Open Access
Issue
E3S Web Conf.
Volume 197, 2020
75th National ATI Congress – #7 Clean Energy for all (ATI 2020)
Article Number 11007
Number of page(s) 11
Section Turbomachinery
DOI https://doi.org/10.1051/e3sconf/202019711007
Published online 22 October 2020
  1. R. Kurz and K. Brun, J Eng. Gas Turb. Power, 134, 032401 (2012) [CrossRef] [Google Scholar]
  2. A. Suman, N. Casari, E. Fabbri, L. Di Mare, F. Montomoli and M. Pinelli, Prog. Ener. Comb., 74, 103-151 (2019) [CrossRef] [Google Scholar]
  3. A. Suman, N. Casari, E. Fabbri, M. Pinelli, L. di Mare and F. Montomoli, J Eng. Gas Turb. Power. 141, 032601 (2019) [CrossRef] [Google Scholar]
  4. A. Suman, M. Morini, N. Aldi, N. Casari, M. Pinelli and P. R. Spina, J Turbomach. 139, 041005 (2017) [CrossRef] [Google Scholar]
  5. A. D. Mezheritsky and A. V. Sudarev, The mechanism of fouling and the cleaning technique in application to flow parts of the power generation plant compressors, 90-GT103, Proceedings of the ASME Turbo Expo, edit by ASME, NY (1990) [Google Scholar]
  6. J.-P. Stalder, J Eng. Gas Turb. Power, 23, 363–370 (2001) [CrossRef] [Google Scholar]
  7. I. S. Diakunchak, J Eng. Gas Turb. Power, 114, 161-168 (1991) [CrossRef] [Google Scholar]
  8. C. A Perullo, T. Lieuwen, J. Barron, D. Grace and L. Angello, Evaluation of air filtration options for an industrial gas turbine, GT2015-43736, Proceedings of the ASME Turbo Expo, edit by ASME, NY (2015) [Google Scholar]
  9. C. B Meher-Homji, M. Chaker and A. F. Bromley, The fouling of axial flow compressors Causes, effects, susceptibility and sensitivity, GT2009-59239, Proceedings of the ASME Turbo Expo, edit by ASME, NY (2009) [Google Scholar]
  10. A. Silingardi, P. Astrua, S. Piola, and I. Ventrucci, A Method for a Reliable Prediction of Heavy Duty Gas Turbines Performance Degradation due to Compressor Aging Employing Field Test Data, Proceedings of Power Gen Europe, June 4-6, 2013, Messe, Wien, Austria (2013) [Google Scholar]
  11. A. P. Tarabrin, V. A. Schurovsky, A. I. Bodrov and J.-P. Stalder, Influence of axial compressor fouling on gas turbine unit performance based on different schemes and with different initial parameters, 98-GT-416, Proceedings of the ASME Turbo Expo, edit by ASME, NY (1998) [Google Scholar]
  12. F. Melino, A. Peretto and P. R. Spina, Development and validation of a model for axial compressor fouling simulation, GT2010-22947, Proceedings of the ASME Turbo Expo, edit by ASME, NY (2010) [Google Scholar]
  13. G. F. Aker and H. I. H. Saravanamuttoo, J Eng. Gas Turb. Power, 111, 343-350 (1989) [CrossRef] [Google Scholar]
  14. T. Zaba and P. Lombardi, Experience in the Operation of Air Filters in Gas Turbine Installations, 84-GT-39, Proceedings of the ASME Turbo Expo, edit by ASME, NY (1984) [Google Scholar]
  15. Allison Gas Turbine. Operation and Maintenance manual. Turboshaft models 250C18, A, B & C. 15 September 1971, Rev. 16 June 1975. Detroit Diesel Allison, Division of General Motors Corporation, Indianapolis, IN 46206 [Google Scholar]
  16. W. C. Hinds. Aerosol technology: properties, behavior, and measurement of airborne particles (Wiley & Sons, US, 1999) [Google Scholar]
  17. Standard ISO/IEC GUIDE 98-3:2008. Uncertainty of measurement – Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) [Google Scholar]
  18. JCGM 100:2008. Evaluation of measurement data Guide to the expression of uncertainty in measurement [Google Scholar]
  19. C. A. Schneider, W. S. Rasband, and K. W Eliceiri, Nat. Methods, 9, 671 (2012) [CrossRef] [PubMed] [Google Scholar]
  20. K. Brun, T. A. Grimley, W. C. Foiles and R. Kurz, J Eng. Gas Turb. Power, 137, 042605 (2015) [CrossRef] [Google Scholar]
  21. Standard ISO 12103-1:2016. Road vehicles Test contaminants for filter evaluation Arizona test dust [Google Scholar]
  22. E. Munari, M. Morini, M. Pinelli, P. R. Spina and A. Suman, J Eng. Gas Turb. Power, 139, 022605 (2017) [CrossRef] [Google Scholar]
  23. F. R. Harris, A 7500-SHP Gas Turbine for Naval Boost Propulsion, 61-GTP-5, Proceedings of the ASME Turbo Expo, edit by ASME, NY (1961) [Google Scholar]
  24. E. Schneider, S. D. Bussjaeger, S. Franco, D. Therkorn, J Eng. Gas Turb. Power 132, 062001 (2010) [CrossRef] [Google Scholar]
  25. A. Vulpio, A. Suman, N. casari, M. Pinelli, R. Kurz, K. Brun, Analysis of time-wise compressor fouling phenomenon on a multistage test compressor: performance losses and particle adhesion, GT2020-15418, Proceedings of the ASME Turbo Expo, edit by ASME, NY (2020) [Google Scholar]
  26. N. Aldi, M. Morini, M. Pinelli, P. R. Spina, A. Suman and M. Venturini, J Turbomach. 136, 021016 (2013) [CrossRef] [Google Scholar]
  27. M. Morini, M. Pinelli, P. R. Spina and M. Venturini, J Eng. Gas Turb. Power 133, 072402 (2011) [CrossRef] [Google Scholar]
  28. A. Suman, A. Vulpio, N. Casari, M. Pinelli, K. Rainer, K. Brun, Deposition pattern analysis on a fouled multistage test compressor, GT2020-15476, Proceedings of the ASME Turbo Expo, edit by ASME, NY (2020) [Google Scholar]
  29. N. casari, M. Pinelli, P. R. Spina, A. Suman, A. Vulpio, Performance degradation due to fouling and recovery after washing in a multistage test compressor, GT2020-15488, Proceedings of the ASME Turbo Expo, edit by ASME, NY (2020) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.