Open Access
| Issue |
E3S Web Conf.
Volume 201, 2020
Ukrainian School of Mining Engineering - 2020
|
|
|---|---|---|
| Article Number | 01012 | |
| Number of page(s) | 11 | |
| DOI | https://doi.org/10.1051/e3sconf/202020101012 | |
| Published online | 23 October 2020 | |
- Toshov, J.B. (2016). The Questions of the Dynamics of Drilling Bit on the Surface of Well Bottom. Archives of Mining Sciences, 61(2), 275–283. https://doi.org/10.1515/amsc-2016-0020 [CrossRef] [Google Scholar]
- Dong, G., & Chen, P. (2017). A comparative experimental study of shale indentation fragmentation mechanism at the macroscale and mesoscale. Advances in Mechanical Engineering, 9(8), 168781401772624. https://doi.org/10.1177/1687814017726244 [CrossRef] [Google Scholar]
- Cai, C., Wu, K. S., Lian, D., & Yuan, X. H. (2015). Study of rock-breaking mechanism under single-tooth impact. Rock and Soil Mechanics, 36(6), 1659–1666. [Google Scholar]
- Toshniyozov, L.G., & Toshov, J.B. (2019). Analiz teoreticheskikh i eksperimental’nykh issledovaniy v oblasti protsessa sal’nikoobrazovaniya pri burenii skvazhin. Gornyy Informatsionno-Analiticheskiy Byulleten’, (11), 139–151. http://doi.org/10.25018/0236-1493- 2019-11-0-139-151 [Google Scholar]
- Tian, J., Zhang, T., Dai, L., Cheng, W., Yang, L., & Yuan, C. (2018). Dynamic characteristics and test analysis of a new drilling downhole tool with anti-stick-slip features. Journal of Mechanical Science and Technology, 32(10), 4941–4949. https://doi.org/10.1007/s12206-018- 0942-x [CrossRef] [Google Scholar]
- Liu, XD., & Jun-Li, QU (2010). Optimization Research on the Main Geometrical Parameters of PDC Bit. Machinery Design & Manufacture, (275), 803–807. [Google Scholar]
- Chen, S., Arfele, R., Anderle, S., et al. (2013). A new theory on cutter layout for improving PDC bit performance in hard and transit formation drilling. SPE Drill Complete, (284), 338–349. [CrossRef] [Google Scholar]
- Mannanov, U., Toshov, J., & Toshniyozov, L. (2019). Perspective Solutions for the Design of Drilling Tools. E3S Web of Conferences, (105), 03027.https://doi.org/10.1051/e3sconf/2019105 03027 [Google Scholar]
- Toshov, Z.B. (2016). Ways towards optimization of washout components of rock cutting tools. Gornyi Zhurnal, 21–24. https://doi.org/10.17580/gzh.2016.02.04 [Google Scholar]
- Tian, J., Fu, C., Yang, L., Yang, Z., Pang, X., Li, Y., & Liu, G. (2014). The Wear Analysis Model of Drill Bit Cutting Element with Torsion Vibration. Advances in Mechanical Engineering, 7(1), 254026. https://doi.org/10.1155/2014/254026 [CrossRef] [Google Scholar]
- Baszynski, M., & Rydygier, P., & Wojcik, M. (2018). Experimental studies of: Laminate composition, drill bit wear out, and chloride ion concentration as factors affecting CAF formation rate. Microelectronics Reliability, (88–90), 31–37. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.