Open Access
E3S Web Conf.
Volume 244, 2021
XXII International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies (EMMFT-2020)
Article Number 04001
Number of page(s) 8
Section Use and Conservation of Natural Resources
Published online 19 March 2021
  1. G. N. Kravchenko, K. G. Kravchenko, I. V. Gerasimov, Recovery of fatigue life of 30HGSN2A steel aircraft parts by repeated shot peening, Journal of Physics: Conference Series, 1399 (4) (2019) [Google Scholar]
  2. G. N. Kravchenko, K. G. Kravchenko, Restoring the Fatigue Life of Surface-Hardened Airplane Parts by Repeated Shot Hardening. ISSN 1068-798X, Russian Engineering Research, 40 (2020) [Google Scholar]
  3. Y. Deniskin, P. Miroshnichenko, A. Smolyaninov, Geometric modeling of surfaces dependent cross sections in the tasks of spinning and laying, E3S Web of Conferences (2019) DOI: 10.1051/e3sconf/201911001057 [Google Scholar]
  4. I. Pocebneva, Y. Deniskin, A. Yerokhin, V. Artiukh, V. Vershinin, Simulation of an aerodynamic profile with sections of ad hoc concavity, E3S Web of Conferences, 110, 01074 [Google Scholar]
  5. Y. I. Bityukov, Y. I. Deniskin, I. V. Pocebneva, Construction of Smooth Biorthogonal Waves on Triangulated Spaces, Proceedings - 2019 International Russian Automation Conference, RusAutoCon (2019) DOI: 10.1109/RUSAUTOCON.2019.8867785 [Google Scholar]
  6. E. Matys, Y. Deniskin, E. Stativa, D. Shlychkov, Special features of obtaining fine powders for additive technologies, E3S Web of Conferences (2019) DOI: 10.1051/e3sconf/201911001057 [Google Scholar]
  7. I. M. Artamonov, A. R. Deniskina, Yu. I. Deniskin, Formation of a single information object for targeted solutions in the aerospace industry, Science Industry Defense Proceedings of the XIX All-Russian Scientific and Technical Conference: in 4 volumes. Ed. S.D. Salenko, 57–61 (2018) [Google Scholar]
  8. Y. I. Bityukov, Y. I. Deniskin, Chaikin algorithm and its generalization, 2016 Dynamics of Systems, Mechanisms and Machines, Dynamics, 7818981 (2016) [Google Scholar]
  9. Y. I. Bityukov, Y. I. Deniskin, G. Y. Deniskina, Spline wavelets use for output processes analysis of multi-dimensional non-stationary linear control systems, Journal of Physics: Conference Series, 944(1), 012018 [CrossRef] [Google Scholar]
  10. A. V. Smolyaninov, I. V. Pocebneva, L. V. Chernenkaya, Mathematical Model of Asynchronous Motor with Frequency-Cascade Regulation, Proceedings 2019 International Russian Automation Conference, RusAutoCon 8867604 (2019) [Google Scholar]
  11. O. Dolgov, S. Bibikov, I. Pocebneva, Elements of the synthesis method for the layout of a front-line aircraft, E3S Web of Conference, 110, 01068 (2019) [Google Scholar]
  12. V. E. Mager, V. E. Belousov, E. N. Desyatirikova, S. A. Ivanov, I. V. Pocebneva, Information processing algorithm at creation of optimum structure of the self-adjusted technical system in quality parameters, Proceedings of 2017 IEEE 2nd International Conference on Control in Technical Systems, CTS, 8109503, 114–117 (2017) [Google Scholar]
  13. E. N. Desyatirikova, L. V. Chernenkaya, V. E. Mager, Subsystem for On-line Diagnostics of Cutting Process in Flexible Manufacturing, Proceedings - 2019 International Russian Automation Conference, RusAutoCon, 8867814 (2019) [Google Scholar]
  14. E. N. Desyatirikova, L. V. Chernenkaya, V. E. Mager, Method of calculating a priori reliability of elements of complex system, International Russian Automation Conference, RusAutoCon 8501747 (2018) [Google Scholar]
  15. G. N. Kravchenko, Yu. I. Popov, K. G. Kravchenko, Probability prediction of the appearance of overload cycles of variable load case in parts of the aircraft chassis, IOP Conference Series: Materials Science and Engineering, 734(1), 012014 [Google Scholar]
  16. E. Protopopov, S. Dobrykh, Y. Trofimova, P. Malenko, A. Valter, A. Protopopov, Reflection of strengthening results in values of generalized degrees of metallicity and covalence is principle to new strategy of designing alloys, Scientific Reports, 10 (1), 2050 (2020) [Google Scholar]
  17. A. Dehghani, F. Aslani, The synergistic effects of shape memory alloy, steel, and carbon fibres with polyvinyl alcohol fibres in hybrid strain-hardening cementitious composites, Construction and Building Materials, 252, 119061 (2020) [Google Scholar]
  18. S. S. M. Tavares, R. T. Batista, R. V. Landim, J. A. C. Velasco, L. F. Senna, Investigation of the effect of low temperature aging on the mechanical properties and susceptibility to sulfide stress corrosion cracking of 22%Cr duplex stainless steel, Engineering Failure Analysis, 113, 104553 (2020) [Google Scholar]
  19. M. Yakhchalian, N. Asgarkhani, M. Yakhchalian, Evaluation of deflection amplification factor for steel buckling restrained braced frames, Journal of Building Engineering, 30, 101228 (2020) [Google Scholar]
  20. J. Chen, H. Liu, T.-M. Chan, Material properties and residual stresses of cold-formed octagonal hollow sections, Journal of Constructional Steel Research, 170, 106078 (2020) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.