EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 248 (2021) E3S Web Conf., 248 (2021) 01050 References
Open Access
Issue
E3S Web Conf.
Volume 248, 2021
2021 3rd International Conference on Civil Architecture and Energy Science (CAES 2021)
Article Number 01050
Number of page(s) 4
Section Chemical Performance Structure Research and Environmental Pollution Control
DOI https://doi.org/10.1051/e3sconf/202124801050
Published online 12 April 2021
  1. Qiao Chengren, GuoHang, Ye Fang, Ma Heavyfang. PEMFC anode diffusion layer surface temperature and heat flow density joint measurement[J]. Journal of Engineering Thermophysics, 2020, 41 (07): 1792–1796. [Google Scholar]
  2. Zhang Min. 75kW proton exchange membrane fuel cell test bench thermal system design[J]. Agricultural Equipment and Vehicle Engineering, 2017, 55 (08): 15–18. [Google Scholar]
  3. KITAGAWA Y, KATO K, FUKUI M. Analysis and experimentation for effective cooling of li-ion Batteries[J]. Procedia Technology, 2014, 18: 63–67. [Google Scholar]
  4. WANG T, TSENG K J, ZHAO J Y, et al. Thermal investigation of lithium-ion battery module with different cell arrangement structures and forced air-cooling strategies[J]. Applied Energy, 2014, 134: 229–238. [CrossRef] [Google Scholar]
  5. SUN H G, DIXON R. Development of cooling strategy for an air cooled lithium-ion battery pack[J]. Journal of Power Sources, 2014, 272(5):404–414. [Google Scholar]
  6. TONG W, SOMASUNDARAM K, BIRGERSSON E, et al. Numerical investigation of water cooling for a lithium-ion bipolar battery pack[J]. International Journal of Thermal Sciences, 2015, 94:259–269. [Google Scholar]
  7. LAN C J, XU J, QIAO Y, et al. Thermal management for high power lithium-ion battery by minichannel aluminum tubes[J]. Applied Thermal Engineering, 2016:284–292. [Google Scholar]
  8. PANCHAL S, KHASOW R, DINCER I, et al. Thermal design and simulation of mini-channel cold plate for water cooled large sized prismatic lithium-ion battery[J]. Applied Thermal Engineering, 2017, 122:80–90. [Google Scholar]
  9. KIZILEL R, LATEEF A, SABBAH R, et al. Passive control of temperature excursion and uniformity in high-energy li-ion battery packs at high current and ambient temperature [J]. Journal of Power Sources, 2008, 183(1): 370–375. [Google Scholar]
  10. DUAN X, NATERERB G F. Heat transfer in phase change materials for thermal management of electric vehicle battery modules[J]. International Journal of Heat and Mass Transfer, 2010, 53(23–24):5176–5182. [Google Scholar]
  11. RAO Z H, WANG S F, ZHANG G Q. Simulation and experiment of thermal energy management with phase change material for ageing LiFePO4 power battery[J]. Energy Conversion & Management, 2011, 52(12):3408–3414. [Google Scholar]
  12. Sun Shiliang, Zheng Liqiu, Sun Shimei. Feasibility Study of Thermal Tube Technology for Fuel Cell Thermal Management Systems[J]. Journal of Jilin Institute of Construction Engineering, 2011, 28 (02): 40–42. [Google Scholar]
  13. Xie Wen, Liu Jianfeng, Ma Yongjie, Li Peng, Li Leilei, Zhang Yuliang. Research on the thermal management technology of proton exchange membrane fuel cells for the space environment[J]. Electromechanical product development and innovation, 2017, 30 (05): 9–11. [Google Scholar]
  14. SUMANB, KUMARP. An analytical model for fluid flow and heat transfer in a micro-heat pipe of polygonal shape [J]. Int J Heat Mass Transfer, 2005, 48(21–22): 4498–4509. [Google Scholar]
  15. OROMV, BAZZOE. Flat heat pipes for potential application in fuel cell cooling[J]. Applied Thermal Engineering, 2015, 90:848–857. [Google Scholar]
  16. Akachi H. Structure of a heat pipe: USA, 4921041[P]. 1990–05–01. [Google Scholar]
  17. Akachi H. Structure of micro heat pipe: USA, 5219020[P]. 1993- 06–15 [Google Scholar]
  18. Akachi H. L type heat pipe: USA, 5490558[P]. 1996–02–13. [Google Scholar]
  19. Cao Weijia. Pulsation heat pipe heat exchanger heat transfer performance and engineering application technology research[D]. Changchun Institute of Engineering, 2015. [Google Scholar]
  20. Zhang Ziwen. Study on the flow and heat transmission characteristics of pulsation heat tubes and the rest of the heat recovery applications[D]. Southeast University, 2019. [Google Scholar]
  21. Zhou Hua. Study on the flow and heat transmission performance of pulsation heat tubes in vibrational states[D]. Suzhou University of Science and Technology, 2019. [Google Scholar]
  22. Qu Jian. Advances in the research and application of pulsation heat tube technology[J]. Chemical advances, 2013, (01): 33–41. [Google Scholar]
  23. Fan Shilong. Experimental research and application of thermal transmission performance of pulsation heat pipe heat dissipation device[D]. Changchun Institute of Engineering, 2020. [Google Scholar]
  24. Qu Jian. Advances in the research and application of pulsation heat tube technology[J]. Chemical advances, 2013, (01): 33–41. [Google Scholar]
  25. F. Barbir, Fuel cell stack design principles with some design concepts of micromini fuel cells, in: NATO Science for Peace and Security Series (2008) 27e46. [Google Scholar]
  26. Jason Clement, Xia Wang. Experimental investigation of pulsating heat pipe performance with regard to fuel cell cooling application[J]. Applied Thermal Engineering, 2013, 50(1). [Google Scholar]
  27. Zhang Dongwei, Jiang Yihui, Zhou Junjie, Shen Chao, Xu Rongji, Yang Shaolun. Advances in the research of pulsation heat tube intensive heat transmission technology[J]. Science, Technology and Engineering, 2019, 19 (21): 1–7. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.