Open Access
Issue
E3S Web Conf.
Volume 236, 2021
3rd International Conference on Energy Resources and Sustainable Development (ICERSD 2020)
Article Number 05007
Number of page(s) 6
Section Urban Environmental Architecture and Digital Design Application
DOI https://doi.org/10.1051/e3sconf/202123605007
Published online 09 February 2021
  1. Cui, Y., Xie, J., Liu, J.et al. (2017) A review on Phase Change material application in building. Advances in Mechanical Engineering, 9(6):1-15. [CrossRef] [Google Scholar]
  2. Zhang, J. J., Wang, Z. Y., Ding, M. Ming.et al. (2016) Influences of Facts Element with Energy Storage on Cascading Failures. Power System Protection and Control, 44(11):90-96. [Google Scholar]
  3. Guan, Y., Chen, C., Ling, H. S. et al. (2013) Analysis of Heat Transfer Properties of Three-Layer Wall with Phase-Change Heat Storage in Solar Greenhouse. Transactions of the Chinese Society of Agricultural Engineering, 29(21): 166-173. [Google Scholar]
  4. Yuan, Z. J., Zeng, H. Y. (2017) A Coupled Convective Commutative Value Method. Forum on Science and Technology in China. 2017: 54-55. [Google Scholar]
  5. Liu, F., Huang, L, K., Chen, Y. Z.et al. (2018) Concurrence of Phase Transition and Grain Growth in Nanocrystalline Metallic Materials. Acta Metallurgica Sinica, 54(11):1525-1536. [Google Scholar]
  6. Zhao, J. J., Zhou, J. H., Cui, Y. J.et al. (2019) Preparation and Thermal Properties of Nanoencapsulated Binary Phase Change Materials. Fine Chemicals, 36(06):1028-1035. [Google Scholar]
  7. Hu, X. D., Gao, X. N., Li, D. L.et al. (2013) Performance of Paraffin/Expanded Graphite Composite Phase Change Materials. CIESC Journal, 64(10):3831-3837. [Google Scholar]
  8. Guo, Y. L. (2019) Preparation and Properties of Phase Change Microcapsules/Silicone Rubber Composites. Southwest University of Science and Technology. [Google Scholar]
  9. Wei, G. S., Xing, L. J., Xiao, Z. et al. (2014) Research Status and Selection of Phase Change Thermal Energy Storage Materials for CSP Systems. Proceedings of the CSEE, 34(03):325-335. [Google Scholar]
  10. Zhang, R. Y. (2009) Phase Change Materials and Phase Change Energy Storage Technology. Science Press. Beijing. [Google Scholar]
  11. Xie, P. C., Yan, H., Yu, R. S. et al. (2012) Advances in Solid-Liquid Deformable Phase Change Materials Research. Discussion and Research, 2012(11):120-123. [Google Scholar]
  12. Wang, Z., Chen, L. G., Fu, L. et al. (2012) Preparation and Properties of Paraffin/Active Carbon Phase Change Materials. Plastics, 41(01):74-76. [Google Scholar]
  13. Souayfane, F., Fardoun, F., Biwole, P. et al. (2016) Phase change materials (PCM) for cooling applications in buildings: A review. Energy and Buildings, 129: 396-431. [Google Scholar]
  14. Sun, W. C., Feng, J. X., Zhang, Z. G. et al. (2020) Research progress of phase change heat storage technology for passive energy conservation in buildings. Chemical Industry and Engineering Progress, 39(5):1-14. [Google Scholar]
  15. Wei, D. W., Han, S. N., Shen, X. (2016) Solid-liquid phase equilibria of (n-octadecane with myristic, and palmitic acid) binary mixtures used as phase change materials (PCMs). Journal Of Chemical Thermodynamics, 101: 7-11. [Google Scholar]
  16. Ghadim, H. B., Shahbaz, K., Al-Shannaq, R. et al. (2019) Binary mixtures of fatty alcohols and fatty acid esters as novel solid-liquid phase change materials. International Journal of Energy Research, 43:8536-8547 [Google Scholar]
  17. Jia, P. Y., Wu, W. D., Wang, Y. C. et al. (2019) Preparation and Thermophysical Property Optimization of A New Composite Phase Change Material For Cold Storage. Journal of Chemical Industry and Engineering (China), 70: 2758-2765. [Google Scholar]
  18. Ban, F. C., Lu, L. X., Pan, L. et al. (2019) Preparation and Performance of freeze type composite phase change material. New Chemical Materials, 47 (05):218-221+226. [Google Scholar]
  19. Jiang, Y. Y., Zhou, C. L., Liu, Z.M. et al. (2019) Facile Preparation of Calcium Stearoyl Lactylate as Solid-Liquid Phase Change Materials with Improved Form Stability and Adjustable Phase Transition Temperature for Thermal Comfort. Environmental Progress & Sustainable Energy, 38(4): 1944-7442. [Google Scholar]
  20. Jia, P. Y., Wu, W. D., Wang, Y. C. et al. (2019) Preparation of 0 ℃ Phase Change Material and Its Cold Storage Performance in Cold-Chain Logistics. Chemical Industry and Engineering Progress, 38(06):2862-2869. [Google Scholar]
  21. Zhang, P., Zhang, G. Q., Tang, Y. N. et al. (2018) Preparation of Phase Change Material Based on Nano-TiO2/wax Emulsion and Its Thermal Conductive Properties. Journal of Hunan University, 45(12):117-123. [Google Scholar]
  22. Ke, H.Z. (2017) Phase diagrams, eutectic mass ratios and thermal energy storage properties of multiple fatty acid eutectics as novel solid-liquid phase change materials for storage and retrieval of thermal energy. Applied Thermal Engineering, 113: 1319-1331. [Google Scholar]
  23. Liang, T., Lu, L. X., Qiu, X. L. et al. (2016) Study on preparation of starch super absorbent polymer and property as a phase change cold storage material. New Chemical Materials, 44(06):261-263. [Google Scholar]
  24. Huang, X., Ying, D., Guo, Q. et al. (2015) Kinetic Study on Solid-Liquid Transitions of Fatty Acids Ternary Mixtures Phase Change Materials. New Chemical Materials, 43(08):149-151. [Google Scholar]
  25. Bicer, A., Sari, A., Lafci, O. et al. (2015) Thermal Energy Storage Properties of Xylitol Penta Myristate and Xylitol Penta Laurate as Novel Solid-liquid Phase Change Materials. Energy Sources Part A-Recovery Utilization and Environmental Effects, 37: 2702-2709. [Google Scholar]
  26. Hirmiz, R., Teamah, H. M., Lightstone, M.F., et al. (2019) Performance of heat pump integrated phase change material thermal storage for electric load shifting in building demand side management. Energy and Buildings, 190: 103-118. [Google Scholar]
  27. Plytaria, M., Tzivanidis, C., Bellos, E. et al. (2018) Energetic investigation of solar assisted heat pump underfloor heating systems with and without phase change materials. Energy Conversion and Management, 173: 626-639. [Google Scholar]
  28. Alvarez, S., Cabeza, L., Ruiz-Pardo, A. et al. (2013) Building integration of PCM for natural cooling of buildings. In: 12th International Conference on Energy Storage Innostock. Lleida, SPAIN. 514-522. [Google Scholar]
  29. Ling, H., Wang, L., Chen, Chao. (2019) Numerical investigations of optimal phase change material incorporated into ventilated walls. Energy, 172: 1187-1197. [Google Scholar]
  30. Stazi, F., Mastrucci, A., Perna, C. (2012) The behaviour of solar walls in residential buildings with different insulation levels: An experimental and numerical study. Energy and Buildings, 47: 217-229. [Google Scholar]
  31. Wang, B. Y., Han, Z. T., Liu, S. G.et al. (2019) Properties of Organic Phase Change Materials for Air Conditioning Condensation Heat Recovery System. Building Energy & Environment, 38:50-52. [Google Scholar]
  32. Yuan, Y. G. (2015) An experimental research for the heat storage property of recovery phase change device used for condensing heat in air-conditioning system. Southwest Jiaotong University. [Google Scholar]
  33. Wan C. (2010) Numerical and Experimental Study on Ice-On-Coil Storage Tank. D. Central South University. [Google Scholar]
  34. Li, Z. N., Zhao, Y. J., Fan, Y. R. (2018) Research progress of phase change cold storage slurry materials. Chemical Industry and Engineering Progress, 37(S1):108-116. [Google Scholar]
  35. Zhu, M. G. (2018) The Study of Effect of Organic Phase Change Materials on Hydrate Formation. Suzhou University of Science and Technology. [Google Scholar]
  36. Zhu, M. G., Sun, Z. G., Yang, M. M.et al. (2017) Experimental Study on Promoting HCFC-141b Hydrate Formation with Organic Phase Change Material. Chemical Industry and Engineering Progress, 36:1265-1269. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.