Research on the Increase of Mineral Dissociation Degree by High Pressure Water Jet

Open Access

Issue		E3S Web Conf. Volume 261, 2021 2021 7^th International Conference on Energy Materials and Environment Engineering (ICEMEE 2021)


Article Number		02060
Number of page(s)		7
Section		Energy Chemistry Performance and Material Structure Analysis
DOI		https://doi.org/10.1051/e3sconf/202126102060
Published online		21 May 2021

Urakaev F K, Yusupov T S. Numeric Evaluation of Kinematic and Dynamic Characteristics of Mineral Treatment in Disintegrator[J]. Journal of Mining Science, 2017, 53(1): 133-140. [Google Scholar]
Wang J, Jiang T, Liu Y, et al. Influence of microwave treatment on grinding and dissociation characteristics of vanadium titano-magnetite[J]. International Journal of Minerals, Metallurgy, and Materials, 2019, 26(2): 160-167. [Google Scholar]
Sakamoto Y, Nakano Y, Kaneko F, et al. Numerical Simulation of a Laboratory-scale Experiment for the Hydrate Dissociation Process in Porous Media by Acid Injection[J]. International Journal of Offshore and Polar Engineering, 2020, 30(4): 501-512. [Google Scholar]
He H, Cao J, Duan N. Novel bead-milling mechanically pulverized bulk mineral particles to ultrafine scale: Energy storage and cleaner promotion of mineral extraction[J]. Journal of cleaner production, 2018, 198(3): 46-53. [Google Scholar]
Munoz-Santiburcio D, Marx D. Nanoconfinement in slit pores enhances water self-dissociation[J]. Physical review letters, 2017, 119(5): 56-59. [Google Scholar]
Chen X, Espinoza D N. Surface area controls gas hydrate dissociation kinetics in porous media[J]. Fuel, 2018, 234(7): 358-363. [CrossRef] [Google Scholar]
Kashim M Z, Tsegab H, Rahmani O, et al. Reaction Mechanism of Wollastonite In Situ Mineral Carbonation for CO2 Sequestration: Effects of Saline Conditions, Temperature, and Pressure[J]. ACS omega, 2020, 5(45): 28942-28954. [CrossRef] [PubMed] [Google Scholar]
Jangid A K, Malik P, Singh M. Mineral acid monitored physicochemical studies of oil-in-water nanoemulsions[J]. Journal of Molecular Liquids, 2018, 259(11): 439-452. [Google Scholar]
Tollan P, Hermann J. Arc magmas oxidized by water dissociation and hydrogen incorporation in orthopyroxene[J]. Nature geoscience, 2019, 12(8): 667-671. [CrossRef] [PubMed] [Google Scholar]
Li K, Chen J, Peng J, et al. Efficient improvement for dissociation behavior and thermal decomposition of manganese ore by microwave calcination[J]. Journal of Cleaner Production, 2020, 260(1): 121-124. [Google Scholar]
Lazo D E, Dyer L G, Alorro R D. Silicate, phosphate and carbonate mineral dissolution behaviour in the presence of organic acids: A review[J]. Minerals Engineering, 2017, 100(21): 115-123. [Google Scholar]
[12] Cavosie A J, Timms N E, Ferrière L, et al. FRIGN zircon—The only terrestrial mineral diagnostic of high-pressure and high-temperature shock deformation[J]. Geology, 2018, 46(10): 891-894. [Google Scholar]
Laporte S, Pietrucci F, Guyot F, et al. Formic Acid Synthesis in a Water–Mineral System: Major Role of the Interface[J]. The Journal of Physical Chemistry C, 2020, 124(9): 5125-5131. [Google Scholar]
Zhang Y, Liu L, Wang D, et al. Application of lowfield nuclear magnetic resonance (lfnmr) in characterizing the dissociation of gas hydrate in a porous media[J]. Energy & Fuels, 2021, 35(3): 2174-2182. [Google Scholar]
Wu Y, Lv Z, Shang L, et al. The stability and coalescence of hydrate in mineral oil emulsion[J]. Petroleum Science and Technology, 2020, 38(18): 883-890. [Google Scholar]
Zhao J, Zhang G, Xu Y, et al. Enhancing rate of penetration in a tight formation with high-pressure water jet (HPWJ) via a downhole pressurized drilling tool[J]. Journal of Petroleum Science and Engineering, 2019, 174: 1194-1207. [Google Scholar]
Jiang H, Zhao H, Gao K, et al. Numerical investigation of hard rock breakage by high-pressure water jet assisted indenter impact using the coupled SPH/FEM method[J]. Powder Technology, 2020, 376: 176-186. [Google Scholar]
Ning D, Wang Q, Tian J, et al. Experimental Study on the Coating Removing Characteristics of HighPressure Water Jet by Micro Jet Flow[J]. Micromachines, 2021, 12(2): 173. [CrossRef] [PubMed] [Google Scholar]
Fiore N, Caro S, D’Andrea A, et al. Evaluation of bitumen modification with crumb rubber obtained through a high pressure water jet (HPWJ) process[J]. Construction and Building Materials, 2017, 151: 682-691. [Google Scholar]
Ayed Y, Germain G. High-pressure water-jet-assisted machining of Ti555-3 titanium alloy: investigation of tool wear mechanisms[J]. The International Journal of Advanced Manufacturing Technology, 2018, 96(1): 845-856. [Google Scholar]
Kang Z, Zhang Z, Deng J, et al. Experimental Research of High-Temperature and High-Pressure Water Jet Characteristics in ICRC Engine Relevant Conditions[J]. Energies, 2019, 12(9): 1763. [Google Scholar]
Zhou M, Liu H, Kang C, et al. Resistance of curved surfaces to the cavitation erosion produced through high-pressure submerged waterjet[J]. Wear, 2019, 440: 203091. [Google Scholar]
Latchoumi T P, Balamurugan K, Dinesh K, et al. Particle swarm optimization approach for waterjet cavitation peening[J]. Measurement, 2019, 141: 184-189. [Google Scholar]
Perec A. Experimental research into alternative abrasive material for the abrasive water-jet cutting of titanium[J]. The International Journal of Advanced Manufacturing Technology, 2018, 97(1): 1529-1540. [Google Scholar]
Chen X, Li X, Song W, et al. Effects of a low-pressure water jet assisting the laser etching of polycrystalline silicon[J]. Applied Physics A, 2018, 124(8): 1-14. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.