EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 264 (2021) E3S Web Conf., 264 (2021) 03057 References
Open Access
Issue
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
Article Number 03057
Number of page(s) 7
Section Hydraulics of Structures, Hydraulic Engineering and Land Reclamation Construction
DOI https://doi.org/10.1051/e3sconf/202126403057
Published online 02 June 2021
  1. Kovacs C., 2018 Pole-Changing Windings for Close Ratio and 1:N Ratio Using the 3// Y/3//Y method. Advances in Science, Technology and Engineering Systems Journal 3 (4) pp. 241–253. DOI: 10.25046/aj030424. [CrossRef] [Google Scholar]
  2. K.G. Karimov. Methods for developing pole-changing windings for motors in controlled electrical drives in general use. Problemi Informatiki i Energetiki, 1, (1993) [Google Scholar]
  3. M. V. Cistelecan, L. M. Melcescu, H. B. Cosan and M. Popescu, “Induction motors with changeable pole windings in the ratio 1:4” International Aegean Conference on Electrical Machines and Power Electronics and Electromotion, Joint Conference, Istanbul, 2011, pp. 781–786, DOI: 10.1109/ACEMP.2011.6490700. [Google Scholar]
  4. Karimov K.G., Tupoguz, A. Method for Designing Electrically Aligned Windings in AC Machines. Electricity 1987, N° 9, pp. 29–38. [Google Scholar]
  5. Makhsud Bobojanov, Dauletbek Rismuxamedov, Furkat Tuychiev, Khusniddin Shamsutdinov, Khayotullo Magdiev. “Pole-changing motor for lift installation”. E3S Web of Conferences 216, 01164 (2020). [EDP Sciences] [Google Scholar]
  6. Bobojanov M.K., Eshmurodov Z.O., Ismoilov M.T., “Research of Dynamic Properties of Electric Drives of Mining Complexes” International Journal of Advanced Research in Science Engineering and Technology. IJARSET, Volume 6, Issue 5 May. India. pp. 9200–9207, (2019) [Google Scholar]
  7. K.G. Karimov, M.K. Bobojanov. “New pole-changing windings of asynchronous motors”. Magazine “Elektrichestvo” (Russia), 1996, N°1, Moscow, pp. 27–32 [Google Scholar]
  8. K.G. Karimov and M.K. Bobojanov, “New design of pole-changing windings for induction Motors for intense operating conditions”, Magazine “Electrical Technology” (United Kingdom), N°1, 1996, pp.19–28. [Google Scholar]
  9. M.K. Bobojanov, E. Bolte. Polumschaltbare Motoren: neue Perspektiven. “UNIFORSCHUNG” Forschungsmagazin der Universitaet der Bundeswehr Hamburg. 12.Jahrgang.2002. Seite 2-7. [Google Scholar]
  10. D. Rismuhamedov, F. Tuychiev, S. Rismuhamedov, “Pole-changing windings for turbomechanism engines” IOP Conference Series: Materials Science and Engineering 883 (2020) 012140. DOI: 10.1088/1757-899X/883/1/012140. [Google Scholar]
  11. Bobojanov M.K., Rismukhamedov D.A., Tuychiev F.N., Shamsutdinov H.F. and Magdiev H.G. (2020). Construction and analysis of the pole-changing windings for the pole pairs ratio 5/6 by method discretely specified spatial function. International Journal of Advanced Science and Technology, 29(7), 9206–9211. [Google Scholar]
  12. K.G. Karimov and M.K. Bobojanov, “Two speed induction motors with an improved design of pole-changing windings”. Electromotion'99. 3rd International Symposium on advanced Electromechanical Motion Systems; Patras, Greese, July 8-9, 1999, pp.35–38. [Google Scholar]
  13. M.K. Bobojanov, M. Sadikova, H. Hakan: “New pole-changing asynchronous generator for wind devices”, PEOCO 2007-First Power Ingeneering and Optimization Conference, Malaysia, June 6, 2007. [Google Scholar]
  14. K.G. Karimov, D.A. Rismukhamedov: “Two-speeds induction motors for the energy saving measures”, 6 th International conference on Engineering of Modern Elec-tric Systems.-Oradea (Romania), pp. 385–389, 2001. [Google Scholar]
  15. K.G. Karimov, M.K. Bobojanov, D.A. Rismuhamedov: “The methodology of construction and analysis of the electromagnetic properties of a pole switchable wind-ing”, Bulletin of TSTU, no. 3, pp. 71–78, 2004. [Google Scholar]
  16. H. Liu, J. Wang, Z. Zhang: “Performance analysis of variable speed multiphase induction motor with pole phase modulation”, Archives of electrical engineering, vol. 65 (3), pp. 425–436 (2016). [CrossRef] [Google Scholar]
  17. M.K. Bobojanov, D.A. Rismukhamedov, F.N. Tuychiev: “Development of a polechanging winding for a 5/6 pole ratio at 108 stator slot using the DSSF method with additional branches”. Bulletin of TSTU, No. 1 (106), pp. 57–63, 2019. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.