Open Access
E3S Web Conf.
Volume 328, 2021
International Conference on Science and Technology (ICST 2021)
Article Number 10002
Number of page(s) 5
Section Resilience Infrastucture and Society, Transportation System, Smart Structure and Construction, Sustainability Infrastructure
Published online 06 December 2021
  1. S. Hasita, A. Suddeepong, S. Horpibulsuk, W. Samingthong, A. Arulrajah, and A. Chinkulkijniwat, “Properties of Asphalt Concrete Using Aggregates Composed of Limestone and Steel Slag Blends,” J. Mater. Civ. Eng., vol. 32, no. 7, p. 06020007, (2020). [Google Scholar]
  2. J. R. Wu, Q. Y. Ma, and X. H. Dong, “Test and analysis on asphalt content for fatigue performance of polyester fiber asphalt concrete,” Mater. Sci. Forum, vol. 852, pp. 1488–1492, (2016). [CrossRef] [Google Scholar]
  3. M. R. Pouranian, M. A. Notani, M. T. Tabesh, B. Nazeri, and M. Shishehbor, “Rheological and environmental characteristics of crumb rubber asphalt binders containing non-foaming warm mix asphalt additives,” Constr. Build. Mater., vol. (238), p. 117707, (2020). [Google Scholar]
  4. K. Gao, F. Chen, H. Kuai, Z. Yang, Y. Si, and Z. Huo, “Laboratory experimental research on foamed warm mix asphalt mixture road property,” IOP Conf. Ser. Mater. Sci. Eng., vol. 774, no. 1, (2020). [Google Scholar]
  5. S. Kocak and M. E. Kutay, “Fatigue performance assessment of recycled tire rubber modified asphalt mixtures using viscoelastic continuum damage analysis and AASHTOWare pavement ME design,” Constr. Build. Mater., vol. (248), p. 118658, (2020). [Google Scholar]
  6. T. Chen, T. Ma, X. Huang, Y. Guan, Z. Zhang, and F. Tang, “The performance of hot-recycling asphalt binder containing crumb rubber modified asphalt based on physiochemical and rheological measurements,” Constr. Build. Mater., vol. 226, pp. 83–93, (2019). [Google Scholar]
  7. Y. Liu, Z. Xi, J. Cai, and H. Xie, “Laboratory investigation of the properties of epoxy asphalt rubber (EAR),” Mater. Struct. Constr., vol. 50, no. 5, (2017). [Google Scholar]
  8. V. Venudharan, K. P. Biligiri, and N. C. Das, “Investigations on behavioral characteristics of asphalt binder with crumb rubber modification: Rheological and thermo-chemical approach,” Constr. Build. Mater., vol. 181, pp. 455–464, (2018). [Google Scholar]
  9. V. H. Nanjegowda and K. P. Biligiri, “Recyclability of rubber in asphalt roadway systems: A review of applied research and advancement in technology,” Resour. Conserv. Recycl., vol. 155, no. December 2019, p. 104655, (2020). [Google Scholar]
  10. S. Chen, D. Ge, F. Gong, Z. You, A. Diab, and M. Ye, “Rheological properties and chemical characterisation of reacted and activated rubber modified asphalt binder,” Road Mater. Pavement Des., vol. 21, no. S1, pp. S140–S154, (2020). [Google Scholar]
  11. X. Ding, T. Ma, W. Zhang, and D. Zhang, “Experimental study of stable crumb rubber asphalt and asphalt mixture,” Constr. Build. Mater., vol. 157, pp. 975–981, (2017). [Google Scholar]
  12. J. Gong et al., “Performance evaluation of warm mix asphalt additive modified epoxy asphalt rubbers,” Constr. Build. Mater., vol. 204, pp. 288–295, (2019). [CrossRef] [Google Scholar]
  13. H. Wang, R. Zhang, Y. Chen, Z. You, and J. Fang, “Study on microstructure of rubberized recycled hot mix asphalt based X-ray CT technology,” Constr. Build. Mater., vol. 121, pp. 177–184, (2016). [Google Scholar]
  14. L. Zani, F. Giustozzi, and J. Harvey, “Effect of storage stability on chemical and rheological properties of polymer-modified asphalt binders for road pavement construction,” Constr. Build. Mater., vol. 145, pp. 326–335, (2017). [Google Scholar]
  15. H. Prastanto, Y. Firdaus, S. Puspitasari, A. Ramadhan, and A. F. Falaah, “Study of physical characteristic of rubberized hot mix asphalt based on various dosage of natural rubber latex and solid rubber,” IOP Conf. Ser. Mater. Sci. Eng., vol. 509, no. 1, (2019). [Google Scholar]
  16. A. I. B. Farouk et al., “Effects of mixture design variables on rubber–bitumen interaction: properties of dry mixed rubberized asphalt mixture,” Mater. Struct. Constr., vol. 50, no. 1, (2017). [Google Scholar]
  17. H. Yu et al., “Effect of mixing sequence on asphalt mixtures containing waste tire rubber and warm mix surfactants,” J. Clean. Prod., vol. 246, (2020). [Google Scholar]
  18. L. M. Ngwenya and S. O. Franklin, “Influence of Recycled Coarse Aggregate on some Properties of Fresh and Hardened Concrete,” Int. J. Innov. Sci. Eng. Technol., vol. 2, no. 12, pp. 257–264, (2015). [Google Scholar]
  19. F. Kaseer, A. E. Martin, and E. Arámbula-Mercado, “Use of recycling agents in asphalt mixtures with high recycled materials contents in the United States: A literature review,” Constr. Build. Mater., vol. 211, pp. 974–987, (2019). [Google Scholar]
  20. ASTM C 150, “Standard Specification for Portland Cement1,” p. 515, (2012). [Google Scholar]
  21. Y. Sheng, H. Li, J. Geng, Y. Tian, Z. Li, and R. Xiong, “Production and performance of desulfurized rubber asphalt binder,” Int. J. Pavement Res. Technol., vol. 10, no. 3, pp. 262–273, (2017). [Google Scholar]
  22. J. Sun, B. Wei, Y. Zhang, and J. Yang, “Experimental study on high-temperature stability of rubber powder-modified Asphalt mixture,” J. Phys. Conf. Ser., vol. 1605, no. 1, (2020). [Google Scholar]
  23. Marshall Mix Design and Analysis, “Marshall Mix Design and Analysis,” Marshall Mix Des. Anal., pp. 48–77, (2007). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.