Open Access
Issue
E3S Web Conf.
Volume 172, 2020
12th Nordic Symposium on Building Physics (NSB 2020)
Article Number 14007
Number of page(s) 7
Section Material properties measurement
DOI https://doi.org/10.1051/e3sconf/202017214007
Published online 30 June 2020
  1. R. Brandner, G. Flatscher, A. Ringhofer, G. Schickhofer, and A. Thiel, Eur. J. Wood Wood Prod. 74, 331 (2016) [CrossRef] [Google Scholar]
  2. R. Lepage, Moisture Response of Wall Assemblies of Cross-Laminated Timber Construction in Cold Canadian Climates, University of Waterloo, 2012 [Google Scholar]
  3. E. L. Schmidt, M. Riggio, A. R. Barbosa, and I. Mugabo, Build. Environ. 148, 609 (2019) [Google Scholar]
  4. A. Tietze, S. Ott, S. Boulet, K. Gradeci, N. Labonnote, S. Grynning, J. Noreen, and Pousette Anna, Tall Timber Facades - Identification of Coss-Effective and Resilient Envelopes for Wood Constructions (TallFacades) (2017) [Google Scholar]
  5. H. Viitanen, Mater. Struct. 27, 483 (1994) [Google Scholar]
  6. P. Johansson, G. Bok, and A. Ekstrand-Tobin, Build. Environ. 65, 178 (2013) [Google Scholar]
  7. K. Krabbenhoft and L. Damkilde, Wood Sci. Technol. 38, 641 (2004) [Google Scholar]
  8. J. Johansson and G. Kifetew, Eur. J. Wood Wood Prod. 68, 77 (2010) [CrossRef] [Google Scholar]
  9. P. Niemz and D. Mannes, J. Cult. Herit. 13, S26 (2012) [Google Scholar]
  10. P. Perré, Dry. Technol. 29, 1529 (2011) [CrossRef] [Google Scholar]
  11. M. C. Phillipson, P. H. Baker, M. Davies, Z. Ye, A. McNaughtan, G. H. Galbraith, and R. C. McLean, Build. Serv. Eng. Res. Technol. 28, 303 (2007) [Google Scholar]
  12. NF EN 13183-1, Moisture Content of a Piece of Sawn Timber - Part 1: Determination by Oven Dry Method (2002) [Google Scholar]
  13. M. de Meijer and H. Militz, Holz Als Roh-Werkst. 58, 354 (2000) [CrossRef] [Google Scholar]
  14. NF EN 13183-2, Moisture Content of a Piece of Sawn Timber - Part 2: Estimation by Electrical Resistance Method (2002) [Google Scholar]
  15. M. Tiitta and H. Olkkonen, Rev. Sci. Instrum. 73, 3093 (2002) [Google Scholar]
  16. S. Hameury and M. Sterley, Wood Mater. Sci. Eng. 1, 116 (2006) [Google Scholar]
  17. L. Passarini, C. Malveau, and R. E. Hernández, Wood Sci. Technol. 49, 1251 (2015) [Google Scholar]
  18. Ö. Gezici-Koç, S. J. F. Erich, H. P. Huinink, L. G. J. van der Ven, and O. C. G. Adan, Cellulose 24, 535 (2017) [Google Scholar]
  19. G. Almeida, S. Gagné, and R. E. Hernández, Wood Sci. Technol. 41, 293 (2007) [Google Scholar]
  20. M. Zhou, S. Caré, D. Courtier-Murias, P. Faure, S. Rodts, and P. Coussot, Wood Sci. Technol. 52, 929 (2018) [Google Scholar]
  21. D. Derome, S. Roels, and J. Carmeliet, 9 (2005) [Google Scholar]
  22. S. Roels and J. Carmeliet, Int. J. Heat Mass Transf. 49, 4762 (2006) [Google Scholar]
  23. M. Sedighi-Gilani, M. Griffa, D. Mannes, E. Lehmann, J. Carmeliet, and D. Derome, Int. J. Heat Mass Transf. 55, 6211 (2012) [Google Scholar]
  24. K. Watanabe, Y. Saito, S. Avramidis, and S. Shida, Dry. Technol. 26, 590 (2008) [CrossRef] [Google Scholar]
  25. E. Badel and P. Perré, Ann. For. Sci. 59, 767 (2002) [EDP Sciences] [Google Scholar]
  26. B. J. Pease, G. A. Scheffler, and H. Janssen, Constr. Build. Mater. 36, 419 (2012) [Google Scholar]
  27. A. Bouali, R. Rémond, G. Almeida, and P. Perré, in (Xiamen, China, 2012) [Google Scholar]
  28. K. Sandberg and J.-G. Salin, Wood Sci. Technol. 46, 207 (2012) [Google Scholar]
  29. G. Almeida, S. Leclerc, and P. Perre, Int. J. Multiph. Flow 34, 312 (2008) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.