EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 246 (2021) E3S Web Conf., 246 (2021) 10004 References
Open Access
Issue
E3S Web Conf.
Volume 246, 2021
Cold Climate HVAC & Energy 2021
Article Number 10004
Number of page(s) 8
Section Performance Assessment and Characterization
DOI https://doi.org/10.1051/e3sconf/202124610004
Published online 29 March 2021
  1. “Directive 2012/27/EU of the European Parliament and of the Council of 25 October 2012 on energy efficiency (EED),” European Union Law. Oct-2012. [Google Scholar]
  2. European Parliament and European Council, “Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings,” Off. J. Eur. Union, vol. 2010, no. L 153, pp. 13–35, 2010. [Google Scholar]
  3. “Consumption of Energy.” Eurostat, 2016. [Google Scholar]
  4. D. Calì, T. Osterhage, and D. Müller, “Rebound effect related to retrofit solutions for residential housing : monitoring data from a field test,” Proc. SB11 Helsinki World Sustain. Build. Conf., pp. 104–113, 2011. [Google Scholar]
  5. D. Calì, T. Osterhage, R. Streblow, and D. Müller, “Energy performance gap in refurbished German dwellings: Lessonlearned from a field test,” Energy Build., no. 127, pp. 1–13, 2016. [Google Scholar]
  6. A. L. Pisello, C. Piselli, and F. Cotana, “Influence of human behavior on cool roof effect for summer cooling,” Build. Environ., no. 88, pp. 116–128, 2015. [Google Scholar]
  7. R. Haas and P. Biermayr, “The rebound effect for space heating Empirical evidence from Austria,” Energy Policy, no. 6–7, pp. 403–410, 2000. [Google Scholar]
  8. L. Tronchin and K. Fabbri, “Energy performance building evaluation in Mediterranean countries: Comparison between software simulations and operating rating simulation,” Energy Build., vol. 40, no. 7, pp. 1176–1187, 2008. [Google Scholar]
  9. S. T. Emmerich, A. K. Persily, and T. P. McDowell, “Impact of commercial building infiltration on heating and cooling loads in US office buildings,” 26th AIVC Conf. "Ventilation Relat. to energy Perform. Build., no. 1998, 2005. [Google Scholar]
  10. J. Straube, “Air Leaks – How They Waste Energy and Rot Houses,” Fine Home Building, The Taunton Press, no. October/November, pp. 45–49, 2012. [Google Scholar]
  11. H. B. Awbi, Ventilation of buildings. Taylor & Francis, 2003. [Google Scholar]
  12. Trafik- Bygge- og Boligstyrelsen, “The Danish National Building Code, BR18,” 2021. [Online]. Available: https://bygningsreglementet.dk/. [Accessed: 13-Jan-2021]. [Google Scholar]
  13. S. Frederiksen and G. Clasen, “En blower door-test kan tjekke, om dit nye hus er utæt,” Videncentret Bolius, 2020. [Online]. Available: https://www.bolius.dk/brug-en-blower-doortest- til-at-tjekke-om-dit-nye-hus-er-utaet-19673. [Accessed: 13-Jan-2021]. [Google Scholar]
  14. C. Rasmussen, “Data-driven Methods for Reliable Energy Performance Characterisation of Occupied Buildings,” The Technical University of Denmark, 2020. [Google Scholar]
  15. M. J. Jiménez, H. Madsen, and K. K. Andersen, “Identification of the main thermal characteristics of building components using MATLAB,” Build. Environ., vol. 43, no. 2, pp. 170–180, 2008. [Google Scholar]
  16. J. P. Real et al., “Characterisation of thermal energy dynamics of residential buildings with scarce data,” Energy Build., vol. 230, p. 110530. [Google Scholar]
  17. C. Rasmussen, L. Frölke, P. Bacher, H. Madsen, and C. Rode, “Semi-parametric modelling of sun position dependent solar gain using B-splines in grey-box models,” Sol. Energy, vol. 195, pp. 249–258, 2020. [Google Scholar]
  18. P. Bacher and H. Madsen, “Identifying suitable models for the heat dynamics of buildings,” Energy Build., vol. 43, no. 7, pp. 1511–1522, 2011. [Google Scholar]
  19. M. F. Fels and others, “PRISM: An introduction,” Energy Build., vol. 9, no. 1–2, pp. 5–18, 1986. [Google Scholar]
  20. S. Hammarsten, “A critical appraisal of energy-signature models,” Appl. Energy, vol. 26, no. 2, pp. 97–110, 1987. [Google Scholar]
  21. C. Rasmussen, P. Bacher, D. Calì, H. A. Nielsen, and H. Madsen, “Method for scalable and automatised thermal building performance documentation and screening,” Energies, vol. 13, no. 15, pp. 1–23, 2020. [Google Scholar]
  22. I. S. Walker and D. J. Wilson, “The Alberta Air Infiltration Model,” Alberta, 1990. [Google Scholar]
  23. D. Van Orshoven and A. Tilmans, “Methods in the national EPB-calculation procedures to determine the ventilation heat transfer coefficient,” no. March, 2010. [Google Scholar]
  24. S. Aggerholm and K. Grau, “Bygningers energibehov-SBi-anvisning 213,” Build. Res. Institute, Aalborg Univ. Hørsholm, Denmark, 2008. [Google Scholar]
  25. H. R. Trechsel and P. L. Lagus, Measured air leakage of buildings: a symposium, vol. 904. ASTM International, 1986. [CrossRef] [Google Scholar]
  26. “EN 13829: Thermal performance of buildings – Determination of air permeability of buildings – Fan pressurization method.” Danish Standard, 2000. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.