Open Access
| Issue |
E3S Web Conf.
Volume 184, 2020
2nd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED 2020)
|
|
|---|---|---|
| Article Number | 01049 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/202018401049 | |
| Published online | 19 August 2020 | |
- Zhang, Haoqiang, Xibin Wang, and Siqin Pang. “A mathematical modeling to predict the cutting forces in microdrilling.” Mathematical Problems in Engineering 2014 (2014). [Google Scholar]
- Singh, Akhilesh Kumar, Vidyut Dey, and Ram Naresh Rai. “Mechanised TIG Welding Gives Consistent Bead Geometry, A Case Study.” International Journal on Recent Technologies in Mechanical and Electrical Engineering 2, no. 8 (2015): 31-35. [Google Scholar]
- Chandrasekharan, V., S.G. Kapoor, and R.E. DeVor. “A mechanistic approach to predicting the cutting forces in drilling: with application to fiber-reinforced composite materials.” (1995): 559-570. [Google Scholar]
- Kim, D.W., Cho, M.W., Seo, T.I. and Lee, E.S., 2008. Application of design of experiment method for thrust force minimization in step-feed micro drilling. Sensors, 8(1), pp. 211-221. [Google Scholar]
- Hasan, Mahadi, Jingwei Zhao, and Zhengyi Jiang. “A review of modern advancements in micro drilling techniques.” Journal of Manufacturing Processes 29 (2017): 343-375. [Google Scholar]
- Sengar, Shailesh S., Vaibhav Raghav, and Chadaram Srinivasu. “Design & Fabrication of a Special Tool to Produce Square Hole.” Procedia materials science 6 (2014): 1823-1836. [CrossRef] [Google Scholar]
- Srinivasa Rao D, Sandhya Rani MN, Sarfaraz Nawa z Syed and Suresh Kumar Tummala, E3S Web of Conferences 87 01003 (2019) [Google Scholar]
- Singh, Akhilesh Kumar, Vidyut Dey, and Ram Naresh Rai., Techniques to improveweld penetration in TIG welding (A review), Materials Today: Proceedings. 4.2 (2017) 1252-1259, https://doi.org/10.1016/j.matpr.2017.01.145 [Google Scholar]
- Akhilesh Kumar Singh, Tapas Debnath, Vidyut Dey & Ram Naresh Rai, An Approach to Maximize Weld Penetration During TIG Welding of P91 Steel Plates by Utilizing Image Processing and Taguchi Orthogonal Array. J. Inst. Eng. India Ser. C. 98 (2017) 541-551, https://doi.org/10.1007/s40032-016-0268-3 [Google Scholar]
- Akhilesh Kumar Singh, Vidyut Dey, Ram Naresh Rai & Tapas Debnath, Weld Bead Geometry Dimensions Measurement based on Pixel Intensity by Image Analysis Techniques. J. Inst. Eng. India Ser. C. 100 (2019) 379-384, https://doi.org/10.1007/s40032-017-0392-8 [Google Scholar]
- Singh, Akhilesh Kumar, Vidyut Dey, and Ram Naresh Rai, Study on the effect of high-temperature ceramic fiber insulating board to weld grade P-91 steel, Journal of Manufacturing Processes. 25 (2017) 1-7, https://doi.org/10.1016/j.jmapro.2016.09.006 [Google Scholar]
- Singh, A.K., Dey, V. & Rai, R.N., A Study to Enhance the Depth of Penetration in Grade P91 Steel Plate Using Alumina as Flux in FBTIG Welding. Arab J Sci Eng. 42 (2017) 4959-4970, https://doi.org/10.1007/s13369-017-2605-0 [Google Scholar]
- Singh, Akhilesh Kumar, Mayank Kumar, Vidyut Dey, and Ram Naresh Rai, A Study to Increase Weld Penetration in P91 Steel During TIG Welding by using Activating Fluxes, In IOP Conference Series: Materials Science and Engineering. 225 (2017) 012099, https://doi.org/10.1088/1757-899X/225/1/012099 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.