Features of snow retention and counteraction to wind erosion of soils due to high stubble residues formed by a reaper designed for two-phase harversting by batch method

Mikhail Konstantinov; Ivan Gluchkov; Alexander Nesvat; Igor Gerasimenko; Igor Ognev

doi:10.1051/e3sconf/202019301016

All issues

Volume 193 (2020)

E3S Web Conf., 193 (2020) 01016

References

Open Access

Issue		E3S Web Conf. Volume 193, 2020 International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2020)


Article Number		01016
Number of page(s)		6
Section		Agricultural Science
DOI		https://doi.org/10.1051/e3sconf/202019301016
Published online		08 October 2020

M. M. Konstantinov, I. N. Glushkov, Yu. I. Korovin, S. S. Pashinin, Assessment of the quality of snow retention on the stubble wings formed when working with a special device portion header, Bulletin of the Ryazan state agrotechnological University named after P. A. Kostychev. 1 (41), pp. 114-119, (2019) [Google Scholar]
M. M. Konstantinov, I.S. Galiev, I. N. Glushkov, K. S. Poteshkin, Improvement of technical means for preserving moisture in arid conditions of the southern Urals, In the collection: Improvement of engineering and technical support of technological processes in the agro-industrial complex: materials of the international scientific and practical conference, pp. 59-64, (2015) [Google Scholar]
O. A. Fedorova, Factors affecting the use of combine harvesters, Proceedings of the lower Volga agrodiversity complex: science and higher professional education, 4 (48), pp. 239-245, (2017) [Google Scholar]
I. V. Bumbar, V. V. Epifantsev, O. V. Shchegorets, V. T. Sinegovskaya, E. E. Kuznetsov, A. A. Kuvshinov, I. A. Lontseva, N. A. Kapustina, Optimization ofagrotechnicalterms of harvesting of crops, design and operating parameters of crop-harvesting machines under conditions of the Amur region, Russian Federation. Plant Archives, 18 (2), pp. 2567-2572, (2018) [Google Scholar]
S. R. Mkrtchyan, V. D. Ignatov, E. V. Zhalnin, N. I. Struzhkin, Reapers separating the ear part from the stem: state and prospects of development. Agricultural machines and technologies, 4, pp. 18-21, (2013) [Google Scholar]
V. Safonov, M. Lapa, D. Bordan, E. Zhalnin, Use of vortex flows for aerodynamic threshing of agricultural crops. Proceedings of International conference «International conference on modern trends in manufacturing technologies and equipment, ICMTMTE 2019», September 09-13, Sevastopol, Source: E3S WEB OF CONFERENCES, Publisher: EDP Sciences, P. 00004, (2019) [Google Scholar]
I. N. Glushkov, I. V. Gerasimenko, On the issue of determining the optimal width of the transporting device of a portion header with a device for forming a curtain, Izvestiya Orenburg state agrarian University, 4 (66), pp. 135-138, (2017) [Google Scholar]
A.P. Lovchikov, M. M. Konstantinov, Y. I. Korovin, I. I. Ognev, I. G. Ognev, I. N. Glushkov, Study of the thickness of the swath of grain mass from the angle of the searching surface of a spring finger, Bulletin of the Ryazan state agrotechnological University named after P. A. Kostychev, 1 (45), pp. 92-96, (2020) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] M. M. Konstantinov, I. N. Glushkov, Yu. I. Korovin, S. S. Pashinin, Assessment of the quality of snow retention on the stubble wings formed when working with a special device portion header, Bulletin of the Ryazan state agrotechnological University named after P. A. Kostychev. 1 (41), pp. 114-119, (2019) [Google Scholar]

[2] M. M. Konstantinov, I.S. Galiev, I. N. Glushkov, K. S. Poteshkin, Improvement of technical means for preserving moisture in arid conditions of the southern Urals, In the collection: Improvement of engineering and technical support of technological processes in the agro-industrial complex: materials of the international scientific and practical conference, pp. 59-64, (2015) [Google Scholar]

[3] O. A. Fedorova, Factors affecting the use of combine harvesters, Proceedings of the lower Volga agrodiversity complex: science and higher professional education, 4 (48), pp. 239-245, (2017) [Google Scholar]

[4] I. V. Bumbar, V. V. Epifantsev, O. V. Shchegorets, V. T. Sinegovskaya, E. E. Kuznetsov, A. A. Kuvshinov, I. A. Lontseva, N. A. Kapustina, Optimization ofagrotechnicalterms of harvesting of crops, design and operating parameters of crop-harvesting machines under conditions of the Amur region, Russian Federation. Plant Archives, 18 (2), pp. 2567-2572, (2018) [Google Scholar]

[5] S. R. Mkrtchyan, V. D. Ignatov, E. V. Zhalnin, N. I. Struzhkin, Reapers separating the ear part from the stem: state and prospects of development. Agricultural machines and technologies, 4, pp. 18-21, (2013) [Google Scholar]

[6] V. Safonov, M. Lapa, D. Bordan, E. Zhalnin, Use of vortex flows for aerodynamic threshing of agricultural crops. Proceedings of International conference «International conference on modern trends in manufacturing technologies and equipment, ICMTMTE 2019», September 09-13, Sevastopol, Source: E3S WEB OF CONFERENCES, Publisher: EDP Sciences, P. 00004, (2019) [Google Scholar]

[7] I. N. Glushkov, I. V. Gerasimenko, On the issue of determining the optimal width of the transporting device of a portion header with a device for forming a curtain, Izvestiya Orenburg state agrarian University, 4 (66), pp. 135-138, (2017) [Google Scholar]

[8] A.P. Lovchikov, M. M. Konstantinov, Y. I. Korovin, I. I. Ognev, I. G. Ognev, I. N. Glushkov, Study of the thickness of the swath of grain mass from the angle of the searching surface of a spring finger, Bulletin of the Ryazan state agrotechnological University named after P. A. Kostychev, 1 (45), pp. 92-96, (2020) [Google Scholar]