EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 184 (2020) E3S Web Conf., 184 (2020) 01072 References
Open Access
Issue
E3S Web Conf.
Volume 184, 2020
2nd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED 2020)
Article Number 01072
Number of page(s) 9
DOI https://doi.org/10.1051/e3sconf/202018401072
Published online 19 August 2020
  1. N. Chawla and K.K. Chawla, Metal Matrix Composites, 2. Springer-Verlag, New York, (2013). [Google Scholar]
  2. J.P. Davim, Machining of Metal Matrix Composites. Springer-Verlag, London (2012). [CrossRef] [Google Scholar]
  3. C-W. Chang and C-P. Kuo, Int. J. Mach. Tools Manuf., vol. 47, no. 1, pp. 141-147 (2007). [Google Scholar]
  4. C.C. Tsao and H. Hocheng, Int. J. Mach. Tools Manuf., vol. 44, no. 10, pp. 1085-1090 (2004). [Google Scholar]
  5. R. Ramanujam, N. Muthukrishnan, and R. Raju, Int. J. Precis. Eng. Manuf., vol. 12, no. 4, pp. 651-656 (2011). [CrossRef] [Google Scholar]
  6. M. Seeman, G. Ganesan, R. Karthikeyan, and A. Velayudham, Int. J. Adv. Manuf. Technol., vol. 48, no. 5-8, pp. 613-624 (2010). [Google Scholar]
  7. A.K. Sahoo, S. Pradhan, and A.K. Rout, Arch. Civ. Mech. Eng., vol. 13, no. 1, pp. 27-35 (2013). [CrossRef] [Google Scholar]
  8. R.K. Bhushan, S. Kumar, and S. Das, “Effect of machining parameters on surface roughness and tool wear for 7075 Al alloy SiC composite,” Int. J. Adv. Manuf. Technol., vol. 50, no. 5-8, pp. 459-469 (2010). [Google Scholar]
  9. M.S. Phadke, Quality engineering using robust design. Prentice Hall, (1989). [Google Scholar]
  10. V.N. Nair et al., Technometrics, vol. 34, no. 2, pp. 127-161 (1992). [Google Scholar]
  11. X. Li and W.K.H. Seah, Wear, vol. 247, no. 2, pp. 161-171 (2001). [Google Scholar]
  12. A. Manna and B. Bhattacharayya, J. Mater. Process. Technol., vol. 140, no. 1, pp. 711-716, (2003). [CrossRef] [Google Scholar]
  13. R. Sekhar and T.P. Singh, vol. 4, no. 2, pp. 197-207 (2015). [Google Scholar]
  14. T. Ozben, E. Kilickap, and O. Cak\ir, J. Mater. Process. Technol., vol. 198, no. 1, pp. 220-225, (2008). [CrossRef] [Google Scholar]
  15. J. Tlusty and G.C. Andrews, CIRP Ann. Technol., vol. 32, no. 2, pp. 563-572 (1983). [CrossRef] [Google Scholar]
  16. H.K. Tönshoff, J.P. Wulfsberg, H.J.J. Kals, W. König, and C.A. Van Luttervelt, CIRP Ann. Technol., vol. 37, no. 2, pp. 611-622 (1988). [CrossRef] [Google Scholar]
  17. G. Byrne, D. Dornfeld, I. Inasaki, G. Ketteler, W. König, and R. Teti, CIRP Ann. Technol., vol. 44, no. 2, pp. 541-567 (1995). [CrossRef] [Google Scholar]
  18. R. Teti, K. Jemielniak, G. O’Donnell, and D. Dornfeld, “Advanced monitoring of machining operations,” CIRP Ann. Technol., vol. 59, no. 2, pp. 717-739, (2010) [CrossRef] [Google Scholar]
  19. Widia, “Widia 2010 Turning Catalog.” (2010). [Google Scholar]
  20. P.D. Welch, IEEE Trans. audio Electroacoust., vol. 15, no. 2, pp. 70-73 (1967). [CrossRef] [Google Scholar]
  21. J.W. Cooley and J.W. Tukey, Math. Comput., vol. 19, no. 90, p. 297, (1965). [Google Scholar]
  22. A. Brandt, Noise and vibration analysis: signal analysis and experimental procedures. John Wiley & Sons, (2011). [Google Scholar]
  23. S. Gade and H. Herlufsen, “Use of Weighting Functions in DFT/FFT analysis,” B & K Tech. Rev., vol. 3 (1987). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.