EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 184 (2020) E3S Web Conf., 184 (2020) 01029 References
Open Access
Issue
E3S Web Conf.
Volume 184, 2020
2nd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED 2020)
Article Number 01029
Number of page(s) 5
DOI https://doi.org/10.1051/e3sconf/202018401029
Published online 19 August 2020
  1. Li, W., Krehl, J., Gillespie, J.W., and Helder, D., 2004, “Process evaluation of the vacuum assisted process.” Journal of Composite Materials, 38 (20), pp. 1803-1814. [Google Scholar]
  2. Lee, Y.J., Wu, J.H., and Hsu, Y., 2006, “A prediction method on in – plane permeability of mat / roving fiber laminates in vacuum assisted resin transfer molding.” Journal of Polymer Composites, pp. 665-670. [Google Scholar]
  3. Antonucci, V., Esposito, M., Ricciardi, M.R., Raffane, M., Zarrelli, M., and Giordano, M., 2011, “Permeability characterization of stitched carbon fiber preforms by fiber optic sensors.” Express Polymer Letters, 12, pp. 1075-1084. [Google Scholar]
  4. Xludong Sun, Shoujie Li, and James Lee, L., 1998, “Mold filling analysis in vacuum assisted resin transfer molding part 1: SCRIMP based on a high permeable medium.” Journal of Polymer Composites, 19(6), pp. 807-817. [CrossRef] [Google Scholar]
  5. Chensong Dong and Tuong Yung Tang., 2010, “A generic model of predicting permeability of fiber mats.” Journal of Advanced Materials Research, 123, pp. 515-518. [CrossRef] [Google Scholar]
  6. Bryan Louis, M., Claudio Di Fratta, Mario Danzi, Dr. Markus Zogg and Prof. Dr. Paoloermanni, 2011, “Improving time effective and robust techniques for measuring in plane permeability of fibre performs for lcm processing.” SEICO11– 32nd International conference –New Material Characteristics to cover New Application Needs session Paris, 3A, pp. 204-211. [Google Scholar]
  7. Min Li, Shao- Kai Wang, Yi-Zhuo Gu, Yan-Xia Li, Kevin Potter, and Zuo – Guang Zhang., 2012, “Evaluation of through thickness permeability and the capillary effect in vacuum assisted liquid molding process.” Journal of Composites Science and Technology, 72, pp. 873-878. [Google Scholar]
  8. Yulu Ma, Xiao bin Hu and Dongdi Wu., 1997, “The permeability of glass fiber mat and its influence on the filling time of R.T.M process. “Journal of Composites Processing Microstructure, Gold Coast Australia, pp. 19 - 26. [Google Scholar]
  9. Hossein Golestanian., 2007, “Physical determination of permeability variation with porosity for composite performs.” Journal of Engineering Science, Industrial & Mechanical Engineering Special Issue, 18 (3-4), pp. 67-73. [Google Scholar]
  10. Hayward, J.S., and Harris, B., 1990, “The effect of vacuum assistance in resin transfer moulding.” Journal of Composites Manufacturing, 1(3), pp. 161-166. [CrossRef] [Google Scholar]
  11. Elias Riagas, J., Thomas Mulkern J., Shawn Walsh, M., and Steven Nguyen., P., 2001, “Effects of process conditions on vacuum assisted resin transfer molding process (VARTM).” ARL – TR – 2480, pp. 1-55. [Google Scholar]
  12. Dominik Bender, Jens Schuster, and Dirk Heider., 2006, “Flow rate control during vacuum assisted transfer molding (VARTM) processing.” Journal of Composites Science and Technology, 66, pp. 2265-2271. [CrossRef] [Google Scholar]
  13. Vishwanath Kedari, R., Basil Farah, l., and Kuang – Ting Hsiao., 2011, “Effects of vacuum pressure, inlet pressure, and mold temperature on the void content, volume fraction of polyester / E- glass fiber composites manufactured with VARTM process.” Journal of Composite Materials, 45 (26), pp. 2727-2742. [Google Scholar]
  14. K Ghose, S., Cano R.J., Britton, S.M., Watson, A., Jensen, B.J., and Connell J.W., 2011, “High temperature VARTM of phenylethynyl terminated imide (PETI) resins.” SAMPE Journal, 47 (22), pp. 6-15. [Google Scholar]
  15. Suhad Salman, D., Moharman Sharba, J., Leman, Z., Sultan, M.T.H., Ishak, M.R., and Cardona, F., 2015, “Physical, mechanical, and morphological properties of woven kenaf/ polymer composites produced using a vacuum infusion technique.” International Journal of Polymer Science, 2015, pp. 1-10. [Google Scholar]
  16. Correia, N.C., Robitaille, F., Long, A.C., Rudd, C.D., Simacek, P., and Advani, S.G., 2005, “Analysis of the vacuum infusion moulding process: 1. Analytical formulation.” Journal of Composites Part A, 36, pp. 1645-1656. [CrossRef] [Google Scholar]
  17. Govignon, Q., Bickerton, S., and Kelly, P.A., 2012, “Experimental investigation into the post – filling stage of the resin infusion process.” Journal of Composite Materials, 47 (12), pp. 1479-1492. [Google Scholar]
  18. Srinivas Shenoy Heckadka, Suhas Yeshwant Nayak, Karan Narang and Kirti Vardhan Pant., 2015, “Chopped strand/plain weave e-glass as reinforcement in vacuum bagged epoxy composites.” International journal of materials, 2015, pp. 1 - 7. [Google Scholar]
  19. Staffan Lundstorm, S., and Rikard Gebart, B., 1994, “Influence from process parameters on void formation in resin transfer molding.” Journal of Polymer Composites, 15(1), pp. 25-33. [CrossRef] [Google Scholar]
  20. Kundavarapu Vengalrao, Kopparthi Phaneendra Kumar, Dasari Venkata Ravi Shanker, Nadendla Srinivasababu, Aerra Kiran Kumar Yadav. “An investigation on the Quality of the Laminates Produced by VARTM Process and Process parameters”, Materials Today: Proceedings, 2017. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.