Open Access
| Issue |
E3S Web Conf.
Volume 178, 2020
High Speed Turbomachines and Electrical Drives Conference 2020 (HSTED-2020)
|
|
|---|---|---|
| Article Number | 01006 | |
| Number of page(s) | 9 | |
| DOI | https://doi.org/10.1051/e3sconf/202017801006 | |
| Published online | 09 July 2020 | |
- G.J. Neidhöfer, A.G. Troedson, Large converterfed synchronous motors for high speeds and adjustable speed operation: Design features and experience, IEEE Trans. on Energy Conversion 14, 3 (September 1999) [Google Scholar]
- M. Ahrens, U. Bikle, R. Gottkehaskamp, H. Prenner, Electrical Design of High-Speed Induction Motors of up to 15 MW and 20000 rpm, IEE Conf. on Power Electronics, Machines and Drives, 487, 381–386 (2002) [CrossRef] [Google Scholar]
- A. Binder, T. Schneider, High-speed inverter-fed AC drives, Int. Aegean Conference on Electrical Machines and Power Electronics, 9–16 (2007) [CrossRef] [Google Scholar]
- R.R. Moghaddam, High speed operation of electrical machines, a review on technology, benefits and challenges, IEEE Energy Conversion Congress and Exposition, 5539–5546 (2014) [Google Scholar]
- N. Uzherov, A. Smirnov, C.H. Park, J.H. Ahn, J. Heikkinen, J. Pyrhönen, Design aspects of highspeed electrical machines with active magnetic bearings for compressor applications, IEEE Trans. on Ind. Electronics 64, 8427–8436 (2017) [CrossRef] [Google Scholar]
- A. Tessarolo, G. Zocco, C. Tonello, Design and testing of a 45-MW 100-Hz quadruple-star synchronous motor for a liquefied natural gas turbo-compressor drive, IEEE Trans. on Industry Applications 47, 3, 1210–1219 (May/June 2011) [CrossRef] [Google Scholar]
- T. Holopainen, P. Jörg, O. Liukonnen, Comparison of twoand four-pole VSD motors up to 4000 RPM, 45th Turbomachinery and 32nd Pump Symposia, Houston, Texas (2016) [Google Scholar]
- T. Mauffrey, J-F. Pradurat, L. Durantay, J. Fontini, Comparison of 5 different squirrel cage rotor designs for large high speed induction motors, PCIC Europe 2013, Istanbul, Turkey (2013) [Google Scholar]
- J.K. Steinke, R. Vuolle, H. Prenner, J. Järvinen, New variable speed drive with proven motor friendly performance for medium voltage motors, IEEE International Electric Machines and Drives Conference IEMDC’99, 235–239 (1999) [Google Scholar]
- IEC 60034-18-42: Rotating electrical machines – Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters – Qualification tests (2017) [Google Scholar]
- T. Holopainen, P. Jörg, J. Niiranen, D. Andreo, Electric motors and drives in torsional vibration analysis and design, 40th Turbomachinery Symposium, Houston, Texas (2013) [Google Scholar]
- M. Bruha, Z. Peroutka, Torsional vibration in large variable speed drive systems: Origin and mitigation methods, EPE’15 ECCE-Europe – 17th European Conference on Power Electronics and Applications, Geneve, Switzerland (2015) [Google Scholar]
- M. Bruha, et al., Torsional issues related to variable frequency control of elastic drive systems, IECON 2016 – 37th Annual Conference on IEEE Industrial Electronics Society, Florence, Italy, 2981–2987 (2016) [Google Scholar]
- M. Bruha, Electro-mechanical interaction between electric drive and its mechanical load and control interventions mitigating unwanted vibration phenomena: PhD thesis (University of West Bohemia, 2018) [Google Scholar]
- P. Jörg, A. Tresch, M. Bruha, A model based approach to optimize controls of a large LCI VSD for minimal grid-side sub-synchronous torsional interaction, PCIC Europe 2013, Istanbul, Turkey, (2013) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.