Algorithm development for finding the minimum level of noise immunity of an onboard electrical complex during control tests

Vladimir Kozlovsky; Pavel Nikolaev; Alexander Podgorny; Alexander Saksonov; Luiza Shamina

doi:10.1051/e3sconf/202022101005

All issues

Volume 221 (2020)

E3S Web Conf., 221 (2020) 01005

References

Open Access

Issue		E3S Web Conf. Volume 221, 2020 Energy Systems Environmental Impacts (ESEI 2020)


Article Number		01005
Number of page(s)		7
Section		Influence of Engines on the Environment
DOI		https://doi.org/10.1051/e3sconf/202022101005
Published online		17 December 2020

Antonova, V., Alekseev, S., Tarasov, A., Scheglova, N., Klyavin, O., & Borovkov, A. (2019). Analysis and use of SIMP method in optimization of a car hood design. Paper presented at the E3S Web of Conferences, 140 doi:10.1051/e3sconf/201914004017 [Google Scholar]
Borisenko, V., Kiselev, A., Leoro, L., Borovkov, A., & Boldyrev, Y. (2019). K&C suspension parameters stability by production tolerances. Paper presented at the E3S Web of Conferences, 140 doi:10.1051/e3sconf/201914007007 [Google Scholar]
Ivanov, A., Abyzov, O., Galyshev, Y., & Rumyantsev, V. (2020). The performance test of the car catalytic converter in the conditions of urban operation. Paper presented at the E3S Web of Conferences, 164 doi:10.1051/e3sconf/202016403018 [Google Scholar]
Klochkov, Y., Gazizulina, A., & Golovin, N. (2016). Assessment of organization development speed based on the analysis of standards efficiency. Paper presented at the Proceedings 2nd International Symposium on Stochastic Models in Reliability Engineering, Life Science, and Operations Management, SMRLO 2016, 530-532. doi:10.1109/SMRLO.2016.93 [Google Scholar]
Korovkin, N., & Diop, C. Y. (2016). Minimization of electromagnetic fields intensity and optimization of electrical wiring networks in healthcare facilities. Paper presented at the Proceedings of the 2016 IEEE North West Russia Section Young Researchers in Electrical and Electronic Engineering Conference, EIConRusNW 2016, 604-607. doi:10.1109/EIConRusNW.2016.7448255 [Google Scholar]
Kozlovsky, V., Klochkov, Y., Ostapenko, M., Ushanova, N., & Antipov, D. (2016). Conformity assessment of car quality databases exemplified on the case of the russian car manufacturer ’auto VAZ’. Paper presented at the 2016 5th International Conference on Reliability, Infocom Technologies and Optimization, ICRITO 2016: Trends and Future Directions, 57-60. doi:10.1109/ICRITO.2016.7784925 [Google Scholar]
Kozlovsky, V. N., Lysov, V. E., Ermakov, V. V., Antipov, D. V., & Skripnuk, D. F. (2019). Calculation and statistical experiment on the monte carlo method when assessing the stability of the technical characteristics of the automobile generator set in mass production. Paper presented at the Proceedings of the 2019 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering, ElConRus 2019, 565-568. doi:10.1109/EIConRus.2019.8657034 [Google Scholar]
Papirovskiy, A., Alekseev, S., Tarasov, A., & Borovkov, A. (2019). Development of numerical methods and virtual tests for cyclic durability by finite element method. Materials Physics and Mechanics, 42(6), 859-869. doi:10.18720/MPM.4262019_17 [Google Scholar]
Rakov, V., Ivanov, V. N., Karpov, Y. G., Melehin, V. F., Izmailov, R. A., Yun, V. K., & Zaripova, D. A. (2019). Method for determining the basic energy characteristics of elements of a hybrid car engine. Paper presented at the IOP Conference Series: Earth and Environmental Science, 337(1) doi:10.1088/1755-1315/337/1/012066 [Google Scholar]
Zeziulin, D. V., Yu Tyugin, D., Shashkina, K. M., Kuzmichev, V. A., & Beresnev, P. O. (2018). Autonomous electric commercial vehicle for difficult operating conditions. Paper presented at the IOP Conference Series: Materials Science and Engineering, 386(1) doi:10.1088/1757-899X/386/1/012003 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] Antonova, V., Alekseev, S., Tarasov, A., Scheglova, N., Klyavin, O., & Borovkov, A. (2019). Analysis and use of SIMP method in optimization of a car hood design. Paper presented at the E3S Web of Conferences, 140 doi:10.1051/e3sconf/201914004017 [Google Scholar]

[2] Borisenko, V., Kiselev, A., Leoro, L., Borovkov, A., & Boldyrev, Y. (2019). K&C suspension parameters stability by production tolerances. Paper presented at the E3S Web of Conferences, 140 doi:10.1051/e3sconf/201914007007 [Google Scholar]

[3] Ivanov, A., Abyzov, O., Galyshev, Y., & Rumyantsev, V. (2020). The performance test of the car catalytic converter in the conditions of urban operation. Paper presented at the E3S Web of Conferences, 164 doi:10.1051/e3sconf/202016403018 [Google Scholar]

[4] Klochkov, Y., Gazizulina, A., & Golovin, N. (2016). Assessment of organization development speed based on the analysis of standards efficiency. Paper presented at the Proceedings 2nd International Symposium on Stochastic Models in Reliability Engineering, Life Science, and Operations Management, SMRLO 2016, 530-532. doi:10.1109/SMRLO.2016.93 [Google Scholar]

[5] Korovkin, N., & Diop, C. Y. (2016). Minimization of electromagnetic fields intensity and optimization of electrical wiring networks in healthcare facilities. Paper presented at the Proceedings of the 2016 IEEE North West Russia Section Young Researchers in Electrical and Electronic Engineering Conference, EIConRusNW 2016, 604-607. doi:10.1109/EIConRusNW.2016.7448255 [Google Scholar]

[6] Kozlovsky, V., Klochkov, Y., Ostapenko, M., Ushanova, N., & Antipov, D. (2016). Conformity assessment of car quality databases exemplified on the case of the russian car manufacturer ’auto VAZ’. Paper presented at the 2016 5th International Conference on Reliability, Infocom Technologies and Optimization, ICRITO 2016: Trends and Future Directions, 57-60. doi:10.1109/ICRITO.2016.7784925 [Google Scholar]

[7] Kozlovsky, V. N., Lysov, V. E., Ermakov, V. V., Antipov, D. V., & Skripnuk, D. F. (2019). Calculation and statistical experiment on the monte carlo method when assessing the stability of the technical characteristics of the automobile generator set in mass production. Paper presented at the Proceedings of the 2019 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering, ElConRus 2019, 565-568. doi:10.1109/EIConRus.2019.8657034 [Google Scholar]

[8] Papirovskiy, A., Alekseev, S., Tarasov, A., & Borovkov, A. (2019). Development of numerical methods and virtual tests for cyclic durability by finite element method. Materials Physics and Mechanics, 42(6), 859-869. doi:10.18720/MPM.4262019_17 [Google Scholar]

[9] Rakov, V., Ivanov, V. N., Karpov, Y. G., Melehin, V. F., Izmailov, R. A., Yun, V. K., & Zaripova, D. A. (2019). Method for determining the basic energy characteristics of elements of a hybrid car engine. Paper presented at the IOP Conference Series: Earth and Environmental Science, 337(1) doi:10.1088/1755-1315/337/1/012066 [Google Scholar]

[10] Zeziulin, D. V., Yu Tyugin, D., Shashkina, K. M., Kuzmichev, V. A., & Beresnev, P. O. (2018). Autonomous electric commercial vehicle for difficult operating conditions. Paper presented at the IOP Conference Series: Materials Science and Engineering, 386(1) doi:10.1088/1757-899X/386/1/012003 [Google Scholar]