Open Access
| Issue |
E3S Web Conf.
Volume 184, 2020
2nd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED 2020)
|
|
|---|---|---|
| Article Number | 01008 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/202018401008 | |
| Published online | 19 August 2020 | |
- Vishwas Lomate, Salunke M, K. Rushikesh, S. Gajanan “Injection Moulding Methods Design, Optimization, Simulation of Plastic Toy Building Block by Mould Flow Analysis”. International Journal of Mechanical Engineering and Technology (2015). [Google Scholar]
- Sanusi Md, Aziz, Ali Amran, Idayu N, Hadzley Md, and S Sivarao. “Optimization of Processing parameters in Linear Runner Family Injection Mould Using Mould Flow Simulation Software”. ARPN Journal of Engineering and Applied Sciences (2016) [Google Scholar]
- S. Rajalingam, Awang Bono and Jumat bin Sulaiman “A statistical experimental study on shrinkage of injection-moulded part” International Journal of Humanities and Management Sciences (IJHMS) Volume 1, Issue 1, 2013 pp 2320-4044 [Google Scholar]
- MD Helen, Huszar M, Belblidia F, Arnold C, David Bould, Johann Sienz. “Sustainable Injection Moulding: The Impact of Materials Selection and Gate Location on Part Warpage and Injection Pressure”. Sustainable Materials and Technologies 5 (2015) 1-8. [CrossRef] [Google Scholar]
- Gurjeet, Pradhan MK, Ajay Verma “Multi Response optimization of injection moulding Processing parameters to reduce cycle time and warpage”, Materials today: proceedings • January 2018. [Google Scholar]
- Satyanarayana kosaraju, Vijay Kumar M, Sateesh N. “Optimization of Machining Parameter in Turning Inconel 625”, 6th International Conference of Materials Processing and Characterization (ICMPC 2016). [Google Scholar]
- N. Tosun, “Determination of optimum parameters for multiperformance characteristics in drilling by using grey relational analysis”, International Journal Advanced Manufacturing Technology, 28, 2006, pp. 450-455. [Google Scholar]
- A.Noorul Haq, P. Marimuthu, R. Jeyapaul, “Multi-response optimization of machining parameters of drilling Al/SiC MMC using grey relational analysis in the Taguchi method, 2008, pp. 250-255. [Google Scholar]
- V. Balaji, N. Sateesh, M. Manzoor Hussain, Manufacture of Aluminium Metal Matrix Composite (Al7075-SiC) by Stir Casting Technique, 2015, Materials Today Proceedings, Volume 2, Issues 4-5, pp 3403-3408. [Google Scholar]
- N. Sateesh, P.Sampath Rao, D.V. Ravishanker, K. Satyanarayana, 2015, Effect of Moisture on GFRP Composite Materials, Materials Today Proceedings, Volume 2, Issues 4-5, pp 2902-2908 [Google Scholar]
- Ratna Deepika Manikonda, Satyanarayana kosaraju, K. Arul Raj, N. Sateesh, (2018), Wear Behavior Analysis of Silica Carbide Based Aluminum Metal Matrix Composites, Materials Today: Proceedings, Volume 5, Issue 9, Part 3, Pages 20104-20109 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.