Scientific and methodological bases of rational design of hoisting-and-transport machines metal structures

Yurii Sagirov; Viktor Artiukh; Vladlen Mazur; Maxim Aleksandrovskiy

doi:10.1051/e3sconf/202016403005

All issues

Volume 164 (2020)

E3S Web Conf., 164 (2020) 03005

References

Open Access

Issue		E3S Web Conf. Volume 164, 2020 Topical Problems of Green Architecture, Civil and Environmental Engineering 2019 (TPACEE 2019)


Article Number		03005
Number of page(s)		22
Section		Energy Efficiency in Transportation
DOI		https://doi.org/10.1051/e3sconf/202016403005
Published online		05 May 2020

Y. Sahirov, V. Artiukh, V. Mazur, N. Vaynshtok, I. Reshetnikova, E3S Web of Conferences 110, 01049 (2019). DOI: https://doi.org/10.1051/e3sconf/201911001049 [CrossRef] [EDP Sciences] [Google Scholar]
V. Kukhar, N. Yelistratova, V. Burko, Y. Nizhelska, O.Aksionova, International Journal of Engineering & Technology (UAE) 7(2.23), 216–220 (2018). DOI: https://doi.org/10.14419/ijet.v7i2.23.11922 [CrossRef] [Google Scholar]
V. Artiukh, V. Mazur, S. Kargin, L. Zakharova, MATEC Web of Conferences 170, 03028 (2018). DOI: https://doi.org/10.1051/ matecconf/201817003028 [CrossRef] [EDP Sciences] [Google Scholar]
D.B. Efremov, A.A. Gerasimova, S.M. Gorbatyuk, N.A. Chichenev, CIS Iron and Steel Review 18, 30–34 (2019) [CrossRef] [Google Scholar]
A.L. Sotnikov, V.N. Kireev, A.Yu. Orobtsev, et al., Steel in Translation 43 (12), 808–814 (2013) [CrossRef] [Google Scholar]
K.N. Solomonov. Materials Science Forum.704–705, 434–439 (2012) [Google Scholar]
D.A. Kitaeva, S.T. Pazylov, Y.I. Rudaev. Journal of Applied Mechanics and Technical Physics 57 (2), 352–358 (2016) [CrossRef] [Google Scholar]
V. Kukhar, V. Artiukh, A. Prysiazhnyi, A. Pustovgar, E3S Web of Conferences 33, 02031 (2018). DOI: https://doi.org/10.1051/e3sconf/20183302031 [CrossRef] [EDP Sciences] [Google Scholar]
A.L. Sotnikov, N.A. Rodionov, S.V. Ptukha. Analysis Of Mechanical Loading of the Hinges and Supports of the Mold Vibration Mechanism on a Continuous Caster. Metallurgist, V.58, Issue 9, pp.883–891 (2015) [Google Scholar]
Nabeel S. Gharaibeh, Mohammed I. Matarneh, V.G. Artyukh, Research Journal of Applied Sciences, Engineering and Technology 8(12), 1461–1464 (2014) [CrossRef] [Google Scholar]
V. Artiukh, V. Mazur, A. Butyrin, Advances in Intelligent Systems and Computing, 692, 212-219 (2018).. DOI: https://doi.org/10.1007/978-3-319-70987-1_23 [CrossRef] [Google Scholar]
J. Fu, H. Li, L. Gao, M. Xiao, Computers & Structures 212,.162–172 (2019). DOI: https://doi.org/10.1016/j.compstruc.2018.10.006 [Google Scholar]
V. Mazur, V. Artiukh, Yu. Sagirov, S. Kuznezov, MATEC Web of Conferences 239, 01042 (2018). DOI: https://doi.org/10.1051/matecconf/201823901042 [CrossRef] [EDP Sciences] [Google Scholar]
M.P. Bendsøe, O. Sigmund, Topology optimization – theory, methods and applications (Berlin Heidelberg, Springer-Verlag, 2004). [Google Scholar]
S. Boyd, Foundations and Trends® in Machine Learning 3 (1), 1–122 (2010). DOI: https://doi.org/10.1561/2200000016 [CrossRef] [Google Scholar]
S. Deng, Structural and Multidisciplinary Optimization 51 (5), 987–1001 (2015). DOI: https://doi.org/10.1007/s00158-014-1188-6 [CrossRef] [Google Scholar]
Junjian Fu, Hao Li, Liang Gao, Mi Xiao, Computers & Structures 212, 162–172 (2019). DOI: https:// doi.org/10.1016/j.compstruc.2018.10.006 [Google Scholar]
D.E. Grierson, S. Khajehpour, Recent advances in optimal structural design ASCE, 81–96 (2002) [Google Scholar]
Zijun Wu, Liang Xia, Shuting Wang, Tielin Shi, Computer Methods in Applied Mechanics and Engineering 345, 345–602 (2018). DOI: https://doi.org/10.1016/j.cma.2018.11.003 [Google Scholar]
T. Wohlers, Wohlers report 2014: Additive manufacturing and 3D-printing state of the industry: Annual world-wide progress report (Wohlers Associates, 2014) [Google Scholar]
5 things every manufacturer needs to know about 3d printing [electronic resource]. - Available at: https://www.aem.org/news/february-2018/5-things-every-manufacturer-needs-to-know-about-3d-printing/ [Google Scholar]
Caterpillar opens 3D Printing & Innovation Accelerator at Illinois HQ [electronic resource]. - Available at: https://identify3d.com/blog/caterpillar-opens-3d-printing-innovation-accelerator-at-illinois-hq/ [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] Y. Sahirov, V. Artiukh, V. Mazur, N. Vaynshtok, I. Reshetnikova, E3S Web of Conferences 110, 01049 (2019). DOI: https://doi.org/10.1051/e3sconf/201911001049 [CrossRef] [EDP Sciences] [Google Scholar]

[2] V. Kukhar, N. Yelistratova, V. Burko, Y. Nizhelska, O.Aksionova, International Journal of Engineering & Technology (UAE) 7(2.23), 216–220 (2018). DOI: https://doi.org/10.14419/ijet.v7i2.23.11922 [CrossRef] [Google Scholar]

[3] V. Artiukh, V. Mazur, S. Kargin, L. Zakharova, MATEC Web of Conferences 170, 03028 (2018). DOI: https://doi.org/10.1051/ matecconf/201817003028 [CrossRef] [EDP Sciences] [Google Scholar]

[4] D.B. Efremov, A.A. Gerasimova, S.M. Gorbatyuk, N.A. Chichenev, CIS Iron and Steel Review 18, 30–34 (2019) [CrossRef] [Google Scholar]

[5] A.L. Sotnikov, V.N. Kireev, A.Yu. Orobtsev, et al., Steel in Translation 43 (12), 808–814 (2013) [CrossRef] [Google Scholar]

[6] K.N. Solomonov. Materials Science Forum.704–705, 434–439 (2012) [Google Scholar]

[7] D.A. Kitaeva, S.T. Pazylov, Y.I. Rudaev. Journal of Applied Mechanics and Technical Physics 57 (2), 352–358 (2016) [CrossRef] [Google Scholar]

[8] V. Kukhar, V. Artiukh, A. Prysiazhnyi, A. Pustovgar, E3S Web of Conferences 33, 02031 (2018). DOI: https://doi.org/10.1051/e3sconf/20183302031 [CrossRef] [EDP Sciences] [Google Scholar]

[9] A.L. Sotnikov, N.A. Rodionov, S.V. Ptukha. Analysis Of Mechanical Loading of the Hinges and Supports of the Mold Vibration Mechanism on a Continuous Caster. Metallurgist, V.58, Issue 9, pp.883–891 (2015) [Google Scholar]

[10] Nabeel S. Gharaibeh, Mohammed I. Matarneh, V.G. Artyukh, Research Journal of Applied Sciences, Engineering and Technology 8(12), 1461–1464 (2014) [CrossRef] [Google Scholar]

[11] V. Artiukh, V. Mazur, A. Butyrin, Advances in Intelligent Systems and Computing, 692, 212-219 (2018).. DOI: https://doi.org/10.1007/978-3-319-70987-1_23 [CrossRef] [Google Scholar]

[12] J. Fu, H. Li, L. Gao, M. Xiao, Computers & Structures 212,.162–172 (2019). DOI: https://doi.org/10.1016/j.compstruc.2018.10.006 [Google Scholar]

[13] V. Mazur, V. Artiukh, Yu. Sagirov, S. Kuznezov, MATEC Web of Conferences 239, 01042 (2018). DOI: https://doi.org/10.1051/matecconf/201823901042 [CrossRef] [EDP Sciences] [Google Scholar]

[14] M.P. Bendsøe, O. Sigmund, Topology optimization – theory, methods and applications (Berlin Heidelberg, Springer-Verlag, 2004). [Google Scholar]

[15] S. Boyd, Foundations and Trends® in Machine Learning 3 (1), 1–122 (2010). DOI: https://doi.org/10.1561/2200000016 [CrossRef] [Google Scholar]

[16] S. Deng, Structural and Multidisciplinary Optimization 51 (5), 987–1001 (2015). DOI: https://doi.org/10.1007/s00158-014-1188-6 [CrossRef] [Google Scholar]

[17] Junjian Fu, Hao Li, Liang Gao, Mi Xiao, Computers & Structures 212, 162–172 (2019). DOI: https:// doi.org/10.1016/j.compstruc.2018.10.006 [Google Scholar]

[18] D.E. Grierson, S. Khajehpour, Recent advances in optimal structural design ASCE, 81–96 (2002) [Google Scholar]

[19] Zijun Wu, Liang Xia, Shuting Wang, Tielin Shi, Computer Methods in Applied Mechanics and Engineering 345, 345–602 (2018). DOI: https://doi.org/10.1016/j.cma.2018.11.003 [Google Scholar]

[20] T. Wohlers, Wohlers report 2014: Additive manufacturing and 3D-printing state of the industry: Annual world-wide progress report (Wohlers Associates, 2014) [Google Scholar]

[21] 5 things every manufacturer needs to know about 3d printing [electronic resource]. - Available at: https://www.aem.org/news/february-2018/5-things-every-manufacturer-needs-to-know-about-3d-printing/ [Google Scholar]

[22] Caterpillar opens 3D Printing & Innovation Accelerator at Illinois HQ [electronic resource]. - Available at: https://identify3d.com/blog/caterpillar-opens-3d-printing-innovation-accelerator-at-illinois-hq/ [Google Scholar]