Open Access
Issue
E3S Web Conf.
Volume 209, 2020
ENERGY-21 – Sustainable Development & Smart Management
Article Number 03013
Number of page(s) 8
Section Session 2. Advanced Energy Technologies: Clean, Resource-Saving, and Renewable Energy
DOI https://doi.org/10.1051/e3sconf/202020903013
Published online 23 November 2020
  1. Fedorova, N. The features of Saaty analytic hierarchy process application for the choice of modernization strategy of energy objects / Energy System Research 2019 E3S Web of Conferences 114, 01001 (2019). URL: https://www.e3s-conferences.org/articles/e3sconf/pdf/2019/40/e3sconf_esr2019_01001.pdf [Google Scholar]
  2. Fedorova, N. Systemic aspects of the energy complex based on coal TPP / Energy System Research 2019 E3S Web of Conferences 114, 06001 (2019). URL: https://www.e3s-conferences.org/articles/e3sconf/pdf/2019/40/e3sconf_esr2019_06001.pdf [Google Scholar]
  3. Code of Regulations RF 90.13330.2012 Thermal power plants. Updated version of Building Regulations II-58-75 (with Amendment No. 1). The date of introduction is 2013-01-01. [Google Scholar]
  4. State standard RF 2.001-2013 Unified system of design documentation (USDD). General provisions (with Amendment). The date of introduction is 2014-06-01. [Google Scholar]
  5. State standard RF 2.701-2008 Unified system of design documentation (USDD). Scheme. Kinds and types. General requirements for implementation (with Amendment). The date of introduction is 2009-07-01. [Google Scholar]
  6. State standard RF 21.403-80 System of design documentation for construction (SDDC). Conditional graphic designations in schemes. Power equipment. The date of introduction is 1981-07-01. [Google Scholar]
  7. Sternman, L.S. Thermal and nuclear power plants. Textbook for high schools / L.S. Sternman, V.M. Lavygin, S.G. Tishin // M .: Publishing House of MPEI, 2000. – 408 p. [Google Scholar]
  8. The set of rules for the thermal power plants design // Moscow, Russian joint-stock company «Unified energy systems of Russia», 2007. – 175 p. [Google Scholar]
  9. NIST, FIPS. Publication 183: Integration Definition of Function Modeling (IDEF0) // National Institute of Standards and Technology. – 1993. – Т. 128. URL: http://www.idef.com [Google Scholar]
  10. Ross, D. T. Architect’s Manual, ICAM Definition Method IDEF0 / D.T. Ross et al. // Computer Aided Manufacturing International, 1980. [Google Scholar]
  11. Marca, D.A. SADT: structured analysis and design technique / D.A. Marca, C.L. McGowan // McGraw-Hill Book Co., Inc.: New York, 1988. – 392 p. [Google Scholar]
  12. Bravoco, R.R. Requirement definition architecture – an overview / R.R. Bravoco, S.B. Yadav // Computers in Industry, 1985. – Т. 6. – №. 4. – P. 237-251. URL: https://www.sciencedirect.com/science/article/pii/0166361585900466 [Google Scholar]
  13. Working paper Methodology of functional modeling IDEF0 // M.: State standard of Russia, 2000. – 75 p. URL: https://nsu.ru/smk/files/idef.pdf [Google Scholar]
  14. R 50.1.028-2001 Information technology support product life cycle. Functional Modeling Methodology // M.: State standard of Russia. – Introduction date 2002-07-01. [Google Scholar]
  15. R 50.1.031-2001 Information technology support product life cycle. Terminological dictionary. Part 1. The stages of the product life cycle // M.: State standard of Russia. – Introduction date 2002-07-01. [Google Scholar]
  16. Fedorova, N.V. Some aspects of functional modeling in the IDEF0 standard as the initial stage of TPPs design / N.V. Fedorova and others // DTS-2019 AIP Conference Proceedings 2188, 050010 (2019). URL: https://aip.scitation.org/doi/pdf/10.1063/1.5138437?class=pdf [Google Scholar]
  17. A typical algorithm for calculating the technical and economic indicators of powerful heating centers. Part 1. Organizational and technological essence of the calculations/ Leningrad, 1981. [Google Scholar]
  18. Working paper 153-34.1-09.321-2002. Methodology for rapid assessment of the economic efficiency of energy-saving measures at thermal power plants. Introduction date 2003-03-01. [Google Scholar]
  19. Fedorova, N.V. Functional modeling in the IDEF0 standard as a tool for describing the processes of TPPs operation and upgrading / N.V. Fedorova, D.A. Shaforost, V.N. Baltyan, A.M. Kolomiytseva // Proceedings of universities. North Caucasus region. Series: Engineering. – 2018. – №. 3 (199). – P. 61-69. [Google Scholar]
  20. ISO 128 Technical drawings – Indication of dimensions and tolerances. [Google Scholar]
  21. ISO 7083 Symbols for geometrical tolerancing – Proportions and dimensions. [Google Scholar]
  22. ISO 13715 Technical drawings – Edges of undefined shape – Vocabulary and indications. [Google Scholar]
  23. ISO 15786 Simplified representation and dimensioning of holes. [Google Scholar]
  24. ISO 16792:2015 Technical product documentation – Digital product definition data practices. [Google Scholar]
  25. Pokhilko, A. F. Modeling of processes and data using CASE-technologies: a tutorial / A.F. Pohilko, I.V. Gorbachev, S.V. Ryabov // Ulyanovsk: UlSTU, 2014. – 163 p. URL: http://venec.ulstu.ru/lib/disk/2014/179.pdf [Google Scholar]
  26. Venikov, V. A. Fundamentals of the theory of similarity and modeling: Terminology / V.A. Venikov // M.: Science, 1973. – T. 88. [Google Scholar]
  27. Ramus – cross-platform system for modeling and analysis of business processes / Official Russian-language website of the project Ramus! URL: http://ramussoftware.com/ [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.