EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 185 (2020) E3S Web Conf., 185 (2020) 01058 References
Open Access
Issue
E3S Web Conf.
Volume 185, 2020
2020 International Conference on Energy, Environment and Bioengineering (ICEEB 2020)
Article Number 01058
Number of page(s) 6
Section Energy Engineering and Power System
DOI https://doi.org/10.1051/e3sconf/202018501058
Published online 01 September 2020
  1. Jinquan W, Bing Z, Yongsong Y. (1995) Test and analysis of explosion of lead-acid battery for starting [J]. Fire Science & Technology, (04):44–45 (in Chinese). [Google Scholar]
  2. Guang-fu W. (2012) Fire investigation and identification of a battery compartment fire[J]. Fire Science & Technology, 31(11):1249–1251 (in Chinese). [Google Scholar]
  3. Mariani A, Thanapalan K, Stevenson P, et al. (2013) Techniques for estimating the VRLA batteries ageing, degradation and failure modes[C]//International Conference on Automation & Computing. IEEE. [Google Scholar]
  4. Bouabidi, Ayadi, Kossentini, et al. (2016) Cycling Performances and Failure Modes for AGM and Standard Flooded Lead Acid Batteries under Partial State of Charge Mode[J]. Journal of energy engineering,142 (3):04015027–1-04015027-7. [CrossRef] [Google Scholar]
  5. Valenciano J, A. Sánchez, Trinidad F, et al. (2006) Graphite and fiberglass additives for improving high- rate partial-state-of-charge cycle life of valve- regulated lead-acid batteries[J]. Journal of Power Sources, 158(2):851–863. [Google Scholar]
  6. Qiu-hong W, Hua-qing WANG. (2005) On the failure modes of VRLA batteries and their influence factors[J]. Chinese Labat Man, (03):108–111 (in Chinese). [Google Scholar]
  7. Guo-Rong C, Zheng-Kuang H. (2013) Research on fault prediction method of valve-regulated lead-acid battery based on internal resistance [J]. Mechanical and Electrical Information, (18):37–38 (in Chinese). [Google Scholar]
  8. Ball R J, Kurian R, Evans R, et al. (2002) Failure mechanisms in valve regulated lead/acid batteries for cyclic applications[J]. Journal of Power Sources, 109(1):189–202. [Google Scholar]
  9. Wei C. (2012) Operation, maintenance and troubleshooting of valve-regulated sealed lead-acid battery for power [J]. Electric Engineering, (11):5–7 (in Chinese). [Google Scholar]
  10. Qi Y, Yang X. (2009) Maintainance on Substation Valve Control Type Lead Acid Accumulator[J]. Hub Electric Power, 33 (02):14–15+46 (in Chinese). [Google Scholar]
  11. Hu J, Guo Y, Zhou X. (2006) Thermal runaway of valve-regulated lead-acid batteries[J]. Journal of Applied Electrochemistry, 36(10):1083–1089 (in Chinese). [Google Scholar]
  12. Pei-Chun W, Ke-Wen Z. (2002) The development trend of lead-acid storage batteries in the first ten years of the new century [J]. Marine Electric & Electronic Engineering, (02): 46–55+64 (in Chinese). [Google Scholar]
  13. Zhen-Ze H, Hong-Yu C, Jian Z. (2004) Failure and Maintenance for Valve-Regulated Lead-Acid Batteries[J]. The World of Power Supply, (12):46–49 (in Chinese). [Google Scholar]
  14. Berndt D. (2001) Valve-regulated lead-acid batteries[J]. Journal of power sources, 95(1/2):p.2–12. [Google Scholar]
  15. Meng T. (2014) Analysis and research on causes of fire lead-acid battery system[D]. Shenyang University of Technology, (in Chinese). [Google Scholar]
  16. Zhi-Xue C, Ya-Hui L, Ke-Chan L. (2010) Discussion on short circuit of PE separators for lead acid batteries [J]. Chinese Labat Man,47(04):154–157 (in Chinese). [Google Scholar]
  17. Bo-Yun L, Bo Z, Xiang-Lie Y I, et al. (2017) Gas evolving characteristics of submarine battery in the float-charging process without temperature compensation[J]. Fire Science and Technology, 36(01):23–26 (in Chinese). [Google Scholar]
  18. JunY, Cheng H, Hao W. (2018) Research progress of failure model and mechanism analysis of lead-acid battery J]. Chinese Journal of Power Sources,42(03):459–462 (in Chinese). [Google Scholar]
  19. Lam L T, Haigh N P, Phyland C G, et al. (2004) Failure mode of valve-regulated lead-acid batteries under high-rate partial-state-of-charge operation[J]. Journal of Power Sources, 133(1):126–134. [Google Scholar]
  20. Xuemei L, Weishan L I. (2003) The influence of bismuth on hydrogen and oxygen evolution behavior in lead-acid battery[J]. Battery Bimonthly, (01):55–57 (in Chinese). [Google Scholar]
  21. Yantong W, Kaili X, Hui Z. (2016) Study on the distribution rule of hydrogen concentration in battery charging area [J]. Safety & Security,37 (10):32–35+39 (in Chinese). [Google Scholar]
  22. Jian Z, Fan-Lin B O. (2002) Study on premature failure of VRLA batteries[J]. Battery Industry, (Z1):156–159 (in Chinese). [Google Scholar]
  23. Cheng S. (2003) A review of thermal runaway in VRLA battery and countermeasures[J]. Chinese Labat Man, (03):134–136 (in Chinese). [Google Scholar]
  24. Xiaoxiang S, Jianxi Z. (2017) Discussion on the thermal runaway in gel lead-acid battery[J]. Energy Storage ence and Technology,6(01):122–126 (in Chinese). [Google Scholar]
  25. Jian-Xi Z, Bin Y, Xiao-Xiang S. (2015) Discussion about AGM/GEL hybrid battery[J]. Chinese Labat Man, 52(06):295–298 (in Chinese). [Google Scholar]
  26. Shuangxi S. Study on the performance of flame retardant container of VRLA battery [J]. Chinese Labat Man,2013,50 (05):213–216+221 (in Chinese). [Google Scholar]
  27. Si-Chuan R. (2008) Processing and analysis of sulfation malfunction in lead-acid battery[J]. Telecommunications for Electric Power System,25(S1):120–121+131 (in Chinese). [Google Scholar]
  28. XIE Xiao-yun, LIU Yue-jing, XIANG Bai-lin. (2010) Research progress in lead-acid battery grid material in China[J]. Battery Bimonthly, 40(3):173–176 (in Chinese). [Google Scholar]
  29. Tengfei T, Yuan Y, Yangjun H. (2017) Discussion on Water Loss of UPS Valve-Controlled Sealed Lead Acid Battery [J]. Practical Electronics, (Z1):49–50 (in Chinese). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.