Building a nomogram to predict maximum temperature in mass concrete at an early age

Trong - Chuc Nguyen; Van - Quang Nguyen; Nikolay Aniskin; Ba - Thang Phung; Quoc - Long Hoang

doi:10.1051/e3sconf/202126301008

All issues

Volume 263 (2021)

E3S Web Conf., 263 (2021) 01008

References

Open Access

Issue		E3S Web Conf. Volume 263, 2021 XXIV International Scientific Conference “Construction the Formation of Living Environment” (FORM-2021)


Article Number		01008
Number of page(s)		10
Section		Modern Building Materials
DOI		https://doi.org/10.1051/e3sconf/202126301008
Published online		28 May 2021

ACI 207.1R-96, Mass Concrete (Reported by ACI Committee 207, 1996) [Google Scholar]
ACI 207. 1R-05, Guide to Mass Concrete (Reported by ACI Committee 207, 2005) [Google Scholar]
ACI 207.2R-07, Report on Thermal and Volume change effects on Cracking of Mass Concrete (Reported by ACI Committee 207, 2007) [Google Scholar]
N. Aniskin, T.C. Nguyen, IOP Conf. Ser.: Mater. Sci. Eng. 1030 012144 (2021) [CrossRef] [Google Scholar]
J.K. Kim, K.H. Kim, J.K. Yang, Comp. & Struc. 79(2), 163–171 (2001) [CrossRef] [Google Scholar]
S.G. Kim, Effect of heat generation from cement hydration on mass concrete placement (Graduate Theses and Dissertations, Iowa State University, 2010) [Google Scholar]
Japan Concrete Institute, Guidelines for Control of Cracking of Mass Concrete (Reported by JCI Committee, 2016) [Google Scholar]
TCXDVN 305:2004, Mass concrete - code of practice of construction and acceptance (Vietnam, 2004) [Google Scholar]
N.A. Aniskin, T.C. Nguyen, Vestnik MGSU [Monthly J. on Constr. and Arch.] 15(3), 380–398 (2020) [CrossRef] [Google Scholar]
P.B. Bamforth, Early-age thermal crack control in concrete (CIRIA C660, London, 2007) [Google Scholar]
X. Liu, C. Zhang, X. Chang, W. Zhou, Y. Cheng, Y. Duan, Appl. Ther. E. 78, 449–459 (2015) [CrossRef] [Google Scholar]
M. H. Lee, Y.S. Chae, B.S. Khil, H.D. Yun, Appl. Mech. and Mater. 525, 478–481 (2014) [CrossRef] [Google Scholar]
X. Bai, J. Li, Q. Pan, Appl. Mech. and Mater. 438-439, 569–572 (2013) [Google Scholar]
N. Aniskin, T.C. Nguyen, IOP Conf. Series: Mater. Sci. E. 869 072028 (2020) [Google Scholar]
Zhu Bofang, Thermal stresses and temperature control of mass concrete (Published by Elsevier Inc, 2014) [Google Scholar]
B. Klemczak, A. Żmij, Mater. 14, 477 (2021) [Google Scholar]
T.C. Nguyen, N.K. Ho, H.H. Tran., J. Sci. Tech. Civ. E., NUCE. 14(5V), 27–38 (2020) [Google Scholar]
N. Aniskin, T.C. Nguyen, Q.L. Hoang, MATEC Web of Conf. 251, 02014 (2018) [Google Scholar]
ACI-318-11, Building code requirement for structural concrete (ACI 318-11) and commentary (Reported by ACI Committee 318, 2011) [Google Scholar]
American Association of State Highway and Transportation Officials (AASHTO), AASHTO LRFD Bridge Design Specifications (American, 2017) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] ACI 207.1R-96, Mass Concrete (Reported by ACI Committee 207, 1996) [Google Scholar]

[2] ACI 207. 1R-05, Guide to Mass Concrete (Reported by ACI Committee 207, 2005) [Google Scholar]

[3] ACI 207.2R-07, Report on Thermal and Volume change effects on Cracking of Mass Concrete (Reported by ACI Committee 207, 2007) [Google Scholar]

[4] N. Aniskin, T.C. Nguyen, IOP Conf. Ser.: Mater. Sci. Eng. 1030 012144 (2021) [CrossRef] [Google Scholar]

[5] J.K. Kim, K.H. Kim, J.K. Yang, Comp. & Struc. 79(2), 163–171 (2001) [CrossRef] [Google Scholar]

[6] S.G. Kim, Effect of heat generation from cement hydration on mass concrete placement (Graduate Theses and Dissertations, Iowa State University, 2010) [Google Scholar]

[7] Japan Concrete Institute, Guidelines for Control of Cracking of Mass Concrete (Reported by JCI Committee, 2016) [Google Scholar]

[8] TCXDVN 305:2004, Mass concrete - code of practice of construction and acceptance (Vietnam, 2004) [Google Scholar]

[9] N.A. Aniskin, T.C. Nguyen, Vestnik MGSU [Monthly J. on Constr. and Arch.] 15(3), 380–398 (2020) [CrossRef] [Google Scholar]

[10] P.B. Bamforth, Early-age thermal crack control in concrete (CIRIA C660, London, 2007) [Google Scholar]

[11] X. Liu, C. Zhang, X. Chang, W. Zhou, Y. Cheng, Y. Duan, Appl. Ther. E. 78, 449–459 (2015) [CrossRef] [Google Scholar]

[12] M. H. Lee, Y.S. Chae, B.S. Khil, H.D. Yun, Appl. Mech. and Mater. 525, 478–481 (2014) [CrossRef] [Google Scholar]

[13] X. Bai, J. Li, Q. Pan, Appl. Mech. and Mater. 438-439, 569–572 (2013) [Google Scholar]

[14] N. Aniskin, T.C. Nguyen, IOP Conf. Series: Mater. Sci. E. 869 072028 (2020) [Google Scholar]

[15] Zhu Bofang, Thermal stresses and temperature control of mass concrete (Published by Elsevier Inc, 2014) [Google Scholar]

[16] B. Klemczak, A. Żmij, Mater. 14, 477 (2021) [Google Scholar]

[17] T.C. Nguyen, N.K. Ho, H.H. Tran., J. Sci. Tech. Civ. E., NUCE. 14(5V), 27–38 (2020) [Google Scholar]

[18] N. Aniskin, T.C. Nguyen, Q.L. Hoang, MATEC Web of Conf. 251, 02014 (2018) [Google Scholar]

[19] ACI-318-11, Building code requirement for structural concrete (ACI 318-11) and commentary (Reported by ACI Committee 318, 2011) [Google Scholar]

[20] American Association of State Highway and Transportation Officials (AASHTO), AASHTO LRFD Bridge Design Specifications (American, 2017) [Google Scholar]