Open Access
Issue
E3S Web Conf.
Volume 252, 2021
2021 International Conference on Power Grid System and Green Energy (PGSGE 2021)
Article Number 03052
Number of page(s) 6
Section Energy Technology Research and Development and Green Energy-Saving Applications
DOI https://doi.org/10.1051/e3sconf/202125203052
Published online 23 April 2021
  1. Urge-Vorsatz, D.; Cabeza, L.F.; Serrano, S.; Barreneche, C.; Petrichenko, K. Heating and cooling energy trends and drivers in buildings [J]. Renew. Sustain. Energy Rev. 2015, 41: 85–98. [Google Scholar]
  2. Liao, S.; Yao, W.; Han, X.; Wen, J.; Cheng, S. Chronological operation simulation framework for regional power system under high penetration of renewable energy using meteorological data [J]. Appl. Energy 2017, 203, 816–828. [Google Scholar]
  3. Lo Basso, G.; Rosa, F.; Astiaso Garcia, D.; Cumo, F. Hybrid systems adoption for lowering historic buildings PFEC (primary fossil energy consumption)—A comparative energy analysis. Renew [J]. Energy 2018, 117, 414–433. [Google Scholar]
  4. Tronchin, L.; Manfren, M.; Tagliabue, L.C. Optimization of building energy performance by means of multi-scale analysis—Lessons learned from case studies [J]. Sustain. Cities Soc. 2016, 27, 296–306. [Google Scholar]
  5. Noussan, M.; Jarre, M.; Roberto, R.; Russolillo, D. Combined vs Separate Heat and Power Production—Primary Energy comparison in high renewable share contexts [J]. Appl. Energy 2018, 213, 1–10. [Google Scholar]
  6. Rovense, F.; Amelio, M.; Ferraro, V.; Scornaienchi, N. M. Analysis of a concentrating solar power tower operating with a closed Joule Brayton cycle and thermal storage [J]. Int. J. Heat Technol. 2016, 34, 485–490. [Google Scholar]
  7. Pisello, A.L.; Rosso, F.; Castaldo, V.L.; Piselli, C.; Fabiani, C.; Cotana, F. The role of building occupants’ education in their resilience to climate-change related events [J]. Energy Build. 2017, 154, 217–231. [Google Scholar]
  8. Miranda, M.T.; Montero, I.; Sepúlveda, F.J.; Arranz, J.I.; Rojas, C.V. Design and Implementation of a Data Acquisition System for Combustion Tests [J]. Energies 2017, 10, 630. [Google Scholar]
  9. Barbeito, I.; Zaragoza, S.; Tarrio-Saavedra, J.; Naya, S. Assessing thermal comfort and energy efficiency in buildings by statistical quality control for autocorrelated data [J]. Appl. Energy 2017, 190, 1–17. [Google Scholar]
  10. Manfren, M.; Aste, N.; Moshksar, R. Calibration and uncertainty analysis for computer models—A meta-model based approach for integrated building energy simulation [J]. Appl. Energy 2013, 103, 627–641. [Google Scholar]
  11. Cheng, H.; Wang, X.; Zhou, M. Optimized Design and Feasibility of a Heating System with Energy Storage by Pebble Bed in a Solar Attic [J]. Energies 2017, 10, 328. [Google Scholar]
  12. Turhan, C.; Simani, S.; Zajic, I.; Akkurt, G.G. Performance Analysis of Data-Driven and Model-Based Control Strategies Applied to a Thermal Unit Model [J]. Energies 2017, 10, 67. [Google Scholar]
  13. Sarkar, P.; Kortela, J.; Boriouchkine, A.; Zattoni, E.; Jämsä-Jounela, S.-L. Data-Reconciliation Based Fault-Tolerant Model Predictive Control for a Biomass Boiler [J]. Energies 2017, 10, 194. [Google Scholar]
  14. Glasgo, B.; Hendrickson, C.; Azevedo, I.L. Assessing the value of information in residential building simulation: Comparing simulated and actual building loads at the circuit level [J]. Appl. Energy 2017, 203, 348–363. [Google Scholar]
  15. Castellani, B.; Rinaldi, S.; Bonamente, E.; Nicolini, A.; Rossi, F.; Cotana, F. Carbon and energy footprint of the hydrate-based biogas upgrading process integrated with CO2 valorization [J]. Sci. Total Environ. 2018, 615, 404–411. [PubMed] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.