Open Access
Issue |
E3S Web Conf.
Volume 172, 2020
12th Nordic Symposium on Building Physics (NSB 2020)
|
|
---|---|---|
Article Number | 19005 | |
Number of page(s) | 7 | |
Section | Architectural aspects | |
DOI | https://doi.org/10.1051/e3sconf/202017219005 | |
Published online | 30 June 2020 |
- M. G. Institute, Reinventing construction: a route to higher productivity (2017) [Google Scholar]
- PTPC, Estudo prospetivo setorial e identificação de áreas prioritárias, oportunidades e orientações estratégicas para as PME do setor AEC da região norte (2019) [Google Scholar]
- T. Haupt, N. Harinarain, Acta Structilia 23, 79-108 (2017) [CrossRef] [Google Scholar]
- Eurostat, Production in construction - annual data, https://appsso.eurostat.ec.europa.eu/nui/show.do?dataset=sts_copr_a&lang=en (accessed 23 December 2019) [Google Scholar]
- ECTP, Strategic research & innovation agenda for 2021-2027 (2019) [Google Scholar]
- PTPC, Plano estratégico da inovação e competitividade 2030 para o setor AEC (2018) [Google Scholar]
- R. Maskuriy, A. Selamat, K. N. Ali, P. Maresova, O. Krejcar, Applied Sciences 9, 2819 (2019) [CrossRef] [Google Scholar]
- P. Nowotarski, J. Paslawski, IOP Conference Series: Materials Science and Engineering 245, 1-10 (2017) [Google Scholar]
- L. Monostori, CIRP Encyclopedia of Production Engineering (2018) [Google Scholar]
- F. R. Correa, IEEE Industrial Cyber-Physical Systems 392-397 (2018) [Google Scholar]
- W. S. Alaloul, M. S. Liew, N. A. W. A. Zawawi, I. B. Kennedy, Ain Shams Engineering Journal (2019) [Google Scholar]
- M. Niemelä, A. Shi, S. Shirowzhan, S. M. E. Sepasgozar, C. Liu, International Symposium on Automation and Robotics in Construction 1298-1304 (2019) [Google Scholar]
- C. AEC, Portugal e o futuro da política de coesão (2018) [Google Scholar]
- W. E. Forum, Shaping the future of construction: a breakthrough in mindset and technology (2016) [Google Scholar]
- M. Jia, A. Komeily, Y. Wang, R. S. Srinivasan, Autom. Constr. 101, 111-126 (2019) [CrossRef] [Google Scholar]
- D. Zhong, H. Lv, J. Han, Q. Wei, Sensors 14, 13794-13814 (2014) [CrossRef] [Google Scholar]
- N. Garyaev, V. Garyaeva, E3S Web of Conferences 97, 1-6 (2019) [CrossRef] [EDP Sciences] [Google Scholar]
- H. Alaka, L. Oyedele, H. Owolabi, O. Akinade, M. Bilal, S. Ajayi, IEEE Transactions on Engineering Management 66, 689-698 (2019) [Google Scholar]
- M. Bilal, L. O. Oyedele, J. Qadir, K. Munir, S. O. Ajayi, O. O. Akinade, H. A. Owolabi, H. A. Alaka, M. Pasha, Adv. Eng. Inform. 30, 500-521 (2016) [CrossRef] [Google Scholar]
- J. Ram, N. K. Afridi, K. A. Khan, Built Environment Project and Asset Management 9, 564-579 (2019) [CrossRef] [Google Scholar]
- S. Tweneboah-Koduah, K. E. Skouby, R. Tadayoni, Wireless Personal Communications 95, 169-185 (2017) [Google Scholar]
- T. H. Szymanski, IT Professional 19, 34-41 (2017) [Google Scholar]
- Y. Zhang, Y. S. Zhang, W. She, L. Yang, G. J. Lin, Y. G. Yang, Constr. Build. Mater. 201, 278-285 (2019) [Google Scholar]
- R. Naboni, L. Breseghello, A. Kunic, Addit. Manuf. 27, 305-317 (2019) [Google Scholar]
- E. L. Kreiger, M. A. Kreiger, M. P. Case, Addit. Manuf. 28, 39-49 (2019) [Google Scholar]
- G. C. Ji, T. Ding, J. Z. Xiao, S. P. Du, J. Li, Z. H. Duan, Materials 12, 14 (2019) [Google Scholar]
- X. Zhang, M. Y. Li, J. H. Lim, Y. W. Weng, Y. W. D. Tay, H. Pham, Q. C. Pham, Autom. Constr. 95, 98-106 (2018) [CrossRef] [Google Scholar]
- T. A. M. Salet, R. J. M. Wolfs, International Conference on Progress in Additive Manufacturing 8-13 (2016) [Google Scholar]
- F. Bos, R. Wolfs, Z. Ahmed, T. Salet, Virtual Phys. Prototyp. 11, 209-225 (2016) [Google Scholar]
- ECSO, Information Modelling in the EU construction sector (2019) [Google Scholar]
- NBS, National BIM Report (2019) [Google Scholar]
- B. C. Group, Digital in engineering and construction: the transformative power of BIM (2016) [Google Scholar]
- I. Gibson, D. Rosen, B. Stucker, Additive manufacturing technologies: 3D printing, rapid prototyping, and direct digital manufacturing (2015) [Google Scholar]
- L. Chen, Y. He, Y. Yang, S. Niu, H. Ren, The International Journal of Advanced Manufacturing Technology 89, 3651-3660 (2016) [CrossRef] [Google Scholar]
- M. Attaran, Business Horizons 60, 677-688 (2017) [Google Scholar]
- ISO/ASTM 52900-15 Standard Terminology for Additive Manufacturing - General Principles - Terminology (2015) [Google Scholar]
- H. Kim, Y. Lin, T. L. B. Tseng, Rapid Prototyping J. 24, 645-669 (2018) [CrossRef] [Google Scholar]
- M. K. Thompson, G. Moroni, T. Vaneker, G. Fadel, R. I. Campbell, I. Gibson, A. Bernard, J. Schulz, P. Graf, B. Ahuja, F. Martina, CIRP Annals 65, 737-760 (2016) [CrossRef] [Google Scholar]
- S. Richter, S. Wischmann, iit-Berlin, Additive manufacturing methods (2016) [Google Scholar]
- S. A. M. Tofail, E. P. Koumoulos, A. Bandyopadhyay, S. Bose, L. O’Donoghue, C. Charitidis, Mater. Today 21, 22-37 (2018) [CrossRef] [Google Scholar]
- S. Yazici, J. Archit. Eng. 24, 1-9 (2018) [CrossRef] [Google Scholar]
- G. Cesaretti, E. Dini, X. De Kestelier, V. Colla, L. Pambaguian, Acta Astronaut. 93, 430-450 (2014) [Google Scholar]
- A. Angrish, IEEE Aerospace Conference 1-6 (2014) [Google Scholar]
- J. Bhattacharjya, S. Tripathi, A. Taylor, M. Taylor, D. Walters, IFIP Advances in Information and Communication Technology 434, 365-372 (2014) [Google Scholar]
- J. Z. Gul, M. Sajid, M. M. Rehman, G. U. Siddiqui, I. Shah, K. H. Kim, J. W. Lee, K. H. Choi, Science and Technology of Advanced Materials 19, 243-262 (2018) [CrossRef] [PubMed] [Google Scholar]
- B. Nematollahi, M. Xia, J. Sanjayan, International Symposium on Automation and Robotics in Construction 260-267 (2017) [Google Scholar]
- B. García de Soto, I. Agustí-Juan, J. Hunhevicz, S. Joss, K. Graser, G. Habert, B. T. Adey, Autom. Constr. 92, 297-311 (2018) [CrossRef] [Google Scholar]
- K. Pacewicz, A. Sobotka, L. Gołek, MATEC Web of Conferences 222, (2018) [Google Scholar]
- N. Labonnote, P. Rüther, International Conference on Sustainable Smart Manufacturing 201-206 (2017) [Google Scholar]
- ApisCor, Press kit of the Dubai project, https://www.apis-cor.com/(accessed 11 January 2020) [Google Scholar]
- T. Di Carlo, B. Khoshnevis, Y. Chen, Asme, Manufacturing Additively, with Fresh Concrete (2014) [Google Scholar]
- B. Khoshnevis, R. Russell, H. Kwon, S. Bukkapatnam, IEEE Robotics and Automation Magazine 8, 33-42 (2001) [CrossRef] [Google Scholar]
- F. Ceccanti, E. Dini, X. D. Kestelier, V. Colla, L. Pambaguian, Proceedings of the 61th International Astronautical Congress IAC 2010, Prague, Czech Republic (2010) [Google Scholar]
- S. Lim, R. A. Buswell, T. T. Le, S. A. Austin, A. G. F. Gibb, T. Thorpe, Autom. Constr. 21, 262-268 (2011) [CrossRef] [Google Scholar]
- S. J. Keating, J. C. Leland, L. Cai, N. Oxman, Sci. Robot. 2, 15 (2017) [Google Scholar]
- G. Liu, E. Bai, J. Xu, T. Wang, S. Chang, IOP Conference Series: Earth and Environmental Science 267, (2019) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.