EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 264 (2021) E3S Web Conf., 264 (2021) 04008 References
Open Access
Issue
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
Article Number 04008
Number of page(s) 7
Section Mechanization, Electrification of Agriculture and Renewable Energy Sources
DOI https://doi.org/10.1051/e3sconf/202126404008
Published online 02 June 2021
  1. Rakhmonov K.K. Preliminary processing of light industrial raw materials, Publishing house polygraph, Bukhara (2018) [Google Scholar]
  2. Newman A.B. The drying of porous solids, Diffusion calculations, Chem. Eng. 27, pp. 310–333, Trans. Am. Inst. (1932) [Google Scholar]
  3. Teshaev M.K., Safarov I.I., Kuldashov, N.U., Ishmamatov, M.R., Ruziev, T.R. On the Distribution of Free Waves on the Surface of a Viscoelastic Cylindrical Cavity, Journal of Vibrational Engineering and Technologies, 8(4), pp. 579–585, (2019) [Google Scholar]
  4. Rakhmonov K.K., Fayziyev S.K. Improvement of equipment and technology of drying of the cotton mass and its technological assessment on the basis of its thermal properties, International journal of advanced research in science, engineering and technology. 6 (5), pp. 9496–9500, May 2019 [Google Scholar]
  5. Fayziyev S.K., Rakhimov K.K. Creation of a New Design of a System for Feeding raw Cotton to a Cylinder, International Journal of Recent Technology and Engineering (IJRTE), 8(4), pp. 12753–12759, November (2019). [Google Scholar]
  6. Rakhmonov K.K., Fayziyev S.K., Study of Effect of Speed and Temperature of the Drying Agent in the Feeder-Loosened of New Design on the Quality of Fiber, International Journal of Emerging Trends in Engineering Research, (8). X 10, pp. 7008–7013, October (2020) [Google Scholar]
  7. Rakhmonov K.K., Fayziyev S.K., Qodirova D.K.: Device for feeding and drying raw cotton, Patentfor useful model. FAP 01544. [Google Scholar]
  8. Safarov I.I., Teshaev M.K., Boltayev Z.I. Propagation of linear waves in multilayered structural-Inhomogeneous cylindrical shells, Journal of Critical Reviews, 7(12), pp. 893–904, (2020) http://jcreview.com/ [Google Scholar]
  9. Teshaev M.K., Safarov I.I., Kuldashov N.U., Ishmamatov, M.R., Ruziev, T.R. On the Distribution of Free Waves on the Surface of a Viscoelastic Cylindrical Cavity, Journal of Vibrational Engineering and Technologies, 8(4), pp. 579–585 (2019) https://link.springer.com/ article/ 10.1007/s42417-019-00160-x [Google Scholar]
  10. Safarov I., Teshaev M., Toshmatov E., Boltaev Z., Homidov F. Torsional vibrations of a cylindrical shell in a linear viscoelastic medium, IOP Conference Series: Materials Science and Engineering, 883(1), pp. 012190 (2020) [Google Scholar]
  11. Fayziev S., Rakhmonov, K., Rakhimov, K., Ibodullaev, O., Mirzoyeva, S. Theoretical, practical and experimental research on the creation of an energy-saving universal screw in a new design of the transfer line of the drying drum of raw cotton, THE SCIENTIFIC JOURNAL “THE ARCHIVIST” Tom 7 X 1 (55). pp.42–49 [Google Scholar]
  12. Rakhmonov K., Fayziev S., Rakhimov K., Toyirova G., Mirzoyeva S. Screw mixerfeeder for drying drum, SCIENTIFIC ELECTRONIC JOURNAL” MATRIX OF SCIENTIFIC KNOWLEDGE, X. 1-2/2021, pp. 68–73, January (2021) [Google Scholar]
  13. Fayziev S. Theoretical studies of the process of drying raw cotton in drying drums. Academy. Scientific and Methodological Journal 4(43), pp. 15–18, April (2019) [Google Scholar]
  14. Fayziev S.K., Rakhmonov K.K., Rakhimov K.K., Mukhtarova Z.N. Improving the transfer network of raw cotton to the drying drum, International Journal of Advanced Research in Science, Engineering and Technology 7(11), pp. 15578–15583, November (2020) [Google Scholar]
  15. Mirsaidov M.M., Safarov I.I., Teshaev M.K., Boltayev Z.I. Dynamics of structural-Inhomogeneous coaxial-multi-layered systems cylinder-shells, Journal of Physics, Conference Series, 1706(1), 012033 (2020) DOI: 10.1088/1742-6596/1706/1/012033 [Google Scholar]
  16. Rajabov O. I. Abrorov A.S. Mirzaqulova N. I. Zaripov G.B. Ziyodullaev K.S., An experimental study of the location of the grid bars cells installed under spiked cylinders in a cotton cleaner from small waste, IOP Conference Series, Materials Science and Engineering, 734(1) p. 012073. (2020) [Google Scholar]
  17. Rajabov O.I. The influence of the mode of movement of the pieces cotton when interacting with a cotton grid, International Journal of Advanced Research in Science, Engineering and Technology, 6(3), pp. 8455–8381, India (2019) [Google Scholar]
  18. Abrorov A., Kuvoncheva M., Rajabov O., Mukhammadov M., Jumaev, S. Method of thermal treatment of saw disk teeth of fiber-processing machines by laser quenching. IOP Conference Series, Materials Science and Engineering, 862, p. 032034. (2020) [Google Scholar]
  19. Urinov N., Saidova M., Abrorov A., Kalandarov N. Technology of ionic-plasmic nitriding of teeths of disc saw of the knot of saw cylinder, IOP Conference Series, Materials Science and Engineering, 734(1), (2020). [Google Scholar]
  20. Rakhmonov K.K. The analysis of dynamics of the machine unit with the mechanism of the screw conveyor of the distributor of raw cotton, Science and practice: a new level of integration in the modern world, Conference Proceedings. B&M Publishing, pp. 45–49, USA, San Francisco, California, (2018) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.