and socioeconomic factors,” Land Use Policy, 46, 292-303, (2015). [CrossRef] [Google Scholar]
  9. O. Sulaiman, N. Salim, N.A. Nordin, R. Hashim, M. Ibrahim and M. Sato, “The potential of oil palm trunk biomass as an alternative source for compressed wood,” BioResources, 7, 2688-2706, (2012). [CrossRef] [Google Scholar]
  10. H.M. Hamada, G.A. Jokhio, F.M. Yahaya, A.M. Humada and Y. Gul, “The present state of the use of Palm Oil Fuel Ash (POFA) in concrete,” Construction and Building Materials, 175, 26-40, (2018). [CrossRef] [Google Scholar]
  11. H. Abdel-Gawwad and S. Abo-El-Enien, “A novel method to produce dry geopolymer cement powder,” HBRC Jouranal, 12, 13-24, (2016). [CrossRef] [Google Scholar]
  12. E. Worrell, L. Price, N. Martin, C. Hendriks and L.O. Meida, “Carbon dioxide emissions from the global cement industry,” Annual Review of Energy and the Environment, 26, 303-329, (2001). [CrossRef] [Google Scholar]
  13. M.N. Fardis, “Innovative materials and techniques in concrete construction,” in ACES Workshop, Springer Science & Business Media, (2011). [Google Scholar]
  14. W. Tangchirapat, C. Jaturapitakkul and P. Chidaprasirt, “Use of palm oil fuel ash as a supplementary cementitious material for producing high-strength concrete,” Construction and Building Materials, 23, 2641-2646, (2009). [CrossRef] [Google Scholar]
  15. V. Sata, C. Jaturapitakkul and K. Kiattikomol, “Utilization of palm oil fuel ash in high-strength concrete,” Journal of Materials in Civil Engineering, 16, 623-628, (2004). [CrossRef] [Google Scholar]
  16. H.M. Hamada, G.A. Jokhio, F.M. Yahaya and A.M. Humada, “Properties of fresh and hardened sustainable concrete due to the use of palm oil fuel ash as cement replacement,” in IOP Conference Series: Materials Science and Engineering,( 2018). [Google Scholar]
  17. A.A. Awal and M.W. Hussin, “The effectiveness of palm oil fuel ash in preventing expansion due to alkali-silica reaction,” Cement and Concrete Composites, 19, 367-372,( 1997). [CrossRef] [Google Scholar]
  18. H.M. Hamada, F.M. Yahaya, K. Muthusamy, G.A. Jokhio and A.M. Humada, “Fresh and hardened properties of palm oil clinker lightweight aggregate concrete incorporating Nano-palm oil fuel ash,” Construction and Building Materials, 214, 344-354, (2019). [CrossRef] [Google Scholar]
  19. M.A.A. Rajak, Z.A. Majid and M. Ismail, “Morphological characteristics of hardened cement pastes incorporating nano-palm oil fuel ash,” Procedia Manufacturing, 2, 512-518,( 2015). [CrossRef] [Google Scholar]
  20. H.M. Hamada, G.A. Jokhio, F.M. Yahaya and A.M. Humada, “Applications of nano palm oil fuel ash and nano fly ash in concrete,” IOP Conference series: Materials Science and Engineering, 342, no.1, p. 012068,( 2018). [CrossRef] [Google Scholar]
  21. M. Safiuddin, M. Abdus Salam and M.Z. Jumaat, “Utilization of palm oil fuel ash in concrete: a review,” Journal of Civil Engineering and Management, 17, 234-247, (2011). [CrossRef] [Google Scholar]
  22. A.A. Awal and M.W. Hussin, “Effect of palm oil fuel ash in controlling heat of hydration of concrete,” Procedia Engineering, 14, 2650-2657, (2011). [CrossRef] [Google Scholar]
  23. S. Bamaga, M.A. Ismail, Z. Majid, M. Ismail and M. Hussin, “Evaluation of sulfate resistance of mortar containing palm oil fuel ash from different sources,” Arabian Journal of Science and Engineering, 38, 2293-2301,( 2013). [CrossRef] [Google Scholar]
  24. X.Y. Wang and H.S. Lee, “Modeling the hydration of concrete incorporating fly ash or slag,” Cement and Concret Research, 40, 984-996, (2010). [CrossRef] [Google Scholar]
  25. N.H.A.S Lim, M.A. Ismail, H.S. Lee, M.W. Hussin, A.R.M. Sam and M. Samadi, “The effects of high volume nano palm oil fuel ash on microstructure properties and hydration temperature of mortar,” Construction and Building Materials, 93, 29-34,( 2015). [CrossRef] [Google Scholar]
  26. J.H. Tay, “Ash from oil-palm waste as a concrete material,” Journal of Materials in Civil Engineering, 2, 94-105,( 1990). [CrossRef] [Google Scholar]
  27. S. Tongaroonsri and S. Tangtermsirikul, “Effect of mineral admixtures and curing periods on shrinkage and cracking age under restrained condition,” Construction and Building Materials, 23, 1050-1056, (2009). [CrossRef] [Google Scholar]
  28. A. Itim, K. Ezziane and E.H. Kadri, “Compressive strength and shrinkage of mortar containing various amounts of mineral additions,” Construction and Building Materials, 25, 3603-3609, (2011). [CrossRef] [Google Scholar]
  29. N. Farzadnia, H. Noorvand, A.M. Yasin and F.N.A. Aziz, “The effect of nano silica on short term drying shrinkage of POFA cement mortars,” Construction and Building Materials, 95,636-646,( 2015). [CrossRef] [Google Scholar]
  30. N.M. Altawir, M.M. Johari and S.S. Hashim, “Flexural performance of green engineered cementitious composites containing high volume of palm oil fuel ash,” Construction and Building Materials, 37, 518-525, (2012). [CrossRef] [Google Scholar]
  31. N. Ranjbar, M. Mehrali, A. Behnia, U.J. Alengaram and M.Z. Jumaat, “Compressive strength and microstructural analysis of fly ash/palm oil fuel ash based geopolymer mortar,” Materials & Design, 59, no.2014, 532-539, (2014). [CrossRef] [Google Scholar]
  32. T. Deepak, A. Elsayed, N. Hassan, N. Chakravarthy, S.Y. Tong and B. Mithun, “Investigation on properties of concrete with palm oil fuel ash as cement replacement,” International Journal of Scientific & Technology Research, 3, 138-142,( 2014). [Google Scholar]
  33. A.A. Awal and I. Shehu, “Evaluation of heat of hydration of concrete containing high volume palm oil fuel ash,” Fuel, 105, 728-731, (2013). [CrossRef] [Google Scholar]
  34. D. Lin, K. Lin, W. Chang, H. Luo and M. Cai, “Improvements of nano-SiO2 on sludge/fly ash mortar,” Waste Management, 28, 1081-1087, (2008). [CrossRef] [Google Scholar]
  35. K. Lin, W. Chang, D. Lin, H. Luo and M. Tsai, “Effects of nano-SiO2 and different ash particle sizes on sludge ash-cement mortar,” Journal of Environment Management, 88, 708-714, (2008). [CrossRef] [Google Scholar]
  36. M.M. Khotbehsara, E. Mohseni, M.A. Yazdi, P. Sarker and M.M. Ranjbar, “Effect of nano-CuO and fly ash on the properties of self-compacting mortar,” Construction and Building Materials, 94, 758-766, (2015). [CrossRef] [Google Scholar]
  37. M. Sumesh , U.J. Alengaram, M.Z. Jumaat, K.H. Mo and M.F. Alnahhal, “Incorporation of nano-materials in cement composite and geopolymer based paste and mortar - A review,” Construction and Building Materials, 148, 62-84,( 2017). [CrossRef] [Google Scholar]
  38. M.W. Hussin, N.H.A.S Lim, A.R.M. Sam, M.A. Ismail, M. Samadi and N.F. Ariffin, “Long term studies on compressive strength of high volume ultrafine palm oil fuel ash mortar mixes”. [Google Scholar]
  39. M.M. Johari, A. Zeyad, N.M. Bunnori and K. Ariffin, “Engineering and transport properties of high strength green concrete containing high volume of ultrafine palm oil fuel ash,” Construction and Building Materials, 30, 281-288, (2012). [CrossRef] [Google Scholar]
  40. A.M. Zayed, M.A.M. Johari, B.A. Tayeh and M.O. Yusuf, “Pozzolanic reactivity of ultrafine palm oil fuel ash waste on strength and durability performances of high strength concrete,” Journal of Cleaner Production, 144, 511-522, (2017). [CrossRef] [Google Scholar]
  41. J. Zhang, C. Shi, Z. Zhang and Z. Ou, “Durability of alkali-activated materials in aggressive environments: A review on recent studies,” Construction and Building Materials, 152, 598-613, (2017). [CrossRef] [Google Scholar]
  42. S.A. Bernal and J.L. Provis, “Durability of alkali-activated materials: progress and prespectives,” Journal of the American Ceramic Society, 97, 997-1008, (2014). [CrossRef] [Google Scholar]
  43. M. Hossain, M. Karim, M. Hossain, M. Islam and M.F.M. Zain, “Durability of mortar and concrete containing alkali activated binder with pozzolans: A review,” Construction and Building Materials, 93, 95-109, (2015). [CrossRef] [Google Scholar]
  44. F. Pacheco-Torgal, J. Castro-Gomes and S. Jalali, “Alkali-activated binders: A review: Part 1. Historic background, terminology, reaction mechanisms and hydration products,” Construction and Building Materials, 22, 1305-1314, (2008). [CrossRef] [Google Scholar]
  45. M.W. Hussin and A.A. Awal, “Influence of palm oil fuel ash on sulfate resistance of mortar and concrete,” Special Publication, 178, 417-430, (1998). [Google Scholar]
  46. M. Aldahdooh, N.M. Bunnori and M.M. Johari, “Development of green ultra-high performance fiber reinforced concrete containing ultrafine palm oil fuel ash,” Construction and Building Materials, 48, 379-389, (2013). [CrossRef] [Google Scholar]
  47. W. Tangchirapat, T. Saeting, C. Jaturapitakkul, K. Kiattikomol and A. Siripanichgorn, “Use of waste ash from palm oil industry in concrete,” Waste Management, 27, 81-88, (2007). [CrossRef] [Google Scholar]
  48. C. Jaturapitakkul, K. Kiattikomol, W. Tangchirapat and T. Saeting, “Evaluation of the sulfate resistance of concrete containing palm oil fuel ash,” Construction and Building Materials, 21, 1399-1405, (2007). [Google Scholar]
  49. B.A. Salami, M.A.M. Johari, Z.A. Ahmad and M. Maslehuddin, “Durability performance of palm oil fuel ash based engineered alkaline-activated cementitious composite (POFA-EACC) mortar in sulfate environment,” Construction and Building Materials, 131, 229-244, (2017). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.