Open Access
Issue
E3S Web Conf.
Volume 198, 2020
2020 10th Chinese Geosynthetics Conference & International Symposium on Civil Engineering and Geosynthetics (ISCEG 2020)
Article Number 01013
Number of page(s) 4
Section Geosynthetics Applied Design Theory and Method
DOI https://doi.org/10.1051/e3sconf/202019801013
Published online 26 October 2020
  1. F.F. Ren, Z.J. Yang, J.F. Chen, W.W. Chen. An analytical analysis of the full-range behaviour of grouted rockbolts based on a tri-linear bond-slip model. Construction and Building Materials, 24(3): 361-370 (2010) [Google Scholar]
  2. S. Ma, Z. Zhao, W. Nie, et al. An Analytical Model for Fully Grouted Rockbolts with Consideration of the Pre- and Post-yielding Behavior. Rock Mechanics and Rock Engineering, DOI: 10.1007/s00603-017-1272-5 (2017) Technology, 73:82-91 (2018) [Google Scholar]
  3. L. He, X.M. An, X.B. Zhao, et al. Development of a Unified Rock Bolt Model in Discontinuous Deformation Analysis. Rock Mechanics and Rock Engineering, 51(3): 827-847 (2018) [Google Scholar]
  4. F. Pellet, P. Egger. Analytical model for the mechanical behaviour of bolted rock joints subjected to shearing. Rock Mechanics and Rock Engineering, 29(2): 73-97 (1996) [Google Scholar]
  5. A.M. Ferrero. The shear strength of reinforced rock joints. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 32(6): 595-605 (1995) [CrossRef] [Google Scholar]
  6. W. Wang, Q. Song, C. Xu, et al. Mechanical behaviour of fully grouted GFRP rock bolts under the joint action of pre-tension load and blast dynamic load. Tunnelling and Underground Space Technology, 73:82-91 (2018) [CrossRef] [Google Scholar]
  7. C.H. Liu, Y.Z. Li. Analytical Study of the Mechanical Behavior of Fully Grouted Bolts in Bedding Rock Slopes. Rock Mechanics and Rock Engineering, 50(9):2413-2423 (2017) [Google Scholar]
  8. C. Carranza-Torres. Analytical and Numerical Study of the Mechanics of Rockbolt Reinforcement around Tunnels in Rock Masses. Rock Mechanics and Rock Engineering, 42(2): 175-228 (2009) [Google Scholar]
  9. Y. Cai, Y. Jiang, I. Djamaluddin, et al. An analytical model considering interaction behavior of grouted rock bolts for convergence–confinement method in tunneling design. Int J Rock Mech Min Sci 76:112–126 (2015) [CrossRef] [Google Scholar]
  10. C.H. Tan. Difference solution of passive bolts reinforcement around a circular opening in elastoplastic rock mass. Int J Rock Mech Min Sci, 81:28–38 (2016) [CrossRef] [Google Scholar]
  11. D. Oliveira, M.S. Diederichs. Tunnel support for stress induced failures in Hawkesbury Sandstone. Tunn Undergr Space Technol, 6, 4:10–23 (2017) [CrossRef] [Google Scholar]
  12. Y. Chen. Experimental study and stress analysis of rock bolt anchorage performance. Journal of Rock Mechanics and Geotechnical engineering, 32(5): 428-437 (2014) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.